How does 3G on the Tecra M10 - 11V?

Similar Questions

• Install of Win7 64 bit on Tecra M10 - 11V

  I have to update the Bios before a clean install of Win7 64 bit on my Tecra M10 - 11V?

  Should I regularly check and update the Bios?

  After installation the program "Toshiba Software Installer for Windows 7" find and update all the drivers and the necessary utilities?

  Thank you

  In my opinion you should not update BIOS. You have the latest version of BIOS 3.0 installed on your Tecra?

  Can you please tell us what you want to do exactly? You want to upgrade Vista preinstalled or you want to do the new install of Win7? If yes how do you do this? With the help of the Microsoft installation disc?

• Blue screen of death, the Tecra M10 runing Win XP

  My Toshiba Tecra M10 works like a dream for three years without ever gasp

  Until the other day.

  My Toshiba laptop is constantly cycling with a BSoD - then I will start windows - it looks like it'll work - it gets in the paper password on screen - then a few blank screens - BSoD then again repeatedly

  I am running XP Pro SP 3

  I couldn't get my laptop to stop doing this, so I removed the battery and then the power cable and it started again and then when he went to BSoD I took a picture of the screen with my digicam fortunately I have one that focuses immediately and take the picture instantly too

  the ERROR is

  BAD_POOL_CALLER

  Tech Info

  STOP 0X000000C2 (0 X 00000043, 0XC38C0000, 0 X 00000000 0 00000000)

  I haven't changed anything on my PC recently and I have tried all the beginning of the top safe mode and last known good configuration but it still cycles round and round and round

  This laptop is not connected to anything and comes standard with a module of memory 2 MB in it to bog

  the last known good configuration does not either, nor did one of the other options in the "safe".

  So I slipped on the HARD drive and tried to boot from my XP CD - not the recovery of Toshiba, one that I have not tried this one in the laptop again.

  Rather unsurprisingly with no HARD drive in the laptop, I got a different error

  STOP 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  which is I believe the inaccessible boot device - I know, it cannot see the HARD drive because it is sitting on my desk but would wait to boot from the XP CD... ISN'T IT?

  I tried to set all the parameters by default both boot - no difference

  With the HARD drive in - the laptop boots as windows user enter screen with no problems but doesn't stop on this screen - after a few screens blank the BSoD comes up and off it goes again.

  In the advanced startup options, I changed auto-start on setting error so it does not loop forever. and this prevents loop to the start cycle... seems to be changing this setting is not a permanent change

  Then I went into the BIOS and under the mode of the SATA AHCI to IDE controller and the STOP error 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000) is gone now and the pc will try to install Windows until I need to see the HARD drive and then gives up trying to install XP with a no. HHD error (the HHD is based of course on my desk) so it was a valid error expected...
  put the HARD return drive without changing the BIOS back makes it appear the STOP 0x000000C2 (0 x 00000043, 0xC38C0000, 0 x 00000000 0x00000000) error

  HELLLLLLLLLLLLLLLLLLLP please

  Hello

  I think you should test the HARD drive don't you agree?
  In my opinion, this should be the first part that should be checked since the new operating system installation was not possible

  I recommend the use of the tool called: HDD Drive Fitness Test. This software creates a bootable floppy to test. You can use this disk to run a test HARD drive without installation of any system.

  If the error would be detected: replace the HARD drive.
  If no error would be: use the Toshiba Recovery disk in order to install the system. (don t forget to put back the BIOS to default)

• Re: Sound does not work on Tecra M10

  Hi all

  I have a Tecra M10 with XP and all the drivers installed, but sound does not work.

  I checked the Device Manager and everything is fine, no red cross or whatever it is on the driver realtek audio.

  Everything on the sound properties. I even uninstalled and downloaded the audio driver from the toshiba site again but still no sound and no mistake.
  Can someone help out here?

  Thank you.

  Hello!

  The sound is turned off on your laptop? With the FN + ESC key combination you can enable/disable it.
  Check it!

