How to use interval set to raise the event every 5 seconds when if the statement is true?

Similar Questions

• How to use setViewportBounds (Bounds value) to the ScrollPane?

  How to use setViewportBounds (Bounds value) to the ScrollPane? This method is, visually, what for? I tried to put a specific Bounds.minY to have a precise scrolling in the axis Y in vain. I use the setVvalue() method to scroll, but it is not convenient to exactly locate a position in the coordinates of the node content listed in the scroll pane.

  The viewportBounds are the limits of the viewport (i.e., the visible part of the content) in the scrolling pane itself, if I understand correctly. The way to access programmatically is by setting the vValue property.

  I have not tried, but if you do something like

  scrollPane.setVmin(0);
  DoubleBinding vmax = new DoubleBinding() {
       { super.bind(scrollPane.viewportBounds(), content.heightProperty()); }
       @Override
       public double computeValue() {
          return content.getHeight() - scrollPane.getViewportBounds().getHeight() ;
       }
  };
  scrollPane.vmaxProperty().bind(vmax);
  

  to configure your component to scroll, then you can call setVvalue (...) and just pass a location of coordinates for your content node. This assumes that your content node is a region or a control; you will have to perhaps a little logic in the method computeValue() to deal with the cases where the display window is greater than the additional content.

• How to use windows search to search the contents of a bunch of files with random names / extensions?

  How to use windows search to search the contents of a bunch of files with random names / extensions? Plain txt files say 1,000 with random name of file extensions?

  You can always search within those, but you need to add extensions to the file system so that it knows to look inside these files.  You said that you have a lot, so it's perhaps tedious.  Here's How to search within several types of files.

  One thing you could try is rather to make a copy of this file, rename all the files to the same extension (even an extension false for example something.bill) and perform your search on this band.  Just an idea.

• How to use a form created on the Capture of a vector

  People, I'm having difficulties to find out how to use a form created on the Capture of a vector. For example, I open Illustrator on my desk and, although the form is saved in a creative library of clouds, I can't find how to open this archive as a vector. I tried everything from capture, but then I can just export the shape as a bitmap image. I'm really lost on this.

  Hello Cristina,

  In Illustrator, simply drag the shape of your library panel in an open document. That's all there is to it.

  Mike

• How do I monitor/find where is the State of my download?  I don't know how long it takes or if there is a problem with the download that I can't find anything.  Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder

  How do I monitor/find where is the State of my download?  I don't know how long it takes or if there is a problem with the download that I can't find anything.  Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder?  Where can I find that when it's done download?

  Could you please confirm the operating system you are using.

  You can see the status of the application of CC desktop download.

  The CC app desktop click the creative cloud icon located in the taskbar (Windows) or the Apple bar (Mac OS) menu, to open the creative cloud desktop application.

  Hope this will help you.

  Kind regards

  Hervé Khare

• How can I reset my R7000 in the State in which I out took it of the box?

  How can I reset my R7000 in the State in which I out took it of the box? Why am I asking? The latest version of the firmware has destroyed the connectivity and performance of my router. I'll have to deal with the devices that can not connect, devices that fall, extremely poor performance, etc. It's just a disaster.

  I've been with Netgear 5-6 years and had to do something last night, I have never had to do before - I had to go back to an earlier version of the firmware. Honestly, very little worked well. The previous version of the software has a few hiccups here and there, but the new version is just a nightmare.

  Now that I have applied even if an earlier version of the firmware, I can still see some of the latest options which were not there before. I have taken note that the firmware was now the prior publication, but the GUI is still the current version.

  Just to give a time frame on my Nexus 5 running 802.11ac, prior to the current version, I could peg 90Mbps +. Since the new version, the best I can do standing right next to the router is 24Mpbs +. Even after the restoration of the previous firmware, the speed is always the same.

  So, I want to return the router to the shape that when I took it out of the box, apply the previous firmware and reset up if necessary. I want to just my router back prior to the most recent release that destroyed. Once again, that the release had a few hiccups, but it was still usable.

  The 30-30-30 reset method works on most routers out there, but not on the R7000...
  The correct way to reset your R7000 at the exit of the State of the box is...

  Download the original version of Netgear R7000 Support HP http://downloadcenter.netgear.com/en/product/R7000(Firmware Version 1.0.0.96)

  Reset and flash back of any Stockfirmware on the original Stockfirmware:

  Power on the router
  Wait a few seconds
  Press Reset for 5-8 seconds max! **
  connect to 192.168.1.1
  Flash the original FW
  now that the router restarts
  Wait a few seconds
  Press Reset for 5-8 seconds max! **

  * After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.

