How instaill of recovery on hard drive during the recovery process

Similar Questions

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products

• How do I know which hard drive contains the operating system in the Hp Pavilion dv7-4069wm? The upgrade.

  I think the upgrade of one of my hard drives (ea 320) in my HP Pavilion laptop dv7-4069wm for more storage.  I like to keep the drive that contains the operating system to avoid the hassle to make a copy, but I'm not sure which one that is. I have not replaced a hard drive before, and still less a double disc. Recently, I added more RAM and noticed that both hard drives looked the same. Can someone tell me how to know the difference?

  Hello

  Drive main HARD with the operating system is shown in the diagram at Page 49 of your maintenance & Service Guide.

  Kind regards

  DP - K

• How can I access a hard drive on the hp Pavilion 17 e160us

  Does anyone know how to access memory and hard drive on HP Pavilion 17 e160us?

  Hello

  Hard drive page 49, memory module 54,

  http://h10032.www1.HP.com/CTG/manual/c04069163.PDF

• Satellite A200 - 26J PSAE6E: No. HARD drive during the installation of XP

  Hay @ all. My name is ahmet.

  I'm from the Germany. I have a problem.

  I bought a toshiba laptop and I think it's a very good laptop.
  But I don't like Vista. It uses to much space, much grafic and a lot more.
  So I tried to install my old windows XP Professional sp2. Here's the problem:

  During installation, Xp procres say there is no hard drive.
  Hmm, I thought I should have a look on other forums. There, they said to integrate a sata driver on the xp cd.
  But I don't understand the using nLite to use.

  Could you show me how I had to reinstall my old XP?
  I have a lot of files to my laptop and I change some settings in Vista so that I could not use internet.
  If I want to reinstall vista with the recovery cd, it would remove all folders, photo ect.
  I use only my other old computer.

  I would be very happy if you could help me.
  Thank you very much!!! If you have an answer I would be too happy

  my system:

  Toshiba - Satellite A200-26J

  Modell Nr.
  PSAE6E-0F000HGR

  Technology

  Hello

  The nLite is a freeware program that helps you to integrate the SATA (Intel matrix Storage Manager) driver in the original XP operating system.

  If you want to know how to use nLite software, then glasses a bit.
  There are many websites that explain how to use nLite.

  (Driver SATA) Intel Storage Manager can be downloaded from the Toshiba driver page.

  Last month, I created a new XP CD using the nLite.
  I've included a few pilots, SP2 and some patches it of really not very difficult.

  As I said... Scope of protection is a key ;)

  Good bye

• Satellite A200 PSAE6E: no HARD drive during the installation of XP

  Hi Vandeven,

  I have the same laptop that you are, but I have difficulty to get Windows XP to recognize the hard drive.
  It keep saying there is no hard drive detected.

  I don't have a floppy drive either.

  Is there another way to install Windows XP without the SATA Driver?
  My bios is 2.10 and I can switch to a different bios it wont let me. Keep saying bad Bios!. But isn't.

  Please help as I am sick and I tried Windows Vista...
  Programs slow and inconsistent.

  Thank you much in advance.

  Why you n t use the forum advanced search option and search for similar topics?

  Installing driver SATA doesn't concern only the A200 series.
  On most new notebook Series SATA, driver installation is necessary.