How do you create a pulse train finished using a FP-CTR-502?

Recently, I replaced my FP-PG-522 module with a module FP-CTR-502, to achieve higher output frequencies (FP-PG-522 freq to maximum output is 5 kHz, while the FP-CTR-502 output max freq is 16 kHz).

I need to be able to generate a pulse train finished. Has anyone created a pulse train finished using a FP-CTR-502 module front? I started to study the issue, but my ideas so far have been complicated (compared to doing it in a PG module).

Advice on this would be much appreciated.

I can answer this question myself!

The answer is in the * OLD * version (July 2000) the operator of the manual for the FP-CTR-502. For some reason, it has been removed from the version the most recent (June 2003).

See page 11 of this link for more information:
http://www.NI.com/PDF/manuals/322660a.PDF

Tags: NI Hardware

Similar Questions

  • How do you create a video thumbnail which becomes bigger if clicked?

    I have video thumbnails added on my site for youtube and facebook. Thumbnails are small if clicked. How do you create a video thumbnail which becomes bigger if clicked? Thank you, Kelsi

    Try to use a Widget for Composition.

    Add your thumbnail image in the relaxation area.

    Add your Youtube video link to the part of Lightbox.

    You may need to test your browser page, then resize the jQuery framework to your liking.

    If you want your video to show on the top of your page, try the blank publication Widget.

    If you want to fade the page behind your YouTube video box then try the Widget of Composition of LightBox.

    See how a Youtube video here

  • How do you create bookmarks with Designer ES3?

    Based on this link

    http://blogs.Adobe.com/LiveCycle/2012/03/whats-new-in-LiveCycle-ES3.html

    It is now possible to add bookmarks through LC for XFA forms.  How do you go thru Designer? or is not feasible through output?  This is very critical for us because of the WCAG 2.0 compliance.

    I found this specific blog for ES2 +.

    http://blogs.Adobe.com/foxes/2011/04/11/creating-bookmark-in-XFA-forms/

    where its been possible with the addition of the macro.  However other readings of the designer of macros and indicate that the things about blogging is not necessarily officially supported.

    John brinkman in link: http://blogs.adobe.com/formfeed/2010/01/designer_es2_macros.html

    By John Brinkman - 19:38 on January 25, 2010

    Ennis: Unfortunately, even if I knew the answer to the question whether the macros will be officially supported - I could not answer. Our policy for blogs is quite clear that we cannot give specific information about the future of the product. But I encourage you to make your request by whatever channels you have. In the version of prototype, I'm not aware of any restriction on the http requests made by the flash plugin. that is, it is not wired like where flash http requests go through the stack of flash in Acrobat Reader network. As far as I know, the designer does not have the equivalent of a network stack. John

    To return to my question.  How do you create bookmarks for xfa forms in ES3 Designer?

    I created bookmarks by modifying the xml source of the xfa documents. I have created bookmarks for subforms intensively using this method

    the following code snippet

    Eligibility

    0,0,0

    normal

    gotoPage

    In the above example, I a void form called "Eligibility" and have created a bookmark using the tag options

    Let me know if you have any problems using this method

  • How do you create layers in flash builder?

    I was looking at this painting tutorial http://www.pixelhivedesign.com/Tutorials/Flash+painting+program/ and I was wondering how would you creating the layers in flash builder?

    I forgot that you do in Flash Builder. It must be a class unless you use mxml. So, here's a class that made the drawing:

    package
    {
         import flash.display.Sprite;
         import flash.events.Event;
         import flash.events.MouseEvent;
    
         public class DrawingBoard extends Sprite
         {
              private var board:Sprite;
              public function DrawingBoard()
              {
                   if (stage) init();
                   else addEventListener(Event.ADDED_TO_STAGE, init);
              }
    
              private function init(e:Event = null):void
              {
                   removeEventListener(Event.ADDED_TO_STAGE, init);
                   drawBackground();
                   board = new Sprite();
                   addChild(board);
                   stage.addEventListener(MouseEvent.MOUSE_DOWN, startDraw);
              }
    
              private function startDraw(e:MouseEvent):void
              {
                   stage.addEventListener(MouseEvent.MOUSE_UP, stopDraw);
                   stage.addEventListener(MouseEvent.MOUSE_MOVE, draw);
                   board.graphics.lineStyle(1, Math.random() * 0xffffff);
                   board.graphics.moveTo(mouseX, mouseY);
              }
    
              private function draw(e:MouseEvent):void {
                   board.graphics.lineTo(board.mouseX, board.mouseY);
              }
    
              private function stopDraw(e:MouseEvent):void {
                   stage.removeEventListener(MouseEvent.MOUSE_MOVE, draw);
                   stage.removeEventListener(MouseEvent.MOUSE_UP, stopDraw);
              }
    
              private function drawBackground():void
              {
                   with (graphics) {
                        beginFill(0xCCCCCC);
                        drawRect(0, 0, stage.stageWidth, stage.stageHeight);
                        endFill();
                   }
              }
    
         }
    
    }
    
  • How do you create a flash in-game popup on the same frame?

