How to know which update causes the system crash
Can you tell us how to check the update is the culprit?
Hi Steve,.
Inorder to know which update is the cause of the crash of the system, you can install the updates one by one. Firstly uninstall the updates that have been recently installed.
Uninstall the update:
1. click on start and type "update installed" in the searc box. Click on view installed updates
2. right click on the update you want to uninstall. Once the uninstall is complete, reboot the computer.
3. install the updates one by one.
You would get to know what update is at the origin of the disorder. You can hide this particular update.
Tags: Windows
Similar Questions
-
Satellite L655 - upgrade RAM causes the system crash
I bought and inserted 2 RAM Kingston 4 GB chips. When I boot the Windows and Ubuntu 14.04 (I have a dual boot) fails.
If I run a test memory Ubuntu start menu, the system hangs.
I put the old RAM and all is well.
To resolve this problem, I tried upgrading the BIOS firmware using the software available on the Toshiba site, but it gives me an error saying that the battery must be fully charged and the power adapter is connected. A fully charged battery with the charger plugged still gives the same error. I replaced the battery, which was old and lasted 5 minutes, but the error remains on the upgrade of the bios.
Any ideas what could be causing this would be appreciated.
Can I get hold of a BIOS upgrade CD ISO which does not check the status of the battery and the charger? I promise you I will not let the of of the machine while upgrading the bios is going forward!
Thanks in advance.
Hello
At first, I must say that updating the BIOS won't help you any. Many people think that the update of the BIOS is a kind of "quick fix" for different questions.
In my opinion there must be a compatibility problem. Did you buy the memory right modules approved for your system?I don't know what 665 do you have exactly, but I think that you need the modules of DDR3 - 1066 MHz and 4 GB of RAM has part number PA3677U-1M4G.
-
10.11.5 update fails, the system crashes after update
iMac 27 "end 2015, SST 1 GB, 32 GB of RAM
After update 10.11.4 via App Store 11.5 system hangs on commissioning, all programs seem to have disappeared (they are still on the drive, but cannot be started). Tried to reinstall 11.4, works fine and all is well. Reinstall the update brings back the problem. Cannot start in safe mode. Tried to download the full OS x and install it, same problem as with the update. Not yet tried a clean install.
someone has an idea to solve this?
I have exactly the same problem. Unfortunately I do not have a Time Machine to return to backup.
-
How to know which programs are connecting to the internet?
Hello
How to know which programs or files are connected to the internet, including files and programs Microsoft?
Thanks and greetings
In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select the performance tab, click the resource monitor and Network tab. Network connections are included.
-
Would like to know which table in the repository contains the value of the operating system
Hello
I would like to know which table in the repository contains the value of "Owner operating system".
Any ideas.
Thank you
PaulThe following query should help you:
SELECT t.target_name agent_name, cm.string_value mgmt_targets Os_User t, mgmt_metrics m.
cm mgmt_current_metrics WHERE t.target_type = 'oracle_emd. '
AND m.target_type = 'oracle_emd' AND t.target_guid = cm.target_guid AND cm.metric_guid = m.metric_guid
AND m.metric_name = 'EMDIdentity' AND m.metric_column = 'username' AND m.type_meta_ver = t.type_meta_ver;Best regards
Vincent -
How do I know which port in the vSwitch the VM connect to?
Hi Experts,
How do I know which port in the vSwitch the VM connect to?
If you have several natachasery as uplinks to your vSwitch, so you can see what physical switch your vm is attached to. There is no direct way by ESX to see what Teddy is used by the vm if all the natachasery is active. ESX will auto-affectation uplink based on politics, load balancing, but this information is not stored anywhere in a recoverable form. You can always check the arp/cam/mac table on the physical switch.
-KjB
-
How do I know which node of the instance is this session connection to?
Hello
with PAP, how do I know which node of the instance is this session connection to?
I want to I know which node I am connected.
Thank youSelect instance_number, instance_name, host_name
from V$ instance;Concerning
Asif Kabir -
Restart causes the 'system thread unhandled exception '.
Freezes in Windows 8. Restart causes the 'system thread unhandled exception '. Windows restores successfully to earlier restore point start, but the questions is recurring.
3 crashes so far because the computer was purchased at the end of February, 2014.
All 3 minidumps are available at:
https://onedrive.live.com/redir?RESID=7B6D641161EAE33%211120
This disturbs my work whenever I need to reactivate my license of office until I can get back to where I was.
How can I avoid this problem happen again and still be able to fully use my computer?
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
It is a very common bugcheck. Usually the PIN address of exception
the driver/function that caused the problem. Always note this address
and the date of the picture link / driver that contains this address.
Some common problems are the exception code 0 x 80000003. This means a hard
coded breakpoint or assertion was hit, but this system has been started
/ /NODEBUG. It is not supposed to happen as developers should never have
breakpoints coded hard in retail code, but...