  In addition to the high definition audio devices you need two patches from Microsoft to go looking for the proper functioning. Have you installed the two?
  Here are the links to the Microsoft Knowledge Base where you can download both:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  Good bye

• Question of updating the BIOS of the Tecra M10

  Hello

  I own a Tecra M10-10 q (abbreviated model: PTMB1E)
  I received a few days ago an automatic alert of Toshiba TEMPRO to inform a new BIOS driver.

  After downloading and extracting the .zip file, I launched the executable: P0065v190.exe
  Asked me to confirm that I want to date of current version BIOS BIOS package version 1.90 1.50

  When I click on 'Yes', I got a popup window titled: "TOSHIBA BIOS Package version 3.2.9!
  with between other precautions, the following statement:
  "Disable BitLocker Drive Encryption in Windows Vista before updating the BIOS"

  A google search on what is "BitLocker Drive Encryption" and how to disable it, informs that it is under the heading 'Security' in the control panel.
  However, I can't find anything like "BitLocker", when I click on 'Security' in the Panel!

  So, I cancelled the update procedure. But I like to keep my system uptodate!
  What should I do? Where to find the BitLocker? How to make a such BIOS update?

  Thanks in advance.

  Hello

  Windows Bit locker drive BitLocker is a data protection feature that is available ONLY in Windows Vista Enterprise, Windows Vista Ultimate and Windows Server 2008.

  If you don t have one of these versions of Vista, then a Bilocker is NOT available on your preinstalled system!

  With regard to the update of the BIOS;
  I'm always that notice; never change a running system; so, if the laptop works properly and without problem a BIOS update is not necessary that s my personal opinion

  See you soon

• How does influence if the terms of a blanket purchase agreement have paid on "Reception".

  Hello gurus,

  What will be the impact if the terms of a blanket purchase agreement have paid on "Reception".

  I understand for a standard purchase order if the terms are paid on the "receiving", as soon as the OP is acquitted, it will be converted to an invoice.

  Now for a BPA, how does that help?

  Thanks in advance,

  Germany

  This property will be inherited by the child documents (e.g. standards)

  purchase orders, releases etc.) created regarding the open orders.

  The game, community-admin 03:32, 2 April 2015

• How does he know the closet printer printing location in function?

  I understand the concept, but how does he know which is the closet printer?

  The closest printer is determined by a set of rules that you configure in the GPO to print based on location. Essentially, you configure a rule that must match a user, individual, group, IP, MAC, or range of IPs/MACs which maps the nearest printer to set up Configuration.

  For a group of Marketing, you re the printer in the marketing area.

  For a printer in a given area, you could configure the clients nearby to all in the same subnet and then configure that range from subnet to map to the closure by the printer.

  Let me know if you have any other questions.

  -Mike

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• How do I disassemble the Tecra 8100

  I had power supply problems with my laptop recently a model of laptop Toshiba Tecra 8100 No.. PT810C.
  The cap on the back for power was coming loose. It was firmly attached, but power on the laptop out, relying on the cord at the back in general would result in turn. It's probably just a connection not tight with only one hardware item, and I am currently disassemble the laptop, to see if the problem will be easy to fix.

  Now, I already said, removed all the various material on the bottom which is detachable, more unscrewed the screws holding things together, but I hit a snag. I can't find where things are held together and do not have a good scheme to look to know. Does anyone know where I could patterns for these types of devices, or even a guide for anyone new to dismantling computers laptops?

  And not to be rude, but please don't post any warnings on the dangers of the work on laptops or suggestions I have a professional working on it.

  The value of the laptop is signifigantly less cost to ensure that the work, which means that is not an option, and even if I made a mistake and the ruin of the laptop, it is nothing more than a paperweight as it is currently.

  Hello

  The problem is that a manual disassembly are not published by Toshiba :(
  I think that these documents are not for public use and, therefore, it is really hard to find all the details.

• How does one increase the number of entries in the drop-down list of the address bar?

