How dumb you down a small business SF300 until a transparent bridge?

I use the Cisco SF302 switches as a connection to wireless devices that will be the link between the two buildings.

In this configuration: Cisco 3570 in building 1 > Cisco SF302 > 1 wireless bridge construction > construction 2 Wireless Bridge > Cisco SF302 > Cisco 3560 in building 2.

It seems that by default the SF302 are not acting as bridges, transparent and just leave all my 802. 1 q through traffic.

How dumb them down for that all 802. 1 q traffic is treated by the 3570 and 3560 with just SF302 acting under the bridge let my 802. 1 q to cross safely?

Thank you.

By default, VLANs are not automatically added to trunk ports. You must create them and assign them to the trunk ports. This has been done for security reasons.

Tags: Cisco Support

Similar Questions

  • Accounting on a Cisco Small Business SF300-08

    Hello

    "Cisco Small Business 300 Series managed switches Administration Guide" and the sheet indicate that this switch can make requests of accounting with a Radius server. On the switch interface/CLI SF300, there is that the authentication port, the port of account cannot be resolved (and nothing is sent by the switch to the default port). I guess that the SF300-08 doesn't manage accounting. Maybe I need to change to another model. Could you give me another model in the same price range?

    Thank you

    Laurent.

    Hi Laurent, I am pleased that the 1.2.5.70 has solved this problem.

    Please keep Advisory of the 1.2.5.70 firmware has also been lifted for now.

    Please note that we have identified a potential problem with the 1.2.5.70 update for the series 200, 300 and 500 switches. As a precaution, we took down the 1.2.5.70 free while we determine the cause of the issue, the seriousness and the scope. We re - ask the release or publish an updated based on the results of our analysis.

  • How do you remove the catalyst business websites

    How can you permanently delete old catalyst business websites.

    I tried to delete permanently all these old business catalyst sites that keep appearing in the sidebar that says "Web Sites" and you can 'See' or 'Manage' their. But every time I try to manage that they want just a blank page worldsecureserver.net or something. What should I do?

    You should post in the forums Business Catalyst here http://forums.adobe.com/community/business_catalyst. They will be able to help you.

  • How can you get windows 7 business games?

    We loaded business 7 on several of our computers in the House, but there are no games in the Games folder.  I searched through microsoft.com and have not found a way to get these games.  Does anyone know how to get the games

    Thank you

    Kile

    Hello Kilenightingale,

    Press Start
    -> Control Panel
    --> Programs
    ---> Turn Windows features on or off

    The top of the list of components, you should see games. Select this check box, or drill into it and specify the individual games. And press OK. In a few moments the games must be installed.

    Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • Small business SF300 waterfall

    Hello

    I have 4 switches SF300, I need cascade together but the user guides do not appear to cover the physical aspects of the waterfall was cheating him.

    Here's what I was going to maybe someone could check the installation or me to benefit from their experience.

    SW1 (port GB2)--> SW2 (port GB1)

    SW2 (port GB2)--> SW3 (port GB1)

    SW3 (port GB2)--> SW4 (port GB1)

    SW3 (port GB2)--> (port GB1) SW1 - loopback for redundancy of cascade cable.

    Is that what that sounds right?

    After the first use Setup will be changed to place the switches 3 and 4 in a factory, date at which we will then use the GBIC connectors and fiber to connect SW2 SW3, and then back to SW1-SW4.

    Thanks in advance for the help.

    Gary

    Hello Gary,.

    The connection you described works well for these switches. It allows for up and down traffic to use the ports in concert but also to provide redundancy.

  • How do you get the smaller screen I can see the theme?

    I downloaded a theme from Charlie Brown and because the Firefox screen is so large, I see only the top of the head of Charlie Brown, Snoopys.

    Assuming you're talking about a light Theme (formerly Personas), the picture above will not fully be displayed unless you have 6 to 9 toolbars displayed on the top of the browser window.

    https://addons.Mozilla.org/en-us/Firefox/themes/

    If you want to see more of this image, add empty toolbars via the function "Customize."

    https://support.Mozilla.org/en-us/KB/customize-Firefox-controls-buttons-and-toolbars

    You will need to add at least one empty space to each new toolbar, you create, or the new toolbar will not only save may not be completely empty.

  • How can you down load movie maker in xp

    I have selected the automatic updates according to the guidelines and still can't download movie maker. It keeps taking me in circles with directions. Is it possible to just download?

    Hello

    I suggest you to download Windows Movie Maker from this link and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows/downloads/get-Movie-Maker

  • How can you get 5.5 Captivate to support the transparency of the imported images?

    published_screen_shot.jpg

    Above: Above is a published video.  The edges on the PNG make their appearance in stairs, a side effect, which I assume is the result of a transparent background around the circle.  Why not Captivate handle or better supports transparency?  Should I use a different file type?  Does anyone know how to fix this?

    progress_pie_test.png

    Above: This is the image imported before being imported.

    program_screen_shot.jpg

    Above: Here is how the PNG looks in the preview of Captivate film.

    Hello

    What is the quality of the slide that you use? Since you need transparency, the default Low 8-bit should be changed to High or optimized. This can be done on a slide-by-slide basis or you can substitute the present slide quality settings on the edition and have all the slides selected at that point to high heat.

    Lilybiri

  • How to go down rather than automatic round until a.5

    I really lost my neurons to find the formula adapted to achieve this!

