Similar Questions

• How can I start the database without using crsctl? ~ Xev

  Hey guys, it's Xev.

  I'm trying to recover cancellation based, and when I try to put the database to mount with sqlplus, it won't let me.

  How to use srvctl to put the database in a mode of editing?

  I stopped the entire stack of crs on both nodes, but I'm not clear on how to assemble the database now to the CCR?

  Thank you

  Xev.

  Xev Bellringer wrote:

  Ho Toby, when I try this command, srvctl start db d db_unique_name o mount

  It gives me the following two errors:

  PRCD-1027 unable to recover the RAC database

  RPRC-1070 has been unable to verify

  I have the GRID_HOME of source and I use root of course srvctl start because it is in srvctl.

  I have crs stack while I do this? If yes how do I start the CRS battery without the database?

  Hi Xev

  On this step, I'm assuming that you have defined cluster_database = false and have stop the CRS.

  Remember: -.

  1 take a full backup still running (assume that you already have).

  2. make cluster_database = false, before starting the recovery.

  3 went parallelmediarestore the RMAN parameter, because it can slow down the recovery process.

  4 restore the db.

  5. you start db.

  6. set cluster_database = true.

  7. stop your db in normal mode, immediate.

  8. start your database by srvctl

  Good luck...

  Concerning

  Jihane Narain Sylca

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

• How to start the database and servers after the installation of the Webcenter JSK Portal

  Hello

  I finally installed the portal WebCenter using JSK, after it turned off the machine, I don't know how to start the database or server, I need to set the environment variables? create the oracletab file? or is it a file .sh to start the database and servers?

  Any help will be great!

  Best regards!

  Thanks Françoise-Oracle for your response

  As you say, I need to go to /WCPortal_JSK_Linux.x 86-64/linux64, I found all the scripts that I needed to start or stop a server or database. But more especially if you run evertything, (I did) you just need to run the de./startup.sh script and wait, he'll run, but take some time.

  Best regards!

• How can I make Thunderbird start car with windows startup

  How can I make Thunderbird start car with windows startup

  You can by placing a shortcut in the startup folder of windows, just like any other windows program.

  However if you do, you are likely to encounter problems such as downloading email while still load the antivirus and the network is busy, announcing the arrival of machines on the network (which can be a network a) and any other program of a dozen are loading is heavy risk of timeouts and disconnections of the server as well as error messages that make little sense because they are something that still load.

  The bottom line is so safe that you can, but if there are any questions bring her out of there first.

• Problem of temporary file in the database takes a while to start the database

  Legends of dear,

  I am facing the warning next or problem with R12.0.6 64 bit and 10.2.0.3 databases in a linux environment

  Mar 20 18:24:23 Oct 2015

  *********************************************************************

  ATTENTION: The following temporary tablespaces do not contain any file.

  This condition can occur when a backup controlfile

  been restored.  It may be necessary to add files to these

  storage spaces.  This can be done using the SQL statement:

  ALTER TABLESPACE < nom_tablespace > ADD TEMPFILE

  Furthermore, if these temporary tablespaces are no longer

  necessary, then they can be recessed.

  Temporary tablespace is empty: TEMP3

  *********************************************************************

  When I questioned my database_properties

  Select * from database_properties where name like '% TEMP % ";

  

  Journal Alerts

  Mar 20 18:24:23 Oct 2015

  Completed: ALTER DATABASE OPEN

  Mar 20 18:24:25 Oct 2015

  Additional checkpoint up to RBA to RBA [0x68e.5c2b5.0] [0x68e.5c26c.0], current journal line

  Details of the Temp file

  /Oracle/prod/DB/apps_st/data/temp03.dbf	1	TMP4
  /Oracle/prod/DB/apps_st/data/temp04.dbf	2	TMP4

  Because of the warning above when I give 'start-up' in "sqlplus" or start the database using the addbctl.sh script there is a huge gap between the following

  SQL > startup;

  ORACLE instance started.

  Total System Global Area 2147483648 bytes

  Bytes of size 2074112 fixed

  872417792 variable size bytes

  1258291200 of database buffers bytes

  Redo buffers 14700544 bytes

  Mounted database.

  ..............

  ................

  ..............

  .............

  ...........

  .......... (LOCAL TIME - 10 to 15 minutes)

  ...............

  ...............

  .................

  ........

  Open database.

  Please suggest how to deal with this.

  Thank you

  Knockaert

  Hello

  It is a question of pure database. Not much relationship to the EBS.

  Anyway, as stated in the warning, you must add a temporary file in the tablespace TEMP3 or drop the tablespace if you do not need.

