How do I switch parameter (Instrument addr) model of batch test

Similar Questions

• NEITHER Instrument Simulator model No.: 183913C-01

  Hello, I just finished the LabVIEW Core1 online training, that came with the purchase of LabVIEW 2014. I am VERY new in the world of NEITHER. I bought a Simulator Instrument OR model No. 183913C-01 Rev: 1. I am trying to establish communication with this Simulator and not having much luck. I connect the Simulator to my laptop via RS232 to USB Keyspan peripheral, because my laptop is not a serial connection port. It shows to be on Com4. I think I put the dip-switches correctly. I switch 8 G Mode value and GPIB address the value 2 (switch 2 is activated, all the others are off). I searched online for a demonstration, but nothing have mounted. I found a few messages Simulator here but they were not the model I have. I don't know if I should use GPIB or serial connection for this thing. Any help would be greatly appreciated.

  
  

• How do you change your bc intial model selection under options the site after clicking on finish

  How do you change your bc intial model selection under options the site after clicking on finish

  You can't do that. BC is not a system of theming like Wordpress or Joomla. The model is fixed and models of switching at this stage is not an easy feat.

• How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it

  How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it

  Kareems, how are you trying to install? Live? Or from iTunes. You can connect your phone to your computer and launch iTunes and have iTunes download and update the phone.

• Just updated Firefox to update with new rounded tabs... How can I switch to old square tabs?

  Just updated Firefox to update with new rounded tabs... How can I switch to old square tabs?

  Many of us use
  
  Restorer Classic theme (Customize Australis)
  
  Restore the tabs squared, appmenu, modules, small display bar icons and more on Australis UI (Windows/MacOSX/Linux + Fx 29 +).

• How to disable "switch to tab".

  How to disable "switch to tab"?

  This 'feature' is unnecessary and a bit boring.

  https://addons.Mozilla.org/firefox/addon/switch-to-tab-no-more/

  https://addons.Mozilla.org/firefox/addon/switch-to-tab-blacklist/

• When I create a new tab and enter the URL for a site already called on another tab, instead of download the new site in the new tab Firefox switches to the tab with the site already called up. How to disable "switch to tab"?

  How to disable "switch to tab"? Why? The site that I want to turn a Java program, and I want the program to run several times. I looked in tools > Options > tabs and found no way to disable the switch 'tabs '. I looked through the Options together and found nothing. I thought tools > Options > advanced could hold the key to a solution, but I found nada.

  You can turn it off by using the switch to tab no Add on more - https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/

• I don't like the new look of Skype, how do I switch back to the old Skype?

  How can I switch to the old stype? New stype sucks!

  This message was transferred from its previous location to create his own new topic here; his subject and/or the title has been changed to differentiate the position of other requests for information and to reflect the content of the post. A link to this message appears when the post was initially added.

  Uninstall the currently installed version of 6.22 and install the 6.21.0.104 previous version:

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• How can I switch phones with a member of the family without losing the data on a phone?

  How can I switch phones with a member of the family without losing the data on a phone?

  jkatts wrote:

  How can I switch phones with a member of the family without losing the data on a phone?

  Make a backup of each phone to iTunes or iCloud (do not forget to use your Apple ID or personal computer), then do whatever your carrier wants do you to change numbers if that's your intention, then restore these backups on the device of the "other."

• How to connect a MIDI instrument to Satellite L300

  Can someone tell me how to connect a MIDI instrument to a L300 laptop.

  Thank you

  First check if this connection is possible.
  Check the ports/jack in the MIDI instrument and ports/jacks on the Satellite L300.

  If the necessary ports are not available on the L300 then you need to buy external devices that provide these ports or you won't be able to connect such MIDI instrument.

• How does the LoadModelPluginAddons parameter in the callback of ModelOptions?

  I ask this question because I'm running a scenario in 2012 TestStand where I want to start a file of sequence, using the entry point of execution 'UUT of Test' that begins then another file of sequence, using the entry point of execution 'Single Pass '. The first file in the sequence using the parallel model and the second uses the model of batch processing.

  For the first file in the sequence, I want to run an add-on plugin model, but I don't want to not run or even charge for the second file in the sequence. So, in the second sequence, I made a substitution of the ModelOptions model call sequence and create a step that just sets the parameter LoadModelPluginAddons = False. But it doesn't seem to work as I expected because the model sequence file add-on is still loaded and executed for the second sequence.

