How do I know which control raised the event?

Similar Questions

• How do I know which port in the vSwitch the VM connect to?

  Hi Experts,

  How do I know which port in the vSwitch the VM connect to?

  If you have several natachasery as uplinks to your vSwitch, so you can see what physical switch your vm is attached to.  There is no direct way by ESX to see what Teddy is used by the vm if all the natachasery is active.  ESX will auto-affectation uplink based on politics, load balancing, but this information is not stored anywhere in a recoverable form.  You can always check the arp/cam/mac table on the physical switch.

  -KjB

• How do I know which node of the instance is this session connection to?

  Hello
  with PAP, how do I know which node of the instance is this session connection to?
  I want to I know which node I am connected.
  
  Thank you

  Select instance_number, instance_name, host_name
  from V$ instance;

  Concerning
  Asif Kabir

• How can I know which file is the use by the self-service workflow?

  Hi all:
  
  In my home directory, there are two HRSSA.wft and how do I know what source used by the workflow of self-service?
  
  my environment is oracle 11.5.9. self-service 4.1 | workflow Builder 2.6
  
  
  
  Thank you
  concerning
  Terry

  One way would be to download the HRSSA workflow in a wft file (using the WFLOAD - see MOS Doc 578248.1), and then comparing this downloaded file wft with the two files, you have (using a utility such as diff on Unix). The comparison that reported no difference will identify the wft which is uploaded into the database.

  HTH
  Srini

• How can I know which items in the Panel of Folio in InDesign are common?

  Is there a way to tell which of these items has been changed and must be updated?

  (Cannot display the screenshot of the Panel of InDesign Folio.)

  N °

• How to use interval set to raise the event every 5 seconds when if the statement is true?

  Here is a snippet of code something to im:

  if (MC_battleTrigR1a.hitTest(this._x, this._y, true)) {
       if (random(220) == 0) {
       //random(220) the code is onEnterFrame and so this random function is called repeatedly until eventually random(220) == 0;
       trace("random");
       gotoAndStop("battle");
       }
       //setInterval(???)
       //every 5 seconds->  trace("5sec"); and gotoAndStop("battle");
  }
  

  The player wanders in a box, in a random delay or after 5 seconds, it should send the player to the frame labeled: battle

  It works with the random (220) but I don't know how to do certainly go to frame: battle after 5 seconds.

  I don't know how to use setInterval correctly, I tried and failed.
  The code is nested in the onEnterFrame
  FPS: 24

  image tag: treePath

  Chassis number: 17

  I didn't say that you should avoid using onEnterFrame.  I said that your setTimeout must be outside your onEnterFrame loop:

  var tl:MovieClip = this;
  
  tl.onEnterFrame = function () {     if (MC_battleTrigR1a.hitTest(MC_player._x, MC_player._y, true)) {          delete this.onEnterFrame;          clearTimeout(gotoBattleTO);          gotoBattle();     }};
  
  
  

  function gotoBattle() {     clearTimeout(gotoBattleTO);     delete tl.onEnterFrame;     gotoAndStop("battle");}
  

  
  var gotoBattleTO:Number = setTimeout(gotoBattle,5000);
  

• I can't get online to find the right drivers for my Dell Latitude D610. How will I know if one on the 'list' are good and the one to use?

  Ideas:

  • disk not has not automatically give the drivers.
  • He just tells me to reinstall the driver, I can't go to the line, the only option that works is to choose from a list... How will I know which drivers are the right ones?
  • I recently changed from vista to xp media
  • I only watched, without understanding, not having lists don't have no idea what to do.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  You can try to download and run SIW which might tell you what hardware is in your computer, or you could just try each driver until you get one that fits the... Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• How do I know which programs to take off the windows Installer CleanUp list?

  Windows Installer Cleanup of

  * original title - how do I know which programs to take off the windows Installer CleanUp list? I don't want to uninstall or remove a program that I always use currently__ *.

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301 (MS Office only - replaced by the 'Fix It' utility)
  (Note: the Windows CleanUp utility has been replaced by the "Fit It":http://support.microsoft.com/fixit/ )

  The Windows Installer Cleanup utility:
  It was created to correct software installations that failed during the installation process and leaving a bunch of files (including a file name that ends with an extension .msi (= MicroSoft Installer .msi). For example an installation failed MS Office (note I said "failed").
  See: http://office.microsoft.com/en-us/help/HA011185721033.aspx

  Also if when you installed MS Office you decided at the time you had no need of Power Point and chose not to install it. You find out later you need to make a Power Point presentation, insert the Office CD and try installing PowerPoint and it causes an error.

  The tool using Windows Installer Cleanup will remove damaged installation files (located in C:\Windows\Installer). You then install Office and Power Point, once more, as they are not more present in the list of programs in the Add/Remove Control Panel. But at least this time Office and Power Point will install without errors as the Windows Installer Cleanup utility did what it was designed to do.