In this case, make sure a debugger must be connected and the
system startup/DEBUG. This will we will see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, unhandled exception code
Arg2: 0000000000000000, the address that the exception occurred at
Arg3: fffff880031a2938, address of Exception report
Arg4: fffff880031a2170, address of the context recordUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
Nom_processus: System
CURRENT_IRQL: 0
Error_code: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The
memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000008
EXCEPTION_PARAMETER2: 0000000000000000
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800d4fd3168
Unable to get nt! MmPoolCodeStart
Unable to get nt! MmPoolCodeEnd
0000000000000000FOLLOWUP_IP:
nvkflt + 37 c 2
fffff880'03e187c2? ???FAILED_INSTRUCTION_ADDRESS:
+ 37 c 2
00000000'00000000? ???STACK_TEXT:
fffff880 '031a2b78 fffff880' 03e187c2: fffffa80'0d67d950 fffff880 '031a2e00 fffffa80' 0d67d95000000000'00230047: 0 x 0
fffff880 '031a2b80 fffffa80' 0d67d950: fffff880 '031a2e00 fffffa80' 0d67d950 00000000'0023004700000000' 00000000: nvkflt + 0x37c2
fffff880 '031a2b88 fffff880' 031a2e00: fffffa80'0d67d950 00000000'00230047 00000000'0000000000000000 00000001': 0xfffffa80'0d67d950
fffff880 '031a2b90 fffffa80' 0d67d950: 00000000'00230047 00000000'00000000 00000000'0000000100000000' 00000000: 0xfffff880'031a2e00
fffff880 '031a2b98 00000000' 00230047: 00000000'00000000 00000000'00000001 00000000'00000000fffff8a0'05c3b700: 0xfffffa80'0d67d950
fffff880 '031a2ba0 00000000' 00000000: 00000000'00000001 00000000'00000000 fffff8a0'05c3b700fffff880'031a2c78: 0 x 230047
nvkflt.sys
Driver Description: Filter driver NVIDIA Graphics
Driver update site: http://www.nvidia.com/Download/index.aspx
Make sure all your display drivers are updated and if this does not work, uninstall and perform a clean installation.
Guide on how to install the NVIDIA Windows 7/Windows Vista display driver (even in windows 8)
Good luck
-
How can I remove updates in the App Store I want?
How can I remove updates in the App Store I want? that is no longer use app, but I'm getting updates listed.
Delete all copies of the application from the main HARD drive and all external drives or mounted partitions which can have the app.
By the end of 2012 mini Mac, OS X El Capitan 10.11.4. Apple Watch, 38 mm silver AL, Watch OS 2.2; iPad 2 Air & iPhone 6 + iOS 9.3
-
Switch 10 - Please wait while we install an update of the system
Hello
Recently, I brought a switch 10. Whenever I turn on the camera, I see the Acer Logo and he said: "Please wait while we install an update of the system.
I must have started the device about 40 times now, but it does every time.
Windows updates are up-to-date and are therefore all updates from Acer.
Any ideas on how to stop this happening?
Thank you
Cory,
Sorry for the previous post - I just noticed, that last Wednesday, you published an update of the BIOS (1,16).
Guys, I'm happy to admit that this update has fixed the problem for me. Although I had hurt a bit (I had to restart Windows in order to restart the upgrade process) and after you apply the fix on the first start, that I was also able to see the spam message, at the next start-up went well.
Thank you for the support, now my switch behaves as expected.
See you soon!
Hubert
-
original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem
my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem
Hi Glennisidore,
Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.
-
Notification of update of the system
How can I get rid of the update of the system of Xperia to Marshmallow in the notification bar without the updat? I use the last version of lolipop and not interested in the update for the moment and do not want to be constantly reminded.
You cannot by default, you can erase data for the software update application, it will remove the notification, you must restart your device.
-
Why my wireless stop working after the last update of the system?
My wifi worked perfectly before the last update of the system. Now, it will not register, but a bar of signal and nothing works. How can I fix it? Makes unnecessary internet on TV, because I have not a wired connection is close.
My TV is a model NSX-46GT1.
-
Causing the system RMAN backups for not responding
Need some help here. I inherited a system in which has about 65 GB memory, Linux 64 - bit - 16 processors. Whenever an RMAN backup is performed, else cannot do anything. The load average is about 10 (max). My theory is that it is the init.ora parameters, but not sure... Here's the deal:
SGA_MAX_SIZE = 47GB
SGA_TARGET = 0
shared_pool_size = 5G
JAVA_POOL_SIZE = 1 G
LARGE_POOL_SIZE = 0
db_cache_size = 38G
I'll look into what I have to change. I just wanted to get other opinions since I inherited a wasp nest and need elements good enough before you can change all the settings. All documents, Metalink, etc that you can provide to support a change in these parameters would be great. Thank you.Hello
You can check http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtunin.htm
You can use the formula to set the size of the pool. If you do not install the largest basin of the rman uses memory of shared pool which can cause the problem of e/s/execution.
LARGE_POOL_SIZE = number_of_allocated_channels * (16 MB + (4 * size_of_tape_buffer))
Hope this will help you.
Thank you
Krishna -
Why my game Center freezes when I go by parameters or directly by clicking on the center of games? Can I know which method is the best to use to solve this problem? Also, I use an iPhone 6 s, iOS 9.3.1
Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the call logo comes back again?
You won't lose data, but it can cure a few glitches.
If this does not work, the initial Setup would be the next step:
Use iTunes to restore your device to factory settings - Support Apple iOS
Maybe you are looking for
-
I tried to format a usb drive on my iMac home for use on a Windows computer. I tried to format it on the iMac with El Capitan and format on the Windows computer, but with the same question. The files are corrupted and do not function correctly on th
-
Wireless does not work on my Satellite U400/03 s
Hi guys,. I have laptop Toshiba Satellite U400/03 and I have a very strange problem that I can't seem to move. I registered new connection ADSL2 + and yesterday, when I tried to configure it upward, I found that the I can connect to the internet by c
-
arithmetic on an analog input channel
I use a NI 9239 card to read four analog inputs. The sample data are interleaved. On my fourth channel, I want to split each sample by 2 and subsequnectly plot these data to a chart of the band. I sought the help of NOR-DAQmx ways across this channel
-
Is anyone else having problems with execution of Java based applications on Windows 7 RC?
tried to play Pogo, said that Java is not installed, so I installed Java and restarted the browser, still no action.
-
How can I change the duration of an MP3 file I downloaded? For example, I have a song that 1.5 last minute, but I want to only keep the 21 seconds. How can I culture there?