  Can someone tell me what is happening?

  Cordially Jens Christian Andersen

  There is also a ModelPluginConfigurationToLoad parameter, which defaults to "".   ' ' is a wildcard which means load the 'active' configuration of each configuration file. You can also specify a configuration name explicitly, for example "".

  You change the file created automatically, Addons.cfg, contains only a single configuration and it is called '. Therefore the will only be charged if your configuration is "" or "". LoadAddonOns settings is a way to force configuration of the addon to load even if you specify another name of configuration.

  So, is not exactly for what you're trying to do, but if you specify a specific configuration name, it will allow your goal.

• How can I switch between my two email addresses?

  I had an e-mail address which became much too much spam, so I switched to a new e-mail address.  How can I switch to my original e-mail that all my friends and family are used to it?

  Hi Raymond,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Let us work as a team and try to solve this problem.

  If I understand correctly, you want to return to the old e-mail address.

  Please answer these questions:

  1. using a webmail or an email client?

  2. do you use the Internet Explorer browser to access e-mail? If so, which version?

  You can contact the service provider of e-mail (Gmail, Yahoo mail) for further assistance.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• How can I switch to another profile of e-mail in Windows Mail?

  original title: How do I MOVE to a different MESSAGING PROFILE in WINDOWS MAIL?

  I use Windows Mail in Windows Vista Home Premium operating system. I have two email accounts created and added in my Windows Mail program and I would like to ask for help as to how I can get to my default account not to check my emails and on how I can switch from one account to another. Your help is greatly appreciated for that matter.

  Thank you

  Tools | Accounts |  (default) Email account | Properties | In general. Check the 'include this account... '. ».

  Set the "switching." They are both in an identity so the only thing to change is when you create a new message, use the drop-down menu to the right of the From field to determine which account you are sending from.

  If you receive messages from both accounts in the same Inbox, you can use message rules to hijack one of them for a user created folder.

  First, create a local folder to be used as a second Inbox and name it anything you want.  Use it to one of the accounts, as well as the default Inbox for the other.

  Then create a message rule.

  Where the message comes from the specified account.
  Move it to the specified folder & stop processing more rules.
  Click: specified account and enter the account name for the second Inbox.
  Click: specified folder and select the folder that you created.
  Name the rule.

  Move the rule to the top of the list of rules, and incoming messages will be separated into their respective folders.

  And if you used OE and had several identities, this feature was not included in WinMail, but you may be interested by this.

  WMIDs
  http://www.oehelp.com/WMIDs/default.aspx

• How can I switch to type Korean characters on my laptop keyboard? I tried to add 'Korean' in regions and the language, but not sure he did right b/c still do not work when I hit ALT + SHIFT

  I tried to add 'Korean' in the region and language-> keyboards and languages-> clicked on "change keyboard"-> "Général" tab - > added "Korean", but still do not work when I hit ALT + SHIFT.    what I'm doing wrong or what I need to download special software to enter Korean characters if necessary?

  Install windows updates.

  See also: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/how-can-i-switch-to-typing-korean-characters-on-my/8aa8fe1c-e25a-e011-8dfc-68b599b31bf5

• Firewall: How can I SWITCH OFF THE FIREWALL on the PC

  How can I SWITCH OFF THE FIREWALL on the PC

  http://Windows.Microsoft.com/en-AU/Windows-Vista/turn-Windows-Firewall-on-or-off

  Enable or disable Windows Firewall

  If your computer is connected to a network, network policy settings may prevent you from completing these steps.

  View all

  To turn on Windows Firewall

  1. Open Windows Firewall by clicking on the button start, clicking Control Panel, clicking Security, and then clickingWindows firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended), and then click OK.

  If you want the firewall to block everything, including the programs selected on theExceptions tab, select the block all incoming connections checkbox.

  To disable Windows Firewall

  You should not turn off Windows Firewall unless you have another firewall is enabled. Turning firewall offWindows can make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  1. Open Windows Firewall by clicking on the button start, clicking Control Panel, clicking Security, and then clickingWindows firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (not recommended), and then click OK.

  See you soon.

  Mick Murphy - Microsoft partner