  The unfortunate side effect of the cleanup tool is when you select and delete software that works correctly you then will no longer be able to install this software because it is no longer in the Add/Remove Programs list.

  Now as to why there is so many files in the C:\Windows\Installer:
  You will find lots of them. MSI files belong to software such as Java, Microsoft .NET Framework software AV, Norton Ghost, file downloaded during a Windows Update session and so on. It would seem that some software will clean up after itself and deletions, this is the file that were in the folder C:\Windows\Installer. Windows Update failure will create and leave the folders and files behind every time that you try to install the update and so you could end up with a large number of files taking up disk space.

  It could also be a lot of files (is most needed) orphans.
  If you still have the original Windows Installer Cleanup utility, and then by using the msizap (msizap g!) command removes all cached Windows Installer data files that have been orphaned.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How do I know which imported media are in the timeline in the project tree?

  I have so many clips, once the media is imported in project, how do I know which media is in the timeline?

  Wear in show used media ranges or something like in the view menu.

• How to know which update causes the system crash

  Can you tell us how to check the update is the culprit?

  Hi Steve,.

  Inorder to know which update is the cause of the crash of the system, you can install the updates one by one. Firstly uninstall the updates that have been recently installed.

  Uninstall the update:

  1. click on start and type "update installed" in the searc box. Click on view installed updates

  2. right click on the update you want to uninstall. Once the uninstall is complete, reboot the computer.

  3. install the updates one by one.

  You would get to know what update is at the origin of the disorder. You can hide this particular update.

• I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  The serial number of the computer has nothing to do with the product key for Windows.

  What happened when you tried to install Xp with sp3? If you do not have the original for the computer that you use to install Windows?

  You can try to contact the manufacturer of the computer who may be able to provide the recovery disc. The disks are usually under $ 20.

• In Windows 7, cannot delete the file "cannot complete this action because a file or a folder it contains is open in another program" How do I know which file or folder?

  It comes to windoows 7 that I am trying to remove a user and windows says it can't because a file or folder is open in another program but what island or folder?

  * original title - cannot remove the file the action cannot be completed because a file or folder it is open in another program. What file or folder? How will I know which file or folder? *

  Hello

  Try the steps mentioned below and see if it helps:

  Step 1:

  You can view all programs currently running on your computer in the Task Manager.

  Check if there is any process related to the file running is running. If you find any, do a right-click on the process and end it.

  Access the link for more information about the error you get below:

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-delete-a-file-or-folder

  Step 2:

  You can also try to remove the file getting mode without failure.

  Access the link below to learn more about Safe Mode:

  Start your computer in Mode safe:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

• In Task Manager, how can I know which processes are running in the background?

  In Task Manager, how can I know which processes are running in the background?

  Hello.

  What exactly is your problem?

  Details please! Thank you.

  • When you open the Task Manager, go to processes
  • under the seat of tab CPU reading 01, 02, or higher... that's how you know what programs are underway on the bottom.

  Helped?

• When I turn my library of music in format mp3. I have duplicates.how can I know which songs are mp3

  I have a mp3 player.i sansa player - tunes doesn't recognize Sansa, so I need to transfer my music in windows media player. to do this I need to convert all my music in mp3 format.when I do that, then I can burn all my music and import to wmp.question is that when I convert to format mp3, how will I know which songs are mp3?

  You can create a smart playlist which, for example, collecting files converted based on the date that they are added to the library. It depends on how you want to proceed. If you want to permanently convert, I have a script called ConvertFormat which range the originals after conversion. Alternatively, you can temporarily change your media to the converted files folder are stored in a folder of new media, then once the process is complete you may add these files to your WMP library, reset the media in iTunes folder and delete the new additions to iTunes library, thus separating the two libraries.

  TT2

• No other event in Photos? How will I know which photos belong to what album?

  My question is simple as that. I would like to organize my photos in folder/album/designated events everything must be located.

  Currently, it seems that I am unable to see what photos are belongs to what album when it is in mode "last import" or "photo".

  When I download tons of pictures and that you want to organize them here and there and when it does not show which photo belongs to where I'm really confused if it's worth to do that in photos.

  How can I know which photos belongs to which folder / album / event among tons of pics?

  I hope that there is an answer!

  Moments have replaced the events, and they are automatically created according to the date of capture and the location.  You can always find the moment that photo is with 'display in the Moment '.

  You can create albums and smart albums and folders and more moments, but it is not possible to show what photo albums has been added to the.

  That's why I mainly use keywords and smart albums. The keywords appear in the Info Panel, so I can see which picture belongs to smart albums.

  I only use standard for albums albums that I want on my iPhone and the iPad, because the smart albums does not synchronize mobile and these devices that I created as copies of smart albums.