  It seems that the number of entries in the drop-down list of the address bar is limited to twelve URLS. I would find it convenient that more than twelve years can be shown, but do not know how to increase the number.

  Increase or decrease browser.urlbar.maxRichResults using Subject: config

  • http://www.mydigitallife.info/change-the-maximum-rich-URL-listings-in-Firefox-awesome-smart-location-bar/
  • http://KB.mozillazine.org/about:config

  NOTE: The FasterFox extension may affect the number of items displayed if you have it installed (addons > Extensions).

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Tecra M10 P8600 - same for the Tecra M10 P8700 image?

  I'm about to buy another laptop for work and there is as always a few M10 is available to suppliers.
  My question is an image we have for the M10, but for a machine with P8600 work in a more recent machine with a chip P8700?

  See you soon

  Hi Elwyn,

  Try it if you can use another image and then post your results here! ;)
  I put t know too

  The point is that if you buy a new laptop, you must create a recovery Toshiba again disk using Recovery Disk Creator. Therefore, you need 1-2 DVD blank and a few minutes. All that s!
  :)

• How does one remove the words click on box of

  Relatively new to Captivate 6.  By practicing with creation of a click box, the action is simple.  My problem is that resizing after the box, the words click on box to stay.  Is it possible to delete these words?  I tried to click inside the box, but it does not my cursor be placed inside.  Thank you!

  Your question is indeed due to your lack of experience with Captivate.

  A click box is just a key area that you can add to a slide.  It is not the same as a text box, transparent button or a smart form button that can also contain text.

  You must watch the box click in edit mode to see the words click on box that appears.  When you publish the project, the click box will be invisible to the user, but always responds when you click on it.

• How does Compression affects the integrity of the colors?

  

  When the compression is not completely spoil the colors, it often simplifies the image and functionally Pixelation it.

  The pixelated above image has the same balance of color than the other two.

  So, how compression affects the integrity of the colors?

  Think of an image as having two distinct layers: black & white, layer on which the color information are asked by the layer of color.

  Bad compression also uses sampling poor color - aka color resolution - to record the size of the file.  It will be the average of the values of two adjacent pixels of color to create a larger pixel of color avaraged.  If it's REALLY bad--as in the video DSLR and HDV - it will average the colors of adjacent pixels of the average color pixels FOUR an even bigger.

  And what do you think would make the integrity of the color?

• How does binds to the Dimension Tables.

  Hi all
  
  One explains how the ROW_WID of the table dimension and the related column in the fact table is filled with the same values in different mapping?
  
  Consider if we want to develop a new fact and dimension tables, how do I apply for the ROW_WID and the join between the fact and dimension.
  
  Thanks in advance.
  
  Concerning
  Vishwanath

  Hello

  Essentially in BI dims applications all are first populated and each dim table has a column of wid row outside the primary key (datasourceid + integration id) combination. If you open a seeded map and you will see this line wid column is filled using a reusable sequence generator transformation. Then every time u run this mapping the Feds line change...
  Now go to the facts... as a normal rule in ETL u run the facts after all the dimensions... If you open any map done planting you can observe all the facts has an associated wid the dims, he joined to... so if a fact joins 3 If stump so there will be 3 Feds associated with each dim. The Feds are again filled with a search on the dimension table and line extraction wid bad ID the Sun. If u get wid of the dimension row in the column of wid the fact... Please let me know if you hv questions

  Regarding
  VINET

• How does an increse the size of toolbars

  The top of the file, edit, view, etc. ; links that are open, the search bar and the toolbar of book marks are only about 1 1/2 inches high all together. And real small fonts. Difficult for me to see. Is there a way to increase this?
  Thank you
  Nick

  You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

  • http://KB.mozillazine.org/about:config

  See also:

  • https://support.Mozilla.org/KB/Forum-response-zoom-feature-on-Firefox-22

  An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

  You can watch this extension to adjust the font size for the user interface.

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/