Satellite L20-181: Impossible to activate the display on the TV

Similar Questions

• Satellite Pro 400CS: impossible to activate the APM

  Hello, I have on my pro 400Cs satellite I installed windows. In the equipment manager, APM support is disabled. If I have, it will activate and after a reboot it am off again. In addition, the announcement of the battery is missing. Sleep mode does not go as. If I have the software utility downloade it indicates with the announcement of the program Toshiba stack.

  What it am I do?

  By
  Frank

  Hello

  This device is a good old classic. As far as I know that it s about 10 years.
  It was delivered with the Win95 and Win98.
  Well, I can't give you a solution to your problem because this unit is too old.
  You'll be a man of luck even if someone here in the forum knows an answer to your problem. All I can suggest is to check the BIOS. Maybe that here you can activate or change it in addition the battery settings.

  Good luck

• Satellite Pro P300 - impossible to activate the built-in microphone

  I bought a Satellite Pro P300 some 2 months and so far so good.

  It has a webcam which I really thought that I would have any use for it but now find that I have.

  The camera works fine but I cannot activate the built-in microphone.

  Can someone point me in the right direction please

  Hello

  You will need to start the webcam software if you want to use the internal microphone too.
  The point is that the internal MIC is connected with the internal webcam and webcam software handles both devices.
  Also check if the internal mic has been correctly enabled in the webcamsoftware

  In addition, I would recommend updating the audio driver.

  Best regards

• Satellite A350-212: Impossible to activate the microphone

  Hello.

  I have laptop toshiba A350-212 and I have problem w? micro th.
  I disable audio device after that I can't enable this device again.

  How l? He's I resolve this problem.

  Hello

  Please check the settings in the control panel-> audio-> recording
  You should see the microphone and should be able to activate this once again.

• Satellite L505-13F - impossible to activate the wireless connection

  Hello, I have connectivity problems with my Satellite L505-13F.

  I can't turn on the wireless connection. I press Fn + F8 and nothing happens. The indicator at the bottom of the laptom turns on.

  I though this would be a problem with the drivers. I downloaded realtek wlan driver here [http://aps2.toshiba-tro.de/wlan/?page=downloads], but it has not installed correctly. Then I used the toshiba software installer, but yet again, nothing has changed. I have Windows 7 Home premium 64-bit.

  Device management, I have seen that I installed a wifi driver. (Realtek RTL8191SE Wirelless Lan...) So, what the problem is?

  Any suggestions?

  Hey,.

  Something happens if you press other keys FN or FN + F8 doesn't work only? Normally with this key combination you can enable/disable wireless network card.

  In addition, it would be interesting to know what happens if you are looking for WLAN networks. You see your WLAN router?

  If all the keys FN n t work, reinstall the package of added value and utility to Support Flash Cards. Otherwise, it could be another problem and you should reinstall the driver again and make sure the firewall isn't blocking the connection.

  See you soon

• Re: Satellite L100-179. impossible to activate the new WLan card inserted

  Hi all

  I bought a computer laptop satellite L100-179 wireless about 2.5 years ago.
  Last week I bought an Inter (R) PRO/Wireless 2915ABG Network Connection, this is an internal card!

  I installed the card and the latest drivers and the card worked properly under Device Manager
  When I tried to use the card after setting the wireless settings, I started to have problems.

  I then installed the software for the card help with the problem which has been the software Intel(r) PROSet/Wireless WiFi 12.1.2.0 that gave me a little more information about the problem. All the settings for the wifi are enabled except when I press Fn + F8 I get the following message:

  Wireless communication is disabled. Please turn on the wireless switch.

  But there is no switch on the side of the laptop just a plug of cache.
  I've ran out of ideas to get this working and would be really grateful for the help.
  My OS is XP home SP3.

  Hello

  I think that your Sat L100-179 is not extensible WLan.
  If this laptop has been delivered without the WLan card and the WLan switch does not exist, then you cannot use an internal WLan card!

  In this case, go to an external solution such as a USB WiFi key for example

  Welcome them

• Satellite L20-181: the WLan switch is not available - cannot activate the Wlan antenna

  I have a Toshiba Satellite L20-181 and I bought an Intel Mini PCI Wifi Pro/Wireless 2200BG so that I place it in the empty Mini PCI connector it has in order to have the wireless.

  While I placed it on a regular basis also antennas etc the Intel utility sends me a message that the network connection is disabled and that I should use the switch on the front panel of the laptop to turn it on.

  This switch located in the laptop from the front is a button that is not reinforced.

  Any ideas guys?

  Hello

  You may need to press the button?
  Also, I found a Satellite L20 manual on the Toshiba site and there I found information that the WLan functionality is not available on all models.

• Extend the RAM of my Satellite L20-181

  Hello world!

  I have a problem and hope to resolve it here, with your help... so:

  I have a toshiba satellite L20-181, model PSL2XE... and I want to add more RAM.
  The guide says that only the PC2700 and PC2100 are compatible; but surprise... I installed a memory module on the system (from the factory) with the following tag: 256 MB PC2 - 4200 s-444-12-C3... so a PC2-4200. Now I am confused... what type of memory should I use?
  Thank you very much!
  N.

  Hello

  You must use the modules DDR2 with minimum of 533 Mhz. I googled for your type and the chipset is an ATI chipset in need of DDR2 RAM.

  And the concern of Don t for the timings, it should be OK despite all the modules you use, because almost all of the modules available to consumers have ALMOST the same timings...

  Welcome them

• Upgrading processor on Satellite L20-181

  Can I insert in my laptop Toshiba Satellite L20-181 (Intel Celeron M 380 processor) Intel Pentium 4 processor 521 (for laptop)?

  Sorry, my English is weak.

  Hello

  No, to my knowledge it of certainly not possible to upgrade the satellite L20 with a processor Intel P4 CPU.
  As far as I know that the motherboard supports a mobile Intel socket 479 and it should be possible to use only the processors Celeron-M as follows:
  Intel Celeron M 350 (1.30 GHz) - 360 (1.40 GHz) - 370 (1.50 GHz) - 380 (1.60 GHz) with 400 Mhz FSB

  In my opinion the stronger processors will cause overheating.

• Upgrade memory of satellite L20-181

  Hey all

  I want to upgrade memory on my Toshiba Satellite L20-181.
  Now I have 256 MB and I want to add another stick of memory to 256 MB.
  Could you please inform me about the type of memory has this laptop?
  On the site it is said:
  Standard system memory: 256 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM

  DDR2?
  A link with such a memory would be very useful.
  Also, anyway to buy memory online?

  Best regards

  Hello

  The news that you are quite right. Toshiba has tested this laptop with the memory modules to follow:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  As you can see it's memory module DDR2 and if you use the part (PA.) to the Google number, you will find many online offereor where you can order this tested memory. I recommend buying the original or perhaps module of Kingston. On this way, you will be sure that the new module will be recognized correctly.

  Good luck!

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think