IMac 24 end 2008

Similar Questions

• Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1)

  Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1) in order to prepare for Sierra

  I tried safe mode > disk utility, which took a lot of time and the disc seems to be OK.

  Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them.

  -What do you mean by? "Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them."?

  Did you delete anything?

  -The Mac can't you start mode (boot with the SHIFT key) safe?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Problems with an iMac 2013 end of printing

  I use an iMac 2013 end using the operating system of Yosemite. I have a Brother printer model # MFC - 7360N printer multifunction. Sometimes it will print a small portion of an e-mail, especially from the left side and not the entire document. I can't understand why. My computer is on a network at the office and if I try to use network printers, she will do the same. Help please!

  Open system preferences > printers and Scanners > print and then right or control click on the printer on the left, then click on: reset the printing system.

• iMac G5 end 2005

  Hi, I have also an iMac G5, end of 2005, and although it works very well for an older iMac, I've got troubles get Skype running, it simply didn't and also none of the two versions of OpenOffice 2.1 (too much), or any version of Microsoft found for this machine which I really like and I intend to sell if I can not both running

  I searched the internet for at least Skype running without success.

  Any help in these matters on your part? I had planned to keep it at home, another iMac for work, but the problem on the G5 processor...

  I hope to get help

  The most appreciated.

  software development is long over. 11 years in computers is like saying you have Philco TV from 1952 and want to know how to connect a HDMI adapter to allow the display of 4K.

  If you are planning keep this use of the machine the software developed for this and any system that requires a backend support like Skype; do not expect to work if MS makes changes to this software support systems.

• iMac 27 end of 2012 windows 7 installation problems.

  Dear Apple community.

  First of all I know that the topic was discussed a few more times, but after I tried to follow the instructions and directions and patterns almost everywhere on the net I am a blind spot.

  I have an iMac 27 "end 2012. I managed to install Windows 7 with Bootcamp through a combination of different methods, on line. (downloaded the Bootcamp Support 5.1.5621 software as described in many forums)

  But I am stuck because I always have problems with my UBS3 ports that do not allow my keyboard and graphic tablet to work (I had to uninstall the app in safe mode to return to UB2) and the resolution of the screen that is only 1280 x 720 at the arrow, trash and other stuff that appear distorted.

  Since I'm on some architecture and 3D modeling programs in Windows I want to ask for help because I don't really know where to look further.

  When I solve the problem, I promise to write here a detailed method to install win7 on iMac late 2012 for those in need.

  Can anyone help me to finally get a solution? Thanks a lot for your time and looking forward to hear that here you.

  Hi Polfus,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your Boot Camp installation. If you continue to have unexpected behavior of port connections and display resolutions in Boot Camp, you can find the troubleshooting steps in the following article useful (my apologies if you've seen elsewhere / fact them):

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

  You can also check that you are running the 64 bit version of Windows 7, as shown here:

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Concerning

• IMac 24 beginning 2008 compatibility El Capitan

  Hello

  Since I installed El Capitan on my 24 IMac early 2008, even though I have enough space and 2G of memory, computer stops responding and I have to restart twice or three times a day. I've already checked in an Apple Store and I know that my computer is OK.

  What should I do?

  Should I reinstall Yosemite?

  IMac 24 beginning 2008 is clearly not compatible with El Capitan because I didn't hurt before you install it.

  Thanks for your help.

  Christel

  The problem is more than likely that you have 2 GB of ram. The last OS X to run good in only 2 GB has been Snow Leopard. Your iMac can use up to 6 GB of ram and if you stay with El Cap, you will spend. If you are running any cleaning or the AV software that also negatively affect performance.

• iMac 27 "end 2013 - random stop

  My iMac 27 "end of 2013 - have this problem to stop randomly, as power chord is out... randomly. I only can he start by plugging the power cable and wait for 5 minutes and then restarting it.

  When I explored the forum it seems the problem until 2010, it is a shame that the problem persists on a such expensive iMac after all these years and apple is unable to provide a definitive solution.

  My machine is less than a year, still under warranty, also under Apple Care, it took twice to the service center, here is the chronology of the events:

  -They have reset the SMC, PRAM, re-installed OS during the first visit, the problem persisted

  -Spent an hour on the phone support, yet once done a web-installation of the operating system, left ElCapitan to Yosemite, the problem persisted

  -Took it once again, they have replaced the main Board... the problem still persists

  I have read many theories online but no final solution. Here are some of the theories about what I found:
  -RAM 16 GB the origin of the problem... but mine is 8 GB

  -All slots of RAM is full... but mine has only 2 slots filled

  -It happens that the i7... but mine is a machine of i5

  -Could be because of the UPS, not having is not a good sinusoidal signal... wondering how to properly test it!

  Someone has encountered this problem and solved definitely... Please help, as I am losing confidence with the ability to engineer Apple to fix it... Wow! This seems strange, isn't it, most innovative and most valuable world company is unable to fix a common issue that many customers are faced with... and we lose confidence with them.

