How do I print Postscript under Windows 7 file?

Similar Questions

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I print a copy of the files in a folder - not each file - just the list

  original title: list of print files

  How can I print a copy of the files in a folder - not each file - just the list? List of cases of printing

  How can I print a copy of the files in a folder - not each file - just the list?

  Karen's directory printer (free)

• How to install printer drivers in Windows 7

  I just got my CM1312 MFP works in Windows 7.  Here's how:

  1. Insert the disk into your CD/DVD drive.  Choose to display the files in the Explorer.  Scroll down the "Setup" file, which is identified as an application.
  2. Right click on the file and select "Properties". Click the 'Compatibility' tab at the top of the window that appears.
  3. Check ' run this program in compatibility mode for: "and select"Windows Vista"in the context menu.
  4. ALSO check "Run this program as Administrator" at the bottom of the window.
  5. Press 'Apply', then 'OK '.
  You can now double-click the "Setup" file and run the software installation program.

  Bob,

  The printer would not automatically install for me, understandable with a beta os.  The HP install disk refused to run on a system not recognized, so I had to run the installer in compatibility mode.

  For interested people, Windows 7 works great for me on a system of 3 years (Pentium D with 1 GB ram.  I'm even using the x 64 version.

  Scott

• How do I "Print screen" on Windows XP sp3? Where is the 'Print Screen' button?

  • THR INSTRUCTIONS I POSTED BELOW WOULD BE GREAT IF THERE WAS INDEED A 'PRINT SCREEN' KEY ON MY LAPTOP HP QUESTION STANDARD KEYBOARD. IT DOES NOT EXIST. PLEASSE HELP. Thank you.
     
     
    How to print the form from the help topics online HP Windows XP:
     
    Choose a task
  • Take a picture of what is on your screen
     
    Presentations, Articles and tutorials
  • Choose and configure a port
  • Graphics
  • Mode

  To copy the window or screen contents

  • To make a copy of the active window, press ALT + PRINT SCREEN.
  • To copy the entire screen as it appears on your screen, press print.
  • To paste the image into a document, click the Edit menu in the document window, and then click Paste.

  Hi JWDub,

  If you do not see print screen button on your keyboard then I suggest to use the on-screen keyboard and check to see if it helps:

  Activate and use the on-screen keyboard

  I hope this helps.

• How to read contact information under Windows XP?

  I want to develop a LabVIEW application that will show the coordinates of the contact, in Windows XP.

  For example, the screen is 1920 x 1200 and the touch screen is an integral part of the screen. When I move my finger across the screen, I should be able to connect the coordinates, for example. If I put my finger on the top left corner of the screen, LabVIEW vi must connect (0, 0) and (1920, 1200) if I touch the bottom right. And of course things get a little complicated when it comes to specify the sampling time.

  How in LabVIEW?

  Try this

• How to change the partition under windows xp and corefoundation.dll

  I have a lot of memory on my computer, but not much on my c drive. How can I change? And how do I find corefoundation.dll car for free?

  Hi Claudia1994,

  I suggest you reinstall the latest version of iTunes and QuickTime, check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  http://support.Apple.com/kb/ht1925

  For additional support post your query in the community forums of Apple.

  https://discussions.Apple.com/index.jspa

• How to use Japanese language under Windows XP?

  Original title: Activation of Japanese language.

  I have windows XP home edition with Office 2007 standard.  I would like to write & read the Japanese text. How to enable Japanese language. I had before, but it has lost recently.

  Hi BillyTakemoto,

  You can try to download and install the Japanese language from this link manually interface software.

  http://www.Microsoft.com/unlimitedpotential/programs/LLP.mspx

  Reference: How to add and enable additional in Windows languages

  If you want to enter Japanese text in the Microsoft Office application, you can download & install the update from this link.

  Office XP Tool: Global IME (Japanese)

  Hope the helps of information.
  Please post back and we do know.

• How to change update settings under Windows vista.

  OT: I have a PC that has been previously connected to a corporate network, now, I'm at home on broadband. Please tell me where to change update window.

  have a PC that was previously connected to a corporate network, now I'm at home on broadband. Please tell me where to change window update

  Hello

  Here's how to change the update settings:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  See you soon.

