How do you measure availability

Similar Questions

• How do you measure the NI 9505-"meaning current"?

  I have a cRIO module 9505 and a closed loop current control FPGA program is roughly based on the help file OR: ...\examples\CompactRIO\Module Specific\NI 9505\Current Loop\Current loop - .vi NI 9505 (FPGA).

  In both cases, and in my program, reported current (node of FPGA IO 'current sense") is an integral part of the control scheme, but I don't know units or how the number is measured.  (The documentation leaves a bit to be desired)

  The following comment in the file example FPGA 9505 confused me:

  "The AI Trig is used to trigger the current sampling. Sampling occurs at
  half the cycle PWM time (big time). There are 9 clock cycles, in this example,
  from the time a trigger is sent until the current is actually sampled. Therefore, a
  trigger is sent 9 clock cycles before the desired sampling point. »

  From this comment, it seems that the current I/O node sense is back from the instantaneous current.  However, because the signal from the motor control PWM, the current during the time must always be the same.  A signal PWM is either on or off.  If I only trigger a reading over time, my duty cycle should be relevant, right?  So, how would this function loop control?  Either "current" value is not instant or I understand the purpose of the "AI Trig" boolean.

  Second, how the number of cycles of clock between the trigger and the "current sense" read is known?  The comment says exactly 9 clock cycles.  I know that the FPGA and RT are deterministic, but how a programmer can know the trigger with this amount of precision delay?

  Thank you

  Ethan

  
  

• How do you measure per page

  The XL cartridges are better? How many pages do I get? When it comes to measure the yields of the page, it can vary from a cartridge of.  HP applies an industry standard to measure the performance of ink cartridges when five standard pages by using a collective combination of graphics and text to get the cartridge the results which are published.  It is worth noting that a separate performance standard applies for photos.  For more information of the returns, the tests carried out to get the returns and to see an example of the pages that are used in the test to achieve those returns. see this link here.  This site will have a link in it where you can watch specific cartridges too so that you can find specific page yield.  You will be able to search for wither by the name of printer or cartridge. I hope this helps.

  I hope this helps the community and that it is informative.

• How can you measure a wave of the ECG Simulator using a 6036e?

  I have an ECG Simulator I'd like to test. How I would setup a dac 6036E, scb - 68 card to test waveforms? Is there a screw that could help with this problem. Thank you.

  You're in luck.  NOR has a free biomedical Toolbox that should take you far: http://zone.ni.com/devzone/cda/tut/p/id/9037

  There is also a biomedical forum: http://decibel.ni.com/content/groups/biomedical-user-group

• How many alignments are available and how do you define them upward?

  How many alignments can be established in Instantis?  How do you define them to take advantage of all the possibilities?

  There are 5 alignments available, although the last is programs and acts differently from the rest

  Name of the alignment

  To change the name of an alignment, you must be in install or Reconfigure modes and you can change the name in the display settings of the Administration area.

  Activate the alignment

  To be able to see and configure an alignment, you must go to the area of Administration resources and permission change to your access profile see alignment in Navigation permission and then turn all the permissions you want for this alignment.  If you can not do something you want to do, it is because you have not enabled an authorization for this item.

  Set up your hierarchy

  Once the alignment is enabled and that you have all the necessary permissions, you can set up your hierarchy.  The usual starting point is company or organization. You can create a hierarchy of need.  If you do not have a good type desired, it can be added to the values of in the administration space.  Build your hierarchy, create desired measures based on finance, metric, calculated or items in manuals and align projects, proposals and ideas to create dashboards and reports.

• How can I change the scale when you measure the distance?

  When you measure a distance of 20 m on the pdr-drawing tool says 10 cm measurement. How can I change the scale? The notice said it's possible, but I don't know how I do

  Hi Bandreason,

  How to change you can visit this link: Adobe Acrobat x: change the measurement scale. ROCKY MOUNTAIN TRAINING blog document is for mac but option is the same.

