Small business SF300 waterfall

Similar Questions

• Accounting on a Cisco Small Business SF300-08

  Hello

  "Cisco Small Business 300 Series managed switches Administration Guide" and the sheet indicate that this switch can make requests of accounting with a Radius server. On the switch interface/CLI SF300, there is that the authentication port, the port of account cannot be resolved (and nothing is sent by the switch to the default port). I guess that the SF300-08 doesn't manage accounting. Maybe I need to change to another model. Could you give me another model in the same price range?

  Thank you

  Laurent.

  Hi Laurent, I am pleased that the 1.2.5.70 has solved this problem.

  Please keep Advisory of the 1.2.5.70 firmware has also been lifted for now.

  Please note that we have identified a potential problem with the 1.2.5.70 update for the series 200, 300 and 500 switches. As a precaution, we took down the 1.2.5.70 free while we determine the cause of the issue, the seriousness and the scope. We re - ask the release or publish an updated based on the results of our analysis.

• How dumb you down a small business SF300 until a transparent bridge?

  I use the Cisco SF302 switches as a connection to wireless devices that will be the link between the two buildings.

  In this configuration: Cisco 3570 in building 1 > Cisco SF302 > 1 wireless bridge construction > construction 2 Wireless Bridge > Cisco SF302 > Cisco 3560 in building 2.

  It seems that by default the SF302 are not acting as bridges, transparent and just leave all my 802. 1 q through traffic.

  How dumb them down for that all 802. 1 q traffic is treated by the 3570 and 3560 with just SF302 acting under the bridge let my 802. 1 q to cross safely?

  Thank you.

  By default, VLANs are not automatically added to trunk ports. You must create them and assign them to the trunk ports. This has been done for security reasons.

• Problems with config Small Business switch

  Hi, I know that if I read the documentation I will come for answers, but I'd really like some input from someone with more knowledge than me. I have a problem with Cisco SF300, one of the Small Business switches. I have a single interface on my router and I need to separate my internal networks, I thought that one way would be to use VLANs. On my two internal networks a network has D-Link unmanaged switches, the other has the Cisco SF300 I did as follows.

  On the Cisco Switch, all of the default ports for ports of junction. I changed FE1-FE24 and GE1-2 to access ports.

  Created two VLAN and placed FE1-FE24 in VLAN10 (also my management VLAN), GE3 is a trunk Port for unidentified VLAN20, VLAN 20 uplinks to my DiLink switches. This way my unmanaged switches traffic arrives on a trunk on VLAN20 untagged port.

  GE4 is a trunk port and I assigned to VLAN1 untagged, tag VLAN10 VLAN20 tag and. 10 of VLANS and VLAN 20 then to my router.

  The plan was to connect GE4 to my router, but I had two things happen that I can't explain.

  All first as soon as I connected my D-Link to GE3 LAN on VLAN20 came down, I couldn't ping servers from computers etc, all devices are connected to the D-links unmanaged. Secondly, the responsibilities of VLAN changed on GE3 GE4, VLAN 10 and 20 disappeared and only the VLAN by default was assigned, also under settings VLAN my state of interface VLAN for VLAN20 shows people with reduced mobility. One of my FE12 continues also to change VLAN access ports.

  Can anyone offer any suggestions as to what might have crushed the LAN and why change my VLAN. I wrote my config running at startup configuration incidentally.

  I added two screenshots.

  Seriously, I'd appreciate the help.

  Thank you

  Bob

  Hi Bob,

  Could you please post a topology? I can help with this, but it would be much easier that I could see your network.

  Thanks in advance,

  Garrett

• T200v server with Windows Small Business SERVER 2003

  Just ordered a server TS200v, can I install Windows Small Business SERVER 2003 on this server, or do I have to upgrade to Windows SBS 2008?

  Hello

  SBS2003 is not officially supported, I think that 2008 alone is. You can try but might be a problem with some drivers.

  J.

• Windows Small Business Server 2011 - "windows setup cannot continue because a required driver could not be installed.

  Hello

  I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:

  Windows Setup cannot continue because a required driver could not be installed

  I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• Windows Small Business Server 2011 Standard access to download

  Hello

  I need to access a copy of the Small Business Server 2011 Standard edition since the MSDN site, in order to help one of my clients.

  They have SBS 2011 standard installed on their network and I'm going to make some big changes to their network. To do this I need to access the installation (file ISO DVD) on MSDN disc. They have the product key, but not the original disks that were used to install SBS 2011 Std.