• Printer network under Windows 8.1

  My works Photosmart 4280 old fine with wondows 8.1 through the forum, but having managed to do work with windows 8.1 my other two computers running windows 7 and are wireless will not contact the Photosmart windows 8.1 computer connected by usb. I have the tested network and file sharing, and type of work. I had the controls themselves, made for sharing the printer on all computers. The printer worked fine on the network until I installed windows 8.1. Any help would be appreciated... Thank you.

  Generally, your client machine must use a driver that is compatible with the host computer. Because your host is windows 8.1, your drivers are for windows 8.1, so the previous drivers signal may be different and will not work. Network printing is horrible and has always been. What you can try, deletes the printer completely from your windows machines drivers 7, and there is a configuration of sharing on your machine 8.1, which allows you to specify that drivers can be used, so that you can use older drivers on machines that cannot use the new printer. Once it is setup, you should be able to connect to the printer and windows 7 will get the drivers that are defined in your printer sharing - and then it should work.

  It's very high level and I him did not for a few years as all my printers are wireless now, but I hope this helps.

• How to install the mail under Windows 7 client

  How can I find a guide step by step to install the mail on Windows 7 client

  How you do this will vary according to the client and who is your email provider that you want to use.  Normally, the instructions will be found in the section using your e-mail provider.  Here are two examples:

  Gmail and Windows mail IMAP: http://support.google.com/mail/bin/answer.py?hl=en&answer=77696

  Comcast mail and Windows Mail client: http://customer.comcast.com/help-and-support/internet/using-windows-mail/

  If you know who your provider of e-mail and that customer that you want to use, someone may be able to provide more specific assistance.

• How to change the font under windows icon size 8

  We have Windows 8 Pro and would like to change the font size under the icons for a larger size. In Windows XP and Vista, this been done easily by selecting the look and colors of Windows and selecting icons.

  We would like to see an easy solution to this problem.

  James

  This changes the ICON and the text of the same size, I want to change ONLY THE TEXT under the ICON not both. I need to enlarge the text under the icon, I don't want to enlarge the icon.  You have been able to do under XP and Vista.

  James

  Hi James

  I tried this on several different systems of Windows 8, and it seems to work fine.

  Here are a few screenshots.

  W8_Desktop_Text size 10:

  http://i196.Photobucket.com/albums/aa86/rvmv/image4.PNG

  W8_Desktop_Text size 16:

  http://i196.Photobucket.com/albums/aa86/rvmv/image3.PNG

  I don't know why it would not work for you?

  Concerning

• How to make links available under Windows, Images.

  Windows 7 Professional and PSE-11

  Under the Windows images, only the first tile link is active. This means I can have only a layout open at the same time. Four of this section are grayed out. I need to use the last one, consolidate all to tabs.

  I've recreated the preferences and also a system restore to an earlier date without success. I'm working on a paper and presentation of digital scrapping class. I need help desperately.

  Thank you for your help.

  First of all go in Edition > Preferences > General and turn on allow floating documents.

• How to backup on DVD under Windows Vista?

  I have windows vista... Last year this time, I made a back up on 3 DVD... This week I'm redo it... I erased all the DVD... and made a return to the top... but it isn't on a single dvd... I missed something... and that was clear an error? Thank you for the answers

  Hi thanks for the info... I went back and started a full backup (dvd) disc 1 well... Disc 2. a HR in and almost done, I came back to comp and it says error code access denied... !! What is the devil. ?

  Thanks for all info

  I don't have a solution to your problem of file using DVD backup.

  I just want to make a suggestion...

  Abandon the DVD method. It's stone age, and several times he does not. I know, I have here.

  Please, invest in an external hard drive and backup with it.

  It will secure you all the aggravation of the use of DVDs.

  You won't have to sit by the computer, feeding beside with dvd, whenever he asked one.

  You can simply walk, watch TV, read a book, etc. and let the computer and the ext.hhd are doing their job.

  According to the country of whichn you are, an ext.hard of 1 TB drive can be had for less than $150 in the United States and the Canada.

• How patch oracle dataguard database under windows

  Hi friends,

  I need to update a database of Oracle 11 g Dataguard on Windows 8 Pro x 64 with the latest Patch critical update available for this configuration. I read that there is a CPU 20833831 (July 2015).

  What documents Oracle I pay to play? or what are the steps I need to follow? Or what is the best way to accomplish this task?