  Kind regards

  Ajlan Huda.

• How can you interogate cmdlets to find all available objects?

  Being a new user of PowerShell I wonder how to know what items are available in a cmdlet?  I tried conducted by get - view and also custom format to find the available objects.

  How did the author of this code know that what follows is available under the Config object?  And how do you find all the other available objects?

  $VMHostView.Config.ConsoleReservation.ServiceConsoleReserved

  Using the Get-VMhost cmdlet for example, here is what I found.

  1. Get-VMhost | Get-View

  Duration: VMware.Vim.HostRuntimeInfo

  Summary: VMware.Vim.HostListSummary

  Material: VMware.Vim.HostHardwareInfo

  Capacity: VMware.Vim.HostCapability

  ConfigManager: VMware.Vim.HostConfigManager

  Config: VMware.Vim.HostConfigInfo

  VM: {VirtualMachine-vm-104, VirtualMachine-vm-37, VirtualMachine-vm-41}

  Data store: {Datastore-datastore-13, Datastore-datastore-15}

  Network: {Network-network-17, 18-network-network, network-network-19}

  DatastoreBrowser: HostDatastoreBrowser-datastorebrowser-63

  SystemResources: VMware.Vim.HostSystemResourceInfo

  Mother: ClusterComputeResource-field-c7

  CustomValue: {}

  OverallStatus: Green

  ConfigStatus: Green

  ConfigIssue: {}

  EffectiveRole: {-1}

  Authorization: {}

  Name: esx01.company.local

  DisabledMethod: {ExitMaintenanceMode_Task, PowerUpHostFromStandBy_Task, ReconnectHost_Task}

  RecentTask: {}

  DeclaredAlarmState: {10 - 1.host - alarm, alarm - 13.host - 10, 10 - 14.host - alarm, alarm - 15.host - 10...}

  TriggeredAlarmState: {}

  AlarmActionsEnabled: true

  Tag                 : {}

  Value: {}

  AvailableField: {}

  MoRef: HostSystem-host-10

  Client: VMware.Vim.VimClient

  1. Get-VMhost | Format-Custom

  class VMHostImpl

  {

  State = connected

  ConnectionState connected =

  PowerState receiving =

  VMSwapfileDatastoreId =

  VMSwapfilePolicy = inherit

  ParentId = ClusterComputeResource-field-c7

  Manufacturer = HP

  Model = ProLiant DL380 G5

  NumCpu = 8

  CpuTotalMhz = 23992

  CpuUsageMhz = 88

  MemoryTotalMB = 8190

  MemoryUsageMB = 1369

  ProcessorType = Xeon of Intel (r) CPU X 5450 @ 3 .00GHz

  HyperthreadingActive = False

  Zone =

  class VMHostTimeZoneImpl

  {

  VMHostId = HostSystem-host-10

  Description = CDT

  GmtOffset =-18000

  Key = America/Chicago

  Name = America/Chicago

  }

  Version = 4.0.0

  Build = 256968

  CustomFields =

  [

  ]

  ID = HostSystem-host-10

  Name = esx01.company.local

  }

  To get all the properties of an object in PowerShell, you can use the Get-Member cmdlet. But if you want to get all subproperties that can take time. Fortunately, there are scripts that you can use to do this all at once. For example, take a look at the Get-ALLPropertyNames function on the list of all properties and subproperties of a variable in Powershell.

  Best regards, Robert

• How do you solve 'could not complete video frames to layers command because DynamicLink is not available "?

  For some reason any this message when I try to import video frames to layers. Why? I have seen that many has the same problem. How do you solve this?

  I use Photoshop CS6 extended. Help, please.

  I found a youtube video, giving an alternative to this prblem. I tried and it works atually!

  SOLUTION OF SPARE question Photoshop CS6 dynamic link - YouTube

• How to you turn off auto-play the HTML5 videos in Safari?

  How to you turn off auto-play the HTML5 videos in Safari?