  Now, it's as out of the Box.

  Reset and flash back to any DD - WRT FW to Stockfirmware initial:

  Power on the router
  Wait a few seconds
  Telnet to the router
  Run the commands:
  'clear the NVRAM '.
  'reboot '.
  Wait a few seconds
  connect to 192.168.1.1
  Flash the original Stockfirmware through the Administration tab (if the upgrade fails and the site is not available, try another browser such as Firefox, chrome, safari)
  now that the router restarts
  Wait a few seconds
  Press Reset for 5-8 seconds max! **

  * After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.

  Now, it's as out of the Box.

  I have reflashed several R7000 to initial Stockfirmware as the last FW with Beamforming was not stable enough after several days/weeks testing... The FW showed massive connection drops after 24 hours and only a reboot of the router fixed it (tested on 3 x R7000)

  The connection has dropped from 1300 to 66-256 after several hours...-. -.

  Now I'm waiting a new FW version with corrections of Wifi of Netgear.

• Satellite A210 - 16G (PSAELE) - how to use 4 GB and update the BIOS?

  Hello! I hope someone can answer a few questions for me.

  First of all is: How can I turn on my laptop to use all the 4 GB of RAM? OS is Win Vista Ultimate 32-bit with Service Pack 2. Now Vista all show the 4 GB of RAM, but don't use it. I activated the EAP in Vista, but still nothing. As I saw, I need to turn it on too memory remapping in BIOS but there is no option (my BIOS is ver.1.70).

  The second question relates to the BIOS. Because my version is 1.70 and there are more recent version 2.00; I get benefits if I update to BIOS? Someone has updated to version 2.00? And there are more options in the BIOS after update to version 2.00 (for example the memory remapping or a similar option)?
  I'm a little afraid to update BIOS, because sometimes my Toshiba freezes, and I would not hang during the update of the BIOS.

  And the final question is there any changelog to the BIOS? So I can see what is added and changed, and what's new in the new version of the BIOS. Because I could not find anywhere.

  Thanks for the responses to come.

  Hello!

  (1) you can use the entire 4 GB of RAM on a 32 bit OS. It is a due limitation of 32-bit technology. Windows Vista with Service Pack 2 may recognize the full 4 GB of RAM but not use it, more than 3.2 g.
  Here you can find more information about this limitation:
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  (2) about BIOS updated I can tell only must be made only if you have problems with the laptop. A BIOS update should never be done just for fun, because it of still a little risky. In the worst case, you can destroy the ROM module or complete motherboard.
  Update the BIOS doesn't normally contain new features or options. It s bug just setting. In addition it can t solve the problem with 4 GB of RAM and Vista 32 bit if you think that ;)
  If your laptop does not have 100% stable you shouldn't t update because it s too risky. Before the update, you should try to solve the problem of gel.

  (3) If a change log is available you can find it on the Toshiba site. If you can t find, there isn t available.
  That s all about this.

  I hope I could help a bit.

  Good bye

• How to use an internal counter of the cDAQ-9172 for measure PWM and generate the frequency?

  Hello

  Requirement of my project is to measure 6-channel PWM and generate 5 frequency channels.

  Suggestion of engineer OR bought cDAQ-9172 chassis and NI 9423 (8 DI correlated) and NI 9474 (8 correlated DO) for this requirement. I have a few questions

  Article:

  1 > what should I know to customize my CompactDaq 9172 chassis

  http://zone.NI.com/DevZone/CDA/tut/p/ID/9367

  I know that this way to synchronize the physical support 32 correlation system pin o for housing 1-4.

  => I'm not really sure how to use these channels synchronization support.

  2 > using internal counters on one NOR cDAQ-9172 as a sample for other tasks clock

  http://digital.NI.com/public.nsf/allkb/ADFC4DD8C9690232862575B70079FBD4

  I know that I can change the ownership of the physical channel so I can get 2 meter outside the frame 6 and 7.

  => I do not think that this solution will be me because I can use only 2 counters with this method.

  Could someone tell me please how to fix my project requirement? How to choose the setting for DAQmx screws?

  I have experience with measure the PWM and generate the frequency, but with separated against only.

  Best regards

  Thang Nguyen

  Hey Thang.