    I need to be able to round off the result of an equation. Of course the Labview compatible with IEEE would always round.5/top. Is there a way to get what I'm after?

    Thank you very much

    Waris K

    Round towards - Infinity does the job?

  • What kind of material I have to put in place a network of small business?

    you have a small business with 4 desktop systems and 2 laptops mobile network. you want all of their network. What haredware would need to connect desktop computers and laptops to another so that they can share information?

    Each computer will need a wired or wireless adapter. Depending on what cards you choose / have you'll need a router wireless and wired.

    Since you have a laptop I guess they already have wireless adapters. In this case, you would want a wireless router. In my view, 802.11n, n being the important part, is the last great in the wireless.

  • downloaded the trial version Microsoft Windows Small Business Server (SBS) 2011 Essentials to my laptop (Windows 7, IE 9) but now I can not understand how to open it

    (1) downloaded the evaluation version Microsoft Windows Small Business Server (SBS) 2011 Essentials to my laptop (Windows 7, IE 9) but now I can not understand how to open it

    (2) in addition, I want to assure you that I understand how the server works.  Is it just software?  No box to connect the computers up to?

    Hello

    The question you have posted is related to Small Business Server 2011. Please post your question in the Forums of Windows Small Business Server. Consult the following link:
    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver2011essentials/threads

    Hope this helps

  • I want to install my office small business 2003 on my new laptop but can't find the installation cd. I have all the license information. Can Microsoft help me to make it work on the new laptop? Thank you.

    I want to install my office small business 2003 on my new laptop but can't find the installation cd.  I have all the license information.  Can Microsoft help me to make it work on the new laptop?  Thank you.

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon. Mick Murphy - Microsoft partner

  • How many licenses are delivered with the package of creative small business cloud?

    Right now, we use these two licenses for our current subscription of CC. I just need one more, but Adobe would force me to get a membership share whole for a total of 4 licenses and double the price. I noticed that the small business plan is $ 70 per month and I wonder how many licenses it is equipped. Thank you

    Hello

    The plan that you're talking about $ 70 per month is for 1 license creative cloud for teams.

    Pricing plans and creative Cloud membership | Adobe Creative Cloud

    Kind regards

    Sheena

  • How to change the record to a local drive on network drive for all users (Small Business Server)?

    I need to implement a change on the backup to a local drive to save to the network drive/folder to 15 users in a Small Business Server, can someone help?

    Thank you

    Hi Frydom,

    Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forums.

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  • You need to add a 3rd WAP to existing small business network. Where I start?

    The network has 26 ports Cisco switch and 2 existing WAPs, 1 of which is an air 1040, and the other I'm not sure but it resembles that of other.  I need to add a 3rd WAP for a small room.  I was going to use an other cisco 1040 air, but I don't know where to start.  There is a smaller, lighter WAP that works?  I have no experience in network configuration, so I'd like something simple.  Help, please.

    Thank you

    Laura

    Hello Laura

    My name is Eric Moyers, one of the Experts I wireless in the Small Business Support Center.

    Normally, I tell customer to add products similar to their outgoing network when they're trying to develop it. This prevents the learning curves to a minimum and help in getting enlargement and running faster. However, there are time going with brand new products are better, especially if you are trying to integrate the best technologies.

    The Aironet 1040 currently being End of Life / end of sale. You would need to look for a different model.

    He stay with the Enterprise Access Points level, the AIR 1602 has the same capabilitoes as the 104 you're too used. Price range is 300 above low 400 according to one where you look.

    If you want to look at small businesses, we have the WAP561 which is also dual Radio and should do everything the 1040 can or you can look at the WAP371 that is double also but includes a radio that can make the new signal "AC". These two serve 200 upper middle 200 depending on where you look. By the way that they look almost identical to the AIR1040 as well.

    I hope this can help you started, please let me know if I can answer anythin else or go deeper.

    Eric Moyers
    .:|:.:|:. CISCO | Eric Moyers | Cisco technical support |
    Wireless and monitoring subject matter Expert

    Please note useful messages and let others know when your Question has been answered

    You can click on my name next to the image if you want to email me directly

Maybe you are looking for

  • Space available USB keys

    Hi, I have a few (FAT32) USB key that I use as backups. I delete the files to send it to the trash, but when I try to use the system says there is not enough space. There is no indication in the Finder, but when I looked on the stick in a PC it showe

  • How to update BIOS for Portege 7200

    Is someone out there to have a procedure to update the bios of a Portege 7200CT without the docking station. Toshiba posted a procedure in its newsletter, but it does not explain how to do the update without the docking station. As everyone knows tha

  • Preferred networks

    I have trouble getting the preferred networks to stay in the current networks of security that I selected. I deleted the ones I use most, but they keep coming back. This creates the black hole directly in my iMac, networks, and systems. For example,

  • Can't get any DMG

    I tried opening/editing dmg different files from different sources and I still get the message: The following disk images could not be opened Reason for no mountable file system I also tried to open a different account and I get the same result, but

  • Windows 7 Home Premium Wifi grey symbol with a star yellow but fully connected to the internet.

    Windows 7 Home Premium Wifi grey symbol with a star yellow but fully connected to the internet. Have been able to fix it by uninstalling the driver wireless and re - install, but when the system is restarted it then returns to the same problem.  Trie