  I am in Bangalore in India, also need to check on the rights of consumers on this, any entries on this help because I think I deserve a replacement for the defective product. If it was the United States, if it is a lemon (take to solve the same problem 3 times)... even the cars is not replaced. Wonder how this works here. The lawyers on this forum?

  Fellow fans of Apple and mac fans (I'm one too!) Please help.

  Remove the UPS and test.

  Your iMac is having kernel panics? OS x: when your computer restarts spontaneously or poster "your computer restarted because of a problem." - Apple suppl...

  If this post a recent log of panic, they are often useful Mac OS X: how to connect to a kernel - Support Apple panic

• What is the max memory for an iMac in early 2008

  What is the max memory for an iMac in early 2008? MacSales.com shows a 6 GB kit, but crucial only shows a 4 GB kit.

  Thank you

  John

  The computer iMac (early 2008) has two SDRAM slots in the bottom of the computer and comes with at least 1 GB DDR2 SDRAM installed into a slot. The maximum amount of RAM you can install in the computer is 4 GB (a 2 GB SO-DIMM in each slot).

  Source:

  iMac (early 2008): specification of memory - Apple Support

• Add Ram iMac 27 end of 2012

  Hi guys.
  I have an iMac 27 "end 2012, 3.2 GHz Intel Core, RAM 16 GB DDR3 1600 MHz, NVIDIA GeForce GTX 1024 MB, model number A1419, EMC 2546 675MX.

  Now, I would add 8 GB of RAM (4 + 4 + 8 + 8) but in the Apple dealer says that's not possible... 32 GB or anything.

  Also I request the addition of an extra drive SSD (now the classic 1 TB HDD), but said that's not possible... only Fusion od SSD 1 TB drive.

  I am confuse...

  You have now two modules of 8 GB in the top two slots. Two slots are empty and you want to add two 4 GB modules. You can do it. The dealer won't. However, cost of the RAM is pretty cheap, and you're looking to add to 24 GB or 32 GB. How much more two modules of 8 GB will be plus two new modules to 4 GB? Just be sure to have the correct specifications:

  Maximum memory	32 GB
  Memory locations	4-204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM

  Reliable suppliers are OWC, DataMemand Crucial.

• can I change my graphics card? (iMac 27 end 2012)

  Can I change my graphics card? (iMac 27 end 2012)

  N ° it is a welded in the chip.  The only way to upgrade

  be replace logic card that contains a better GPU.

  With the cost and effort required, you may as well buy a recent

  iMac.

• Can I use stock RAM since the mid-2012 MBP aluminium end-2008 MB?

  This is my first post so I apologize if it is not posted in the right place.

  I have a late 2008 aluminium MacBook (2.0 GHz) with 2 GB of RAM and a mid-2012 MacBook Pro (2.5 GHz) with 4 GB of RAM.

  I want to upgrade the RAM of these two laptops, but in the most effective way possible. I wanted to buy an upgrade to 8 GB for my Macbook Pro for mid-2012, then use 4 GB of this machine to upgrade my end-2008 aluminium MacBook.

  Is it possible to use the RAM from mid-2012 MacBook Pro aluminum end-2008 MacBook? Would be great, if so.

  Thank you!

  Nope, totally different form.

• I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

  I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  Thank you

  Yes.

  (137273)

• iMac 24 "beginning 2008 A1225-graphic card replacement

  Hi all

  I would ask you if

  ATI Radeon 4670 256MB

  or

  AMD Radeon HD 6750 M 512 MB

  are compatible to replace the

  NVIDIA GeForce 8800 GS 512 MB

  on

  iMac 24 inch early 2008 A1225

  
  

  ?????????????????????????
  

  Thank you!

  # Also, it is not likely that your 8 year iMac is worth the cost repair.

• Track Pad problem end 2008 Mackbook Pro

  Hi all

  I was wondering if someone could help me,

  I have a mackbook 2008 end pro works great, however I have a problem with my track pad, which is a gift from my head in. IM using my mac now fine no problem however when I stop and start it upward a day later the touchpad is not responding. What I do is taken to the back of the case where the battery is and remove the 8 screws, I see that the ribbon cable is constantly of the touchpad, so I need to keep undoing the screws and re connect which is a pain. My question is how I g to get one of these and are they easy to set up. How do I know that this will not happen?

  Of which detaches, attached photos I reconnect

  I hope someone could help me on this issue as its been done for centuries and is such a pain.

  

  Thank you is all

  To replace this cable, you must replace the trackpad itself.

  This can be a painful process because you almost remove all to remove the trackpad. I guess that there is a way to fix the cable, so it's not unplugged.

  I use ifixit.com all the time to fix a MacBook Air at my school.

  Here is the link to replace your MacBook Pro trackpad. And also to buy the Trackpad.

  It is currently out of stock, but you can warn you when it comes.

  Good luck

• iMac 5K (end of 2014) is not supported this machine OpenCL?

  The iMac (retina 5K, 27 inches, end of 2014) with AMD Radeon R9 M290X 2048 MB graphics card would not support OpenCL?

  Yes. The Mac supports OpenCL. You ask because you heard something to the contrary.

  Russ