  I speak not of advertising videos.  It seems that there is a new trend that sites add the AutoPlay videos as part of their normal textual content.  It's really annoying to try to read the article and have this semi-connexes video game.

  Is there a Safari Extension or a hidden setting I'm not about to stop video AutoPlay altogether?

  Thank you

  Stan

  ForeverTangent wrote:

  Is there a Safari Extension or a hidden setting I'm not about to stop video AutoPlay altogether?

  There is a preference setting or an available extension.

• How do you create you own toolbars custom

  How to create your own client toolbars in the latest version of Firefox version 39. Allows you to do this and it was easy as hell to do. Now I can't find this feature anywhere. How do you do that now? Because your FAQ on it look like all FAQS in existence... absolutely useless and a complete waste of time because they never understand MY problem.

  Has more easy ways to do this.

  I don't know what is your use case and you need but a few ideas to consider.
  Bookmarks Toolbar
  No doubt, you can imagine what is available in the Customize menu.
  Button-> customize menu {(trois bar icône) {[+])-> [see her hide toolbars]}}
  
  You can do on this space by nesting folders instead of having unique bookmarks.
  You my put other elements including icons and the search bar.

  Menu space
  You will have items in the menu that opens. You can edit to add or remove items. Space to develop according to the needs and will become scrollable.
  Try addons
  These adddons will create additional toolbars. (I have not tried)

  • Roomy Bookmarks Toolbar 1.4.9.1 - signed
    https://addons.Mozilla.org/firefox/addon/roomy-bookmarks-toolbar/
  • Multirow Bookmarks Toolbar most 1.2.1 - signed
    https://addons.Mozilla.org/en-us/Firefox/addon/Multirow-Bookmarks-toolbarplus/
  • Other options are trying a Search

  This one I have not tried recently. It has more than 1/2 million users and may be exaggerated, but will certainly you can add and customize toolbars, / especially if you want the old type on the bottom status bar

  • Classic theme restaurateur (CUI) 1.3.5
    https://addons.Mozilla.org/en-us/Firefox/addon/classicthemerestorer/

  (I note that this is not a signed addon I hope that doesn't become a problem)

• How can you change a text in an image?

  How can you change a text in an image?

  Hi Jasper,.

  It depends on how the text has been staged, and what has been done with the image after that.

  A quick test - what happens when you zoom in on, or enlarge the image?

  If the text retains its edges when amplified, then it can probably be edited separately from the image. If the text begins to show pixelation on the edges (like the picture), then there is no text to change, what looks like adding text is actually part of the image and can only be changed in the same way that you can change anywhere in the image.

  Here is an example:

  

  The photo is a photo (jpeg format), inserted in a Pages document created with the essay template. White text in the upper left corner of the photo is placed in a text box. To put the photo on this page (and the text on and around it) has been converted to a PNG file. When it is enlarged on this screen, the text finally a pixelated image...

  

  .. .the easily noticed in the thin relates diagonal 'o'.

  In Pages, however, the text and the picture are separated, and the text is a vector image - mathematically trained and scalable.

  

  The text here is contained in a text box and the text box was grouped with the photo. To change the text (in Pages), I need to:

  • Click on the text.
    Handles will appear in the corners of the selection.
    That click you select either the entire image OR just simply the text box.
    • IF the handles are blue x characters, the selection is locked
      Go organize (menu) > Unlock
      Sectionals unlocked handles are small white squares.
  • IF the selection includes the entire image
    • Go to the menu, rearrange and choose ungroup
      If the choice to separate is not available, the text may be part of the image and uneditable as text.
      Try to click twice (separated from the clicks, not double click).
      If the insertion point (|) is now in the text, the text is editable as text.
      Change the text.
  • IF the selection looks like a text box and does not the whole image
    • Click on the text to place the insertion point (]) in the text
      Change the text.

  Image showing the insertion point in the text in a text box on the image:

  

  Kind regards

  Barry

• How do you get your music original availible to the public

  How do you get your original music available to artists

  Princes.