  Thank you for your help.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• CRM using SQL database in an environment of small business often inaccessible with the following error message

  Hello

  This is my first time on this forum so bear with my ignorance!  I'll expose the background of my setup and then explain the error.

  We have a small business with a server running SBS2011 and PC running Windows 8 and 8.1 connected to the server in a domain environment.

  We use a CRM product called Emu Tall that uses SQL Server 2008 R2 on the server for the database and the PC run a local application that connects to this database.

  On a daily basis, but completely randomly and sometimes several times a day, a user will try and open the application on a PC and get the following error message.

  Could not load file or assembly 'Microsoft.SqlServer.SqlEnum, Version = 10.0.0.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies. The system cannot find the specified file.

  At first, I thought it must be a matter of waiting time as it seemed to happen every morning, but I've proved since that it occurs at any time of the day and is apparently unrelated to amount of users or idle time or something like that.

  Here's another oddity that hopefully sheds some light on it. If I go to the server and open the CRM application on the server, it works very well since it is only the PC that have the connection problem.  In addition, as soon as I connected to the server of any PC can connect immediately (until it happens again later in the day).  I don't need to stay connected to the server, connect one time and close the session and he "fixed" it for a few hours for all PC users.

  I contacted the CRM vendor, and they are completely confused and have no idea what to do.

  We are trolling along at the moment with me opening a session on the server for launch launch whenever a user receives the error message but it is far from satisfactory.

  A final observation is that it does not always.  It used to work fine.  The problem began just two months ago and seems to coincide with the increase in our user from 5 to 12 users license even if the CRM provider swear that it is nothing to do with the license.  They may agree; I don't know enough to argue the point.

  Any help will be appreciated! I'm sure it will be a simple solution and someone there will know why and the answer immediately but is elusive at this time.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Backups fail on Small Business Server 2008

  We have a Small Business Server 2008 which has only backup, with the following error;

  Backup started on October 3, 2014 10:30:07 'failed with following error code ' 2155348010' (one of the backup files could not be created.). Please rerun backup once the problem is resolved.

  We reformatted the drive, it works fine, but not the backup server to it.

  Anyone has any ideas what might be causing the problem?

  SCS

  SBS is outside the jurisdiction of sites.  Questions for this should be asked on Technet

  http://social.technet.Microsoft.com/forums/en-us/home

• best configuration for Small Business Server

  I'm looking for advice on HW and SW recommendations for a small business.  We have 15 users, 20 computers and 3 printers.  I currently have a single Windows Server 2008.  I want to run a domain controller main for all users, file sharing, print server, possibly Windows Update Center and eventually MS Exchange.  I am trying to decide the best configuration of HW with a fairly cheap budget.   I currently have 1 I7 based server with 4 GB of Ram, several IBM servers, P4 306 m (I have 4 +), and a lot of hard drives (all in a half rack).  I also need a decent backup system.

  Can anyone recommend the best configuration of HW player and hard?  Should I analyze server roles?  With respect to the SW, I'm a non-profit and use Windows Server 2008 (at a discount)

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Must I pay monthly to use free images of rights to a small business Web site?

  Must I pay monthly to use free images of rights to a small business Web site?

  Hello

  Answers is a technical support site of journal peer for Windows and a few other Microsoft
  products. Answers has absolutely nothing to do with the question of whether or not you have to pay
  anyone, even Microsoft, service fees for the use of the images or anything else. If you need
  to raise this point with some company, and the site offers images.

  Sorry, we cannot be more helpful.

  Rob - SpiritX

• blue screen error in windows server 2003 small business, failure of page in non paged area

  error on a blue screen in windows 2003 small business server, fault_ page_ zone not paged_

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• outgoing faxes of Small business server 2008 does not

  I have a Wnidows Small Business Server 2008 running in 64-bit. I have 2 US Robotics modems attached to the server with the fax server role installation. Can receive faxes on both machines, I'm unable to send faxes on one or the other. Spoke about this problem at U.S. Robotics and did all the troub; e SHOOTING they asked and their answer is maybe to try to reinstall the Fax Server service. It seems resonable? If I do what are the procedures that I must take inorder to completely remove the Fax Server Service in order to get a clean reinstall of it? Thanks in advance for your help.

  Hello

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to Windows Server - Domain (VPN) and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  LC

• Small Business Server 2011 hangs on 'Apply the settings of the computer' at startup

  Small Business Server 2011 hangs on "Applying computer settings" on startup and can only start in safe mode

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/SBS/gg985359

  Hope this information helps.