  Can you post the full alerts log part, which takes 10 to 15 minutes?

  Kind regards

  Bashar

• I would like to know how I can make firefox stop the message that I have to restart my browser to complete the update without having to reboot?

  I would like to know how I can make firefox stop the message that I have to restart my browser to complete the update? I'll restart later, but does not wish to do so immediately. I can
  Click on the cross, but after a few minutes the message is back and I can't figure out how to stop
  It's popping every few minutes.

  You need to restart it.

• How can I make Pages capitalize the first word in a sentence?

  How can I make Pages capitalize the first word in a sentence? The I phone t - it, the iPad does, why not not iMac using Pages capitalize the first word on a new sentence?

  Pages of IOS and IOS itself remain different implementations of Pages v5.6.1 for Mac and OS X. In any version of Pages v5, if there was an option to preferences in Pages ' 09, there is no auto-capitalisation function.

  See my previous post is launching an OS X App Store free application, which can be applied to auto-capitalisation to your Pages v5 documents.

• I have to stop and start the database after the data cache value increases?

  Hello!

  rule of Calc is in error and indicating that the error can be caused by data cache setting small size?

  I increased the value, but it still gives the same error message. I can't stop and start the database, just clicked on apply.

  I need also to check the journal rule and computation of the application to determine the cause of the error.

  But the key is in the question in the header...

  Kind regards

  user637777

  
  

  Yes, you do.

• Why I can't update my credit card payment information? It shows the error in the server. How can I make contact with the staff of Adobe?

  Why I can't update my credit card payment information? It shows the error in the server. How can I make contact with the staff of Adobe?

  Hi Purple % 20Lambs,

  Please contact Adobe support:Contact customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  In case you can't reach Adobe support, please see:

  Contact the technical support FAQ: Impossible to reach support via the link "contact us".

• Cannot start the database after reducing the size of the RAM

  Hi all

  I have a database of GR 11, 2 installed in virtual box VM. Initially, I got 3 GB of RAM for this machine (when the database has been installed).

  I then reduced it to 1 GB. Then I tried to start the database, but I got error below.

  MEMORY_TARGET not supported on this system

  
  

  Help, please.

  
  

  Thank you

  Mauricette.
  

  User618902-OC says:

  Is it not possible to reduce the size of the RAM and start the database with configuration on MEMORY_TARGET changes?

  What part of "MEMORY_TARGET not supported on this system" do you NOT understand?

• How can I restore and recover the database to a different server using RMAN?

  Hello Friend:
  
  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.
  
  That's the two servers. different stored different on each server and a single link, a table library where backup set.
  
  I can only restore and recover the database of the Rman command. Could you give me a demo?
  
  Thank you

  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

  That's the two servers. different stored different on each server and a single link, a table library where backup set.

  I can only restore and recover the database of the Rman command. Could you give me a demo?

  Check this box
  * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

• DBSTART start the database but the instance is not started...

  Hello
  
  I use dbstart and it works fine (version is 10g R2)
  
  I run the command dbstart and it starts the database, even I added two lines to select the version name and databsae. everything is ok. But when he finished, I connect to sqlplus and run
  

  sqlplus "/ as sysdba"

  It gives me "connection to an instance inactive."
  I check ORACLE_SID and ORACLE_HOME, everything is ok. I checkd the processes using the ps - to the | grep db_name and it shows the current Oracle process
  
  What is the reason?
  
  Thank you

  /Home/opt/Oracle/product/10.2/Db_1/

  Remove the slash and try again

  export ORACLE_HOME=/home/opt/oracle/product/10.2/db_1
  sqlplus / as sysdba

• How to start the database services according to eBS 12.1.1 fix already in place

  Migration db eBS 11.5.10.2 9.2.0.6 to new server eBS 12.1.1 db 11.1.0.6.

  Chosen path: db 9.2 improved and migrated to db 11.1 using exp/imp on new server

  After eBS 12.1.1 predict file system db existing 11.1 how to bind db level of applications and to start the Server service.

  AutoConfig completed successfully.

  Can you connect to the database remotely after running AutoConfig from the database and the database listener and successfully? If so, run your script and see if it works.

  Thank you

  Hussein

• How to start the database aautomatically

  Hello
  
  Oracle Version: 10.2.0.1(standard edition)
  OS: FEDORA 7
  
  Can someone help me please on how to start the base database automatically when the server is in place.

  http://www.Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php

  Good, nice and clear link to auto-start the PB on linux.

  HTH
  Girish Sharma