  Many artists display their titles on SoundCloud, where you have the possibility to make downloadable or streaming only.

  For retail sales, the most popular output for independent artists is Bandcamp.

• How do you attach a 'job action' of a droplet? The menu is there...

  This has been discussed before, but I could not find a recent conversation that relates to the latest version...

  Compressor 4.2.1 OS X 10.11.2

  As noted earlier, when saving a SETTING as a DROPLET, it doesn't seem to be a way to attach a REVENDICATIVE ACTION. You can add a job ACTION in the compressor interface itself.

  Yet, when you drop a file on the drop you see a menu of ACTION WORK... it is simply not available.

  

  So, how do you get a JOB ACTION appears here?

  Thank you
  -Joseph

  Take one of the built-in presets that includes a work action (as published on Vimeo) and reproduce them. Rename it. In the Inspector > Description > Action, select the action of those on the list. In the settings list, open the disclosure triangle to reveal the A / V settings and in the Inspector to make the adjustments you need. Once completed, in the settings list, control click > save as drop.

  Russ

• How would you do that? 2 case of a test station

  I have a sequecne that works great stand alone, that now we want to add another test power to the system. It is not as easy as it may seem, here are the conditions and what we intend to do. I need to have either 2 instances of the running program or configure the sequence in batch or in parallel, but I'm a little confused on how to do it properly.

  Features of the system:

  • 2 - test fixtures with 24 pieces in each. The sequence works fine now with only one test. I decided not to do a batch with these 24 pieces because I have a single DAQ mx read for all of the object to be measured and there is no need to follow every 24 parts. they're all to fail.
  • The two test devices will use the same DAQmx device for measurements. Compaq DAQ with USB (device 1 is for the test set-up 1 and 2 is for the test set-up 2)
  • They share a DIO Board for some discreet signals.

  My questions:

  1. Socket 1 or 2 Socket may have parts on them separately. A my load 1 operator and not the other and start the test. During the test, they can load up to 2 and start it too. Both must run exercise but share the Compaq DAQ device
  2. How do you run the shared resource (lock during the measurement, semifore?)
  3. Is this possible at all?
  4. Can I run two instances of the same UI? It would be the ulimate. With 2 points of entry and 2 displays for the recall of the UI to write to.

  Thanks for any input you can give me.

  You can have several instances of TestStand running almost any version.

  Here are a few options:

  1. run two user interfaces and usage and asterisk to prefix your lock names (for example "* DAQmxDevice").  This lock will then share in all of engines.  In fact all steps of synchronization may use the * to precede the name of share it across engines.

  2. create a custom with 2 managers running user interface and then 2 sets of views of implementation on the front panel.  When they execute you can somehow indicate the file in sequence (with a UIMessage) whose execution were fired off the coast.  Then, he will know which set of DUT it is testing.  Use of the * tip for your locks.

  3. what you should be making use of the parallel model.  It takes care of everything in your needs right out of the gate.  In other words, the user can run what socket they want from the parallel dialog box.  Use the normal locking mechanisms.  I've attached an example.

  You will get the best performance and control of option 3.  Suffice to say.

• How can I measure the output of a sensor pwm ultrasound using the module or 9403

  How can I measure the output of a sensor pwm ultrasound using the module or 9403

  Khalil,

  When you say 'measure' the PWM signal, exactly what to tell you?

  You're looking to measure the frequency or cycle of the signal function? You count the edges of the PWM output increase? Looking to control the waveform?

  With reconfigurable FPGA hardware, it is up to the user to define the function of the physical i/o on the FPGA chip. By connecting the signals as Adam suggests your digital pulse will be brought to the cRIO. In your FPGA program, you define the function. You can set a base counter or transfer digital data from single point to welcome you cRIO for floating-point more complex treatment. Example FPGA programs are located in the http://www.ni.com/IPnet.

  Hope this helps, please post any additional questions.