  AHA... for this, you can use the channel property node.

  

  See you soon

  Lab

• How to use outside of class in the packed library plugins

  I found the article very useful to Michael Lacasse (https://decibel.ni.com/content/docs/DOC-19176) how to use the library packaged as plugins. This approach makes the most sense when you try to distribute additional code after that your executable is already installed.

  My problem is that when I try to use a class from the main code in a plugin, plugins no longer works. Ideally, I would have liked the parent plugin interface to inherit from a class that is used in the main code, either by using the class as parameter of the plugin would be the next best thing.

  I had several mistakes, some runtime (#1448) or at the time of publishing ("VI it does not match other screws in the method: connector side terminal (s)"). I set to use clusters to transfer data to the plugins.

  My question is: is it possible to use a class defined in the main code in a packed-project-library, either inherited or as a parameter? If Yes, do you have any examples?

  It is not made with real CLASS structures, but I do the same with PPLs.

  Don't try to inherit from something in the MAIN host.

  Create the ancestor class in a separate PPL.

  Use it for the most PART, as it is.

  Inherit it in your modules.

• How to use an option button in the report of the IR to redirect itself to view another report

  IHH team, I have a requirement where I have an IR report option button. By clicking this radio button, another report appears under the main report with few other details of the selected item. The idea was to have a zoom of report as seen in the Group of MS Excel.  However, I am stuck because I don't want the user to press the "submit" button each time after selection of a radio button. I want the result to Report2 to change on the selection radio button in report 1.

  Please notify.

  Kind regards

  Samar

  for example

  Report1 details

  RB col_id text1 text2 Text3

  1 . abc erd 45

  2 ghj dfgrt 67

  Suppose the user selects the first option button, the page displays another report with details below the main report

  Report1 details

  col1_id text1 text2 Text3

  RB1 1 abc erd 45

  2 RB2 ghj dfgrt 67

  Report2 details

  col1_id col2_id text1 text2 Text3

  1 11 ihj pkpk 78

  1 23 ljl kpk 45

  user6255521 wrote:

  Please update your forum profile with a real handle instead of 'user6255521': Video tutorial how to change username available

  When asking a question, always include the information referred to in these guidelines: How to get the answers from the forum

  I was able to achieve using the linl. I created a link on the col_id and it redirected to itself after you set the value of col2_id. I also changed the style of the button link and so col1_id looks like a button.

  However, I was interested to know if we can achieve this with a radio button and use the update form the Report2.

  You mean like this? It is very simple to implement using dynamic measurements.

  1. Add a column of radio group to the main report:

  select
      apex_item.radiogroup(1, d.department_id) rbg
    , d.*
  from
      oehr_departments d
  

  APEX 5.0, apply a static ID "rbg" to the column of radio group.

  2. create a hidden page unprotected element to maintain the value of the selected radio button to use as a filter in the detailed report. In the example, it is P31_DEPARTMENT_ID.

  3 refer to the element of filter in the WHERE clause of the report detail:

  select
      *
  from
      oehr_employees
  where
      department_id = :p31_department_id
  

  Set the Items property of the Page to send in the definition of report P31_DEPARTMENT_IDretail area.

  4. create a dynamic action of change on the Group of radio buttons:

  Event: Change

  Selection type: jQuery Selector

  jQuery Selector:td[headers="rbg"] input[type="radio"]

  Real Actions

  Seq: 10

  Action: Set value

  Type of value: Expression of JavaScript

  JavaScript expression:$(this.triggeringElement).val()

  Selection type: Article (s)

  Point: P31_DEPARTMENT_ID

  Seq: 20

  Action: Discount

  Selection type: Region

  Region:

  The best way to get help with something like that is for you to reproduce the problem with an example on apex.oracle.com. Set up as much as you can before posting here and when you post the question, share identification information of developer comments for the workspace so that we can see the example and work the solution directly.

• How to use two different versions of the stub of Web Services SDK files in a single project (5.5 and 6.0)

  Hello

  I have a project that uses the vSphere 5.5 management SDK (I built the stub files according to the documentation) and have these in my c# Solution. Everything works beautifully. My class files that interact with vSphere all have a use statement as follows:

  using Vim25Api;

  All fine so far.

