Need to reboot my laptop each time to get a sound.

Similar Questions

• W3C id duplicate. Do I really need to start from scratch each time?

  I just ran validation and I got a bunch of warnings on "duplicate id" (id duplicate). You can see my page being built HERE. I would like to repeat the same box on once again, but with different content/info. Do I really need to start from scratch each time?

  Thank you!

  Use find & replace in your source code to change your #ID for a re-usable. class.

  From: #divName

  to: .divName

  From:

  TO:

  Nancy O.

• My laptop is operating completely normally and would never shut down on its own. __But when I try to play a game or during the plauing sometime example pes 2010 or need for speed, my laptop some time Shut down.

  My laptop Qosmio F50 works completely normally and would never shut down on its own.
  But I try to play a game pes 2010 example or the need for speed, my laptop long closed.
  It was good before, but after rebotting my computer this problem just recently started...
  I have Nvidia Geforce, DirectX 10 and all recommended Requirments for the games but sometimes I start a game or after 2 or 3 housr game it would be completely Shut Down My computer and when I would turn on the computer, he would say that it was not Shut Down normally.

  Alhajji,
  They suggested to do a factory restore, if a valid step to do.  I know this isn't the most fun thing to do, but if you restore the system failing factory (clean install of the operating system).  Then, run Windows update and update drivers.  At this point, you can install a game and test.  If the problem persists, it would look to be a possible hardware problem with the system.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vostro 460 found network card Code 31 need to reboot 3 to 4 times

  I have 10 Vostro 460 s, network cards themselves not at startup.  You must restart the systems 3 - 4 times to get Windows to find network cards.  All the drivers are up to date.  This may be related to a Windows update, because the machine were very good for a month or two until an update is released.

  We have the same problem.  3 of the 11 Vostro 460 lack of NIC I totally agree with jason629. Call Dell for a new MB or get a new network card. I spent hours and hours to try to update the bios/driver, restart, unplug, reset MB, shaking. I ended up getting new network cards.

  Disappointed. Quailty of Dell is downhill.

• Need to click on "Accept" each time than send file via BT mobile phone

  It's not much of a problem, but rather a need.

  It takes forever and it is quite annoying to sit near the computer, then click on "Accept" for each photo sent via my mobile phone.

  Is it possible to accept the connection for some time, or perhaps to pair devices so that the PC requires no authentication?

  Hmmm. This option is not known to me, but if you find a setting that would allow a file multiple shipment without click always accept, please share it with me

• Need to install the tools each time I run Fusion

  I'm under Fusion v2.0.2.  The guest operating system is Windows XP Home Edition.  The computer is a macbook pro (early 2007).  Every time I launch the merger, I need to re-install VMWare tools by going to the menu bar, clicking on 'Virtual Machine' and select "install VMWare Tools".  Someone answered in another thread that should not need to install tools beyond the first time.  Any ideas on what is wrong with my setup?

  Thank you.

  Hi Anthony,.

  so your problem with tools is not one that has been fixed with this latest version of 2.0.2 (147997). However, I really wonder if you must install the tools of your virtual machine? Is not because the menu item "Install VMware Tools" in the menu 'Virtual Machine' is not disabled it means that you must install the tools of your virtual machine. In general, if VMware Tools are not up to date, once your virtual machine is running and launched, you should see the small blue icon with three cubes (symbol of Vmware) on the Windows taskbar, bottom right, flashing. In any case, to check if you really have an older version of tools, right click on the little blue icon in the Windows taskbar and open the Vmware Tools Properties dialog box. Select the 'About' tab (last one) and check the Version displayed. In particular, the build No. shown it should be the same as the build number Fusion (that you can get from VMWare Fusion menu "About VMware Fusion"). If these two values are identical, then there is no need upgrade VMware tools.

  I'll look into the other problem you mentioned on Boocamp VM works slowly.

  Thank you

  Laura

  -

• Recently, my laptop screen is too short and needs to adjust each time that I have turn it on, or change the site. Help, please?

  Screen on laptop needs the length by adjusting each time I have activate or change the site.  Can't see what the cause.

  Hi Maureen,

  Thank you for keeping us posted.

  I appreciate all your efforts really to try to solve this problem.

  To diagnose the issue in the new user account, I suggest you try to re-create the issue in the new user account and check if that helps.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  Security, privacy & accounts

  http://Windows.Microsoft.com/en-us/Windows/Security-Privacy-accounts-help#security-privacy-accounts-help=Windows-7&V0H=win8tab1&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  You can also try running SFC scan and check if this is useful.

                                   

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how run the tool (SFC.exe) System File Checkerto scan your system for files and to repair the system missing or corrupt files in Windows. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• E3200 needs reboot once a day - time for the client lease problem?

  It's annoying - I need to reboort my router every day to get an internet connection? I have a desktop computer and a laptop more iPads, etc. The laptop loses connectivity every day around the same time. So far, my only solution is to reboot the router. I realize that the client lease time is set to 1 day by default, but it is not supposed to ask the modem for another day of life, when this happens?

  I bought Linksys because of quality, but it's frustrating!

  Can anyone provide a recommendation?

  Thank you!

  Well, you are on a cable or DSL connection? I don't know that I'll just move forward and try to determine some tips for your router settings:

  1. you use E3200 which is a double router broadband. So I think you'll find these settings:

  

  I change the setting like QUACK says:

  For the 5 GHz channel parameters, you can do channel width to 20 MHz only and channel 40 or 161...