    How do you create a flash in-game popup on the same frame?
    I need to make a popup in flash on the same chassis. Basiclly as you reach the framework and randomly (I know how to do things at random) a popup can appear saying that you got a price; and I want that things in the back remains the same.
    Please help me!
    Thankx in advance.

    Code is placed in the timeline in the framework where you intend it to be.

    You have not given enough information to be able to help with your problem of var timer.  Try to reason it yourself well.

  • YOU create a microsoft account to use Windows 8 or 8.1? Should I buy a computer of WINDOWS 8 or buy a Windows 7?

    YOU create a microsoft account to use Windows 8 or 8.1?  I have a Windows 7 and I did nothing of the sort.  I have a Qwest email address and my email works great... just like my computer.  Looks like Microsoft doesn't really help people and has no members of support staff.  My service provider can be phoned and is relatively USEFUL.  I don't need that kind of aggravation of Microsoft.  I couldn't ask someone if I HAD to use a Microsoft account or not... and that he then had TO create a NEW EMAIL ADDRESS with hotmail JUST TO ASK THIS QUESTION.  WHAT GOOD IS upgraded my computer CPU and graphics card will be... If the operating system of Windows 8 is going to be a nightmare?  These enemies of Windows 8 are legitimate?  Should I buy a computer of Windows 8... or buy a Windows 7 computer.  Windows 7 FIXES the clichés and works exceptionally well.  I don't use APPS and don't know what they are.

    YOU create a microsoft account to use Windows 8 or 8.1?

    No, but you offer all of the benefits, if you as possibility to download apps from the store, PC, Skype, OneDrive synchronization.

    I have a Windows 7 and I did nothing of the sort.  I have a Qwest email address and my email works great... just like my computer.  Looks like Microsoft doesn't really help people and has no members of support staff.  My service provider can be phoned and is relatively USEFUL.  I don't need that kind of aggravation of Microsoft.  I couldn't ask someone if I HAD to use a Microsoft account or not... and that he then had TO create a NEW EMAIL ADDRESS with hotmail JUST TO ASK THIS QUESTION.  WHAT GOOD IS upgraded my computer CPU and graphics card will be... If the operating system of Windows 8 is going to be a nightmare?  These enemies of Windows 8 are legitimate?  Should I buy a computer of Windows 8... or buy a Windows 7 computer.  Windows 7 FIXES the clichés and works exceptionally well.  I don't use APPS and don't know what they are.

    You should compare and decide:

    http://Windows.Microsoft.com/en-us/Windows/compare

  • How can you create/go ' into a network?

    How to create a network?

    How are you networked?

    How to create a password to a network?

    Hi Gordonlee,

    Welcome to the Microsoft Community and thanks for posting the question. After the description provided to create a network in Windows 7.

    Answering these questions that would help us provide a better solution:

    1. what type of network you want to create?

    2 what type of network you create the password?

    Try these steps and check:

    Method 1:

    Visit this link to create a network:

    http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

    For more information:

    If you have three to 4 computers on the same network, and if they are using Windows Vista or Windows 7, visit this link to create a House Group.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

     
    Homegroup from start to finish

    Method 2:

    If you want to add a device to a network, visit this link:

    Depending on the operating system your computer is running, and if your network devices support newest technologies, the steps for adding a device or a computer to the network will vary

    Add a device or computer to a network

    http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

    Method 3:

    Visit this link and try the steps mentioned in it to secure a network:

    http://Windows.Microsoft.com/en-us/Windows7/making-your-network-more-secure

    If you have created a wireless network and you want to secure it visit this link:

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-security-key-for-a-wireless-network

    See also:

    Why should I get my wireless network?

    http://Windows.Microsoft.com/en-us/Windows7/why-should-I-secure-my-wireless-network

    If you want more response information and we will be happy to help.

  • How do you create you own toolbars custom

    How to create your own client toolbars in the latest version of Firefox version 39. Allows you to do this and it was easy as hell to do. Now I can't find this feature anywhere. How do you do that now? Because your FAQ on it look like all FAQS in existence... absolutely useless and a complete waste of time because they never understand MY problem.

    Has more easy ways to do this.

    I don't know what is your use case and you need but a few ideas to consider.
    Bookmarks Toolbar
    No doubt, you can imagine what is available in the Customize menu.
    Button-> customize menu {(trois bar icône) {[+])-> [see her hide toolbars]}}

    You can do on this space by nesting folders instead of having unique bookmarks.
    You my put other elements including icons and the search bar.

    Menu space
    You will have items in the menu that opens. You can edit to add or remove items. Space to develop according to the needs and will become scrollable.
    Try addons
    These adddons will create additional toolbars. (I have not tried)

    This one I have not tried recently. It has more than 1/2 million users and may be exaggerated, but will certainly you can add and customize toolbars, / especially if you want the old type on the bottom status bar

    (I note that this is not a signed addon I hope that doesn't become a problem)

  • Generate a pulse trains finished redeclenchables 2 of different duration using 2 counters

    Hello

    What I want to do is to generate at the same time 2 redeclenchables finite pulse trains using my PCI-6221.