  Now, I want to be able to provide support for a user to connect to vSphere 5.5 and 6.0 vSphere environments. I built the stub files for vSphere Management 6.0 SDK and those in my solution presented in a separate project. Each project is based on a different class library and I have each set of files for each version of vSphere stub in different NuGet packages. However, when I select to use a vSphere 5.5 connection, it seems that internally the 6.0 files stub are used, or vice versa.

  I tried to separate things out by giving the Vim25Service.dll and Vim25Service.XmlSerializers.dll files for each version of alias names (alias by default for all assemblies is "global", but I changed it to vSphere5 and vSphere6 for each version. Then at the top of each class file before all with what I'm doing:

  extern alias vSphere5;

  or

  extern alias vSphere6

  (According to what project I'm in). Then, use the using statement for each class file that interacts with vSphere using vSphere5::Vim25Api; or using vSphere6::Vim25Api; to use the files to correct/stub namespace for each version I support.

  However this still doesn't seem to work, and things seem to be getting confused upwards somehow. I take a guess that internal files make calls and somehow have crossed.

  Is it possible to use two stub version of vSphere together different files in the same project? How should I handle my script? I thought of just upgrading to use the version of vSphere 6 (I can always connect to vCenter 5.5 using these, but some of the properties on the object have changed, (for example some dynamic properties on AlarmObjects and other items have been removed and code breaks if I delete the references to the stub vSphere 5.5 files.) So, I want to keep two different versions and use each of them separately in the same solution, so I support vSphere 5.5 and vSphere 6.

  Solved - this using wsdl.exe and just by specifying a different namespace to use in the proxy class that is generated by using the /n switch.

  for example using PowerShell to build automatically, the value $VimApi and do:

  WSDL.exe/n:$ VimApi...

• How to use MouseEvent and KeyboardEvent on the same function?

  It's maybe a stupid question, but I'll ask her.

  I did a login (textfield and a button).

  mybutton.addEventListener(MouseEvent.CLICK, loginCheck); It's my button

  function loginCheck(event:MouseEvent):void {}
  My code for the function here

  }

  In order to make the connection by using the Enter key, I tried to add:

  myText.addEventListener (KeyboardEvent.KEY_DOWN, keyEnter);
  function keyEnter(event:KeyboardEvent): void
  {
  If (event.keyCode is Keyboard.ENTER)
  {
  loginCheck();
  }
  }

  But of course it won't work because loginCheck is a function of MouseEvent.

  How can I make it work?

  It does not appear that you will use one of the properties of type event mouse or keyboard in loginCheck, right? Then, you can simply set the type of the parameter in loginCheck() to the event instead and add the event argument in keyEnter() when calling loginCheck() from here-> loginCheck (event).

  rmybutton.addEventListene (MouseEvent.CLICK, loginCheck, false, 0, true); It's my button

  function loginCheck(event:Event):void {}
  logic of connection here

  }

  myText.addEventListener (KeyboardEvent.KEY_DOWN, keyEnter, false, 0, true);
  function keyEnter(event:KeyboardEvent): void
  {
  If (event.keyCode is Keyboard.ENTER)
  {
  loginCheck (event);
  }
  }

  TS

• How to use af:poll to ensure the security of session?

  Hello...
  I m using Jdev 10.3.1.2 + ADF business components, and I am facing the problem with the session expires in 4 or 5 minutes.
  How can I use af:poll to ensure the safety of the session of my application?
  Thank you
  Willian

  Hello

  You can define a poll on a page component, and its value is set under 4 minutes. When the survey triggers event it sends a notification on the server. Failed after 4 to 5 minutes session is, however, a problem with the network or server configuration.

  Frank

• How to use bidirectional I/O in the CLIP of LabVIEW FPGA?

  How to use or define two-way i/o for CLIP with LabVIEW FPGA? I want to use 1-wire communication inside the kernel CLIP, the function will be implemented to read and write as I/O inside the CLAMP.

  The XML Generator (CXG) 1.1.0 ELEMENT does not support.

  Thank you

  Supawat

  Work after separate IB pin (bidirectional) at the entrance and exit. Thank you.

• How to use in LabVIEW DLL of the third

  Hi all

  Using maxon EPOS 2 (positioning system easy) to order the EC motor. It comes with Windows 32 - Bit DLL for labVIEW. How to use these anointings of library in labVIEW correctly? When I try to call the function of library in a LabVIEW program, it shows me a warning about a caller and if the Subvi is not executable. Do I have to change the location of files library or make any other change?

  Have you seen the KB: program a control EPOS of Maxon use LabVIEW ?

  Christian