  For 2.4 GHz string parameters, you can make the channel width to channel 6, 9, 11 and 20 MHz only...

  Your iPad will only see the 2.4 GHz so that they connect to. If your laptop can see the two strips, they connect to any broadcast signal is the strongest. If you are interested in reading about the difference between 2.4 and 5 GHz, you can read it here.

  Can also apply you all the settings you change on the E3200 router your Wireless extender? It is important for computers/devices that are connected to your Extender gets the connection. The Wireless Extender usually extends the 2.4 GHz signal.

  Sorry for long post.

  Just tell me if this doesn't work, I'll try to think more help

• Need to re - enter the password each time [was: is it well possible?]

  I have 2 computers

  It is my office (windows 8), the other is a laptop (Mac)

  Whenever I update DW, I need to enter again all the passwords to enter the websites I had done.

  Each time, I hope that one day I will remember this before the update.

  Well, my question is:

  I have the password to upload files to the hosting in my office for a single site, but not on my laptop, and I don't see what it is.

  If I sync my desktop settings in the cloud, is that my password goes hand in hand with synchronization?

  Hope you understand and that you can help me out here.

  Thank you

  Subject line edited by moderator for clarity

  Using the options of synchronization for definitions of site does not work well if a computer is running Windows and the other is a Mac. The problem is that site definitions include the path to the local folder. Windows and Mac have totally different file structures, so everything is messed up (although passwords must be preserved).

  I found that the best approach is to deselect the option synchronize site definitions. When you first launch Dreamweaver after update, select Advanced Options and clear the options to synchronize the site definitions and keyboard shortcuts.

• Time Capsule needs frequent rebooting

  I have a Time Capsule (probably 4 years) running Version 6.3.5 (635,2) and in the last months, the wifi signal stops a few times a day.

  If I do a restart it fires and works very well, until the next time he needs a reboot.

  Thoughts?

  First thought would be that the expected lifetime of the time Capsule is about 3 years old, and that a steady loss of WiFi connection, requiring a reboot is a common sign of a an internal power supply, which has already started to head South.

  If you could provide the model number of your Time Capsule... it starts with an 'A' followed by four digits... we could have some more bits of information to tell you about the possibility or feasibility of repair.

• How you stay connected on my accounts on sites like reddit and gmail? I changed my settings to allow cookies, but I still need to login each time.

  How you stay connected on my accounts on sites like reddit and gmail? I changed my settings to allow cookies, but I still need to login each time.

  Websites to remember you and automatically log you in are stored in a cookie.

  • Create a cookie exception permit to keep such cookies, especially for sites Web secure and if the cookies expire when Firefox is closed.
  • Tools > Options > privacy > Cookies: Exceptions

  In case you use "clear history of Firefox closing:

  • do not delete Cookies
  • do not delete Site preferences
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception to allow.

• Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  There is a Microsoft Knowledge base article which sets up a few steps to perform in the computer in order to solve the problem you are experiencing, read the article that you find on the link I am mentioning below and see if it helps the measures mentioned:

  http://support.Microsoft.com/kb/919751

• After updating Vista, no display on startup. You need to restart each time you start.

  Hello

  My pc worked fine months ago, but after an update to Vista, all of a sudden it started not to display what whether at start-up.

  Monitor work, Vista loads, because I can hear the opening melody of the speakers.

  But there is no display, I have a black screen. LCD monitor remains in stand by mode.

  To solve the problem, I need to restart the computer and go to guarantee the mode every time...

  After pressing the restart button, the monitor opens normally, I choose the secure mode, if I did not have Vista isn't black, again leaving the screen.

  After choosing safe mode, drivers and loading files and when I see the screen of the user, I restart Vista.

  That everything becomes normal... Vista starts normally.

  I've updated my ATI driver but nothing has changed.

  How can I resolve this display problem? To open my pc and be able to see my office properly, I need to restart twice each time you start...

  Try this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And for Windows Update issues:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I created an admin password, but when I restart my computer, I can connect without password and I need to create a new admin password each time

  I created an admin password, but when I restart my computer, I can connect without password and I need to create a new admin password each time

  Open a high command prompt, and then type these commands:

  NET user "user %%nom" | more

  (to check when you change changed your password)

  NET user "user %%nom" 123456

  (to change your password to 123456)

  Now, restart Windows and check if the problem persists.

• Need to restart each time to use creative cloud

  Every time. I studied the problem, tried to install, uninstall, chanting, shouting curses... nothing works.

  Currently, when I click on the icon in my finder bar and select Apps, I get a blue spinning wheel, forever. The parties who want to sell me MORE things seem to work well. The things I paid for and want to work with, not so much.

  At other times, I have a list of applications, but when I click on one, nothing happens, forever.

  If I try to install a new application, it expected 0% forever. Even if I try to delete one.

  If, on the other hand, I restart my computer, it works. I can open, close, install and remove (and boy, I'm tempted to just delete all...).

  This is not NORMAL. Properly written software shouldn't require a restart each time, to run it.

  I went through and killed all the processes loosely related to Adobe running on my computer, and then tried to run CC, nothing helps. What he either dies only when I reboot. I tried the cleaning CC tool. I uninstalled and then reinstalled.

  I'll save the angry rants for later. Someone at - it something constructive to offer?

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html