  Details of PRIMARY database:

  SQL > select * from v version $;

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11g Release 11.2.0.4.0 - Production personnel

  PL/SQL Release 11.2.0.4.0 - Production

  CORE Production 11.2.0.4.0

  AMT for 32-bit Windows: Version 11.2.0.4.0 - Production

  NLSRTL Version 11.2.0.4.0 - Production

  SQL > SELECT * FROM history of registry of $;

  ACTION_TIME ACTION NAMESPACE VERSION ID COMMENTS BUNDLE_SERIES

  ---------------------------- ------------------------- ------------ ---------- ---------- ----------------------------------- -----

  08/07/14 21:59:26, 422000 APPLY SERVER 11.2.0.4 WinBundle 4 11.2.0.4.4 PSU

  SQL >

  C:\app\product\11.2.0\dbhome_1\OPatch > lsinventory opatch

  Installer of temporal parchment of Oracle versi¾n 11.2.0.3.6

  Copyright (c) 2013, Oracle Corporation. All rights reserved.

  Oracle home: C:\app\product\112~1.0\dbhome_1

  The central inventory: C:\Program Files (x 86) \Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.3.6

  YES version: 11.2.0.4.0

  Location of the log file: C:\app\product\112~1.0\dbhome_1\cfgtoollogs\opatch\opatch2015-09-06_19-54-29PM_1.log

  Location of the output file Lsinventory: C:\app\product\112~1.0\dbhome_1\cfgtoollogs\opatch\lsinv\lsinventory2015-09-06_19-54-29PM

  --------------------------------------------------------------------------------

  Nivel superior instalados products (1):

  Oracle Database 11g 11.2.0.4.0

  Hay 1 productos instalados in este directory Rayz of Oracle.

  Sears temporal (1):

  Patch 18296644: applied on Thu Aug 07 18:48:26 COT 2014

  Patch ID: 17560341

  Patch description: "WINDOWS DB BUNDLE . 11.2 PATCH " . 0.4.4: (18296644)"

  Created April 22, 2014, 02:01:38 hours

  Bugs fixed:

  16809786, 17716305, 16180763, 17545847, 17597748, 16992075, 17610798

  18235390, 17446237, 16450169, 16731148, 17761775, 14602788, 17726838

  17441661, 17050888, 17622427, 17546761, 13866822, 16315398, 17215306

  17040764, 14010183, 16837842, 16228604, 17346671, 18084625, 16683112

  14133975, 17721717, 17602269, 16777840, 17577218, 17071721, 16929165

  18241194, 17080436, 17265217, 17036973, 16698971, 4189542, 14852021

  16399083, 13609098, 17493764, 16785708, 17987366, 16187992, 17781991

  17313525, 16833527, 16618694, 17741995, 11733603, 14285317, 17341326

  16491477, 17357979, 17344412, 17088068, 17332800, 13498243, 16850630

  17783588, 14580303, 16296213, 18223971, 17393683, 18069285, 16863422

  16069901, 17443671, 17897511, 18296644, 17389192, 17394950, 10136473

  17785632, 14458214, 18069723, 17397545, 17186905, 17325413, 13364795

  16472716, 17468141, 13944971, 17883081, 16721594, 13853126, 18088509

  17205719, 16849620, 17284817, 17239687, 17079301, 18180390, 16976121

  17235750, 17951124, 17564992, 17754782, 17082359, 16314254, 17478145

  18154779, 18160822, 16613964, 17174582, 16043574, 17865671, 16943711

  18232462, 17612828, 17375354, 17393915, 17571306, 16825679, 18230522

  17546973, 17209410, 16633319, 16956380, 13077335, 16470836, 18328509

  12905058, 17921190, 17799716, 17614227, 18094246, 18018515, 18034871

  17672719, 16912439, 17385178, 16394467, 16220077, 17016369, 18115594

  17501491, 17027426, 17591148, 16875449, 17465741, 17752121, 17892268

  17614134, 14829250, 17288409, 17296856, 16285691, 17390431, 14338435, 17323222

  --------------------------------------------------------------------------------

  OPatch succeeded.

  Best regards

  dbape.

  What documents Oracle I pay to play? or what are the steps I need to follow? Or what is the best way to accomplish this task?

  1 doc oracle suggest to talk about the 'Readme file' patch... remember this is a basic step that you do.

  2. go to read me and follow the steps of which has suggested correction doc. Nobody does something special on the benches.

  -KumarN pavan