    To be more clear, take a look at the attachment.

    Relaxation is in/dev/PFI0 for example and I want 2 impulses/dev/ctr0 and/dev/ctr1 at the same time.

    I can easily produce/dev/ctr0 or/dev/ctr1, but never/dev/ctr0 and/dev/ctr1 at the same time.

    It sounds feasible that I want to achieve?

    Thank you very much.

    Adrian

    I couldn't open your VI as I use LV 2011 on this desktop computer.

    However, you must just on delay initial as well as the low time some delay desired with respsect to PFI0 on the ctr0 task.

    Other NI DAQ products behave differently, but the 6221 uses "shortly" for the initial delay for each output reset after the first.

    Best regards

  • How do you create array of enumerations for transitions in a state machine?

    Hello

    I am trying to build a state machine, but I am struggling with understanding of the methods to determine what State to move to the next.  In other words, I have several States, but I don't want to go in any particular sequence.  If I States numbered 1 to 10, I want to be able to go 1-4-2-5-6-2-6-1-10 etc. in no particular order. I want the transition to the next State (and actions) to be determined by data stream, which may be random and require access to one of my 10 States at any time and in any order.

    I saw this photo on the white paper "Application Design Patterns: machinery of State", but it leaves out some important details.  How do I create the structure in BLUE showed 3 c?  When I try to create this table of enums, all are the same. I am not able to make a list of different enum values.  In other words, when I type '2', then all values in the Bulletin Board "2."

    There is a nice video example and easy to a state machine for the distribution of soda $0.15, however, this state machine moves in a single sequence of 5 cents, 10 cents to deliver; It does NOT illustrate the selection of a State "out of order".  I need to understand how a state machine can move State "5 cents" to distribute directly, with the addition of 10 cents in the State "5 cents.

    Can someone suggest a very good tutorial on how to make the switch to operate in a state machine?  I have read some documents available on ni.com, but, I can't find a good explanation of how do.  I remain confused.

    Or, you can just explain how they created the BLUE table in the attached picture?  Maybe I can understand it from there.

    Thank you

    Dave


  • How to specify the file of virtual hard disk when you create a new virtual machine using virtual hard disk on the data store?

    I'm new to PowerCLI and find quite simple, but in the documentation I read, I don't see how to use a virtual hard drive, existing on a data store when you create a new virtual machine.

    Is this simple registration on the virtual hard disk, or did I miss something?

    My current create VM is the following statement:

    New-VM

    -Name $TargetHostName -host $TargetVMCenterHost -data store $TargetVMCenterDatastore DiskMB - 20000 -MemoryMB $TargetHostMemoryMB -NumCPU $TargetHostCPUs -ID $TargetHostOS -CD -Description $TargetHostName

    Didn't notice this before, but I think that vSphere will use a backslash instead of a slash in the paths.

  • Session variable: How do you know where all that is used in the repository?

    Hi all

    We have a requirement where we need to convert a few session variables in variables to repository. For this we need to know where everything is this used in the repository and webcat session variable (including all logical columns use, which all guests use etc.). We tried the utility application, but that did not help. Is there another way to know that? You will really appreciate the pointers on your side.


    Thanks in anticipation,
    Karan

    Hello

    To search for variables used in,

    RPD: Open the RPD-> go to the Tools Menu-> select 'Utilities'-> 'Documentation repository '. This will generate a CSV with associations

    WebCAT: Open the using webcat catalogue Manager-> Tools Menu-> create report - select the desired columns (column Xml include)-> open the rpeort in excel find-> 'Variable' of what you can find the different variables used in the catalogue.

    Rgds,
    DpKa

  • How can I create extensible components for re-use?

    How can I create a button that stretches (such as the scale-9) with the text label? I create all of my graphics in illustrator rather than photoshop to get real FXG markup instead of embed all images?

    This has been addressed in the FAQ.

    Please see if the discussion he answer your question.

    -Bear

  • How do you create a PIN in safari?

    On my MacBook, I want to create a PIN for one of my frequently used Web sites. How should I do?

    Spindle Pinterest, Twitter, Gmail, Facebook or any other site you visit frequently throughout the day. Pinned Sites stay put on the left side of the tab bar, so you can easily get to them at any time.

  • How do you create a folder under all programs on the start menu?

    I am on 7 and want to create a folder under all programs on the start menu to contain all my design programs. How can I do this? There is no empty space to click in the menu that appears on right-click and choose new.

    Hello

    @ sharon you can remove your message if you have understood the thread Q

    @cbr_fox
    If you want to create the new folder in the start menu
    Right click on all programs< on="" newly="" opened="">< double="" click="" on="" programs="">< create="" new="">< rename="">< add="" the="" shortcuts="" of="" your="" programs="" to="" created="" folder.="">
    Now you can access the folder in the list of programs.
    Hope it solves your problem.
    Best regards
    Nikhil
     

Maybe you are looking for