How do I restart services (NAT) vmnet with reboot 'everything '.

Similar Questions

• How do I restart the service manually DCRServer in LMS 4.2.3

  The DCRServer service is waiting to initialize.

  I stoped Daemon Manager and rebooted with no success! Even restart the server did not help!

  How can I restart manually?

  It is a virtual appliance...

  Hello Marco,

  Marvin note is correct, usually when DCRServer shows such State, the files may be damaged are:

  /opt/CSCOpx/MDC/Tomcat/lib/ctm_config.txt

  /opt/CSCOpx/MDC/Tomcat/shared/lib/ctm_config.txt

  /opt/CSCOpx/MDC/tomcat/webapps/CWHP/Web-INF/lib/ctm_config.txt

  If you have time, download the 3 files to check and verify that they are not damaged.

  Also, make sure that the host name has not been changed, LMS should be grateful, therefore, you can run the following script:

  / opt/CSCOpx/bin/perl /opt/CSCOpx/bin/resolver.pl

  and

  / opt/CSCOpx/bin/perl /opt/CSCOpx/bin/resolver.pl

  It will be useful,

  Ernesto Q,.

• How can I restart firefox with the same tabs and windows?

  How can I restart firefox with the same tabs and windows?

  It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

  I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

  Thank you. -David

  I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

  With this set, you can restart Firefox manually out using the menu-

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  -and then restart Firefox.

  If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

• I tried to turn on windows defender and he said that there is an error. It will not turn back. Anyone with information would be a great help. How to start the service manually?

  I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __

  Hello
   
   
  could a. you give us the exact error that you are experiencing?
  (b) also mention the error code, as well if it is listed.
  have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
   
  
  Let us check if the service is set to automatic.
  1. Click Start-> run and type services.msc
  2. now, locate the service named Windows Defender,
  3. double click to bring up the Properties window.
  4. set the startup type to automatic
  5. click on apply, and then click Start
  6. click OK, and then click Close window Services/Local
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I send a PDF (contract) with electronic signature fields to a client which sends the document to its legal service for execution?

  How can I send a PDF (contract) with electronic signature fields to a client which sends the document to its legal service for execution? The last time that I sent him one he simply passed on to its legal group but it infiltrates automated email (text pending signature) even after its Legal Department has run.

  Hey bje59649739,

  Please check that no signature field is empty in the document to be signed.

  You can send the document yet keep identification of the signer's email (under: label) for the Legal Department to get the completely signed document.

  Let me know if this helps.

  Kind regards

  Ana Maria

• How to integrate the Service Note with space webservice?

  Hello
  
  Can anyone please guide me how to integrate * "Rating Service" * with webcenter spaces. I need to implement "Personal Note" in my space webcenter application. Please can someone give me the article showing the procedure step by step the service note implemennt with webcenter spaces or a few examples of the sample.
  
  Concerning
  REDA

  Go to the Webcenter spaces-> administration-> resources-> make a copy of the catalogue of resources-> change the copy->, click Add symbol-> add library-> taskflows select tab

  Here you see the list of takflows that you can add to the catalogue of resources.
  Here you can choose the lists of links, notes, service etc...

  Hope that clears it :-)

• The trial period with Apple music, now charge them me; How to cancel this service?

  Aiinstalle trial 'Music from Apple' now they are charging me, how to cancel this service?

  Disable the automatic renewal.  View, change or cancel your subscription - Apple Support

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Spooler subsystem app stopped working, was closed due to the DEP. How can I restart it.

  How can I restart Spooler subsystem. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you mean the Spooler Service, go to start / Control Panel / Administrative Tools / Services and scroll to spooler and make sure that it is set to automatic (put it in auto mode if it is not) and make sure that it is started.  If it is running, stop it and then restart it again.  If it is stopped, start it just.

  If you speak another application, to be more specific and provide the name and version of the application as well as the EXACT text message you received (including all codes).  Here is an article on how to enable or disable DEP using programs that can help: http://www.vistax64.com/tutorials/65790-dep-turn-off-programs.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to start Oracle service automatically?

  Hello
  
  I use Linux server with Oracle10g. Often my server is restarted, in this scenario, I want to restart all the databases andllistener. Please inform me how automatically start Services/instances Oracle while rebooting the server?
  
  
  Thank you
  Goussard

  You must create the new service which will start and stop databases and listeners when the server is restarted.
  Linux new services are created under /etc/init.d - and then it should start/stop script for oracle having created new service must be added and run levels are configured.

  You can start by reading this link:
  http://www.Linux.com/articles/46892

  In order to understand the overall process.

• How do I configure the BlueTooth PAN with Iphone 4 profile?

  Hey.

  I try to configure PAN on my phone I 4 s.
  PAM Apple I Phone taken Bluetooth profiles supported
  Using stacked by Toshiba V8.00.12 with bluetooth Toshiba USB micro adapter bluetooth.

  The Toshiba product manual tells you, if the Bluetooth device supports several functions to run the checkbox custom during the new device synchronization.

  So that you can choose the function you want to use.
  That's what you do if the manufacturing have set one as the default service and you want to use other services supported!

  Hello

  Found a few nice HowTo on Toshiba BT doc:
  + How do I connect to the internet with the mobile phone via DUN and to share it with the PAN.
  http://APS2.toshiba-tro.de/KB0/HTD9602MO0000R01.htm

  Could be useful...

• How to enable web services and search for printer email address

  I am trying to sign up for the monthly INK from HP.  As part of the application, they ask me a CODE.  However, I can't CODE because I am advised that my Web services are not enabled.  How to enable Web services so that I can complete my application?  Thanks for any help you can offer me.

  Hello

  What model of printer you have?

  Assuming your eprint-enabled printer, please follow the steps below to connect to web services and get your email from the printer.

  To find printers e-mail you need to enable web services from the front panel of the printer. It is normally a button on the front panel or an option in a menu.

  The printer will be connected to your WiFI network, and once the device is activated, it should display a page with a code composed of letters and numbers. It is the e-mail address of printers (when you add a @hpeprint.com to it).

  Once you have this, go ahead and configure a connected HP account and register the printer to your account. This will allow you to manage settings of the ePrint printer but also to track the history of the work.

• I have a popup that says that I have a virus he locked a tab in safari. How can I restart safari without open tabs

  I have a popup that says that I have a virus he locked a tab in safari. I suspect the popup is a phishing attempt, and I didn't click on the OK button. I closed Safari, but whenever I have restart Safari he wants to open the tab with the context menu. How can I restart safari without open tabs? I now tried the SHIFT key while restarting.

  I'm runnning OX 10.8 and Safari 6.x.x

  Thank you

  Blake

  

  Blake,

  Read: Phony 'technical support' / 'ransomware' popups and web pages for a solution.

  

• How can I sign in to Skype with my new tablet...?

  How to reach customer Service... This is a SITE IMPOSIBLE >?

  Brian.

  Hello

  Skype customer service can only be reached via the link that I gave above. Please also note that, the Skype community, is not a branch of the customer service, so we are not able to request that they contact you. In addition, no Skype customer service not will contact you by email in the way which ask you.

  It may be better to try to access support text Chat using a desktop computer, if possible. It can help to solve some problems by temporarily allowing popups on your browser and also turn off (again temporarily) and extension/addons you use, that blocks pop-up windows. The reason is that the chat opens in a pop-up window. If it is blocked, you will not be able to start communicating with them.

  In some cases, it can help you to access Skype service customer using Internet Explorer, even if it's not your usual browser.

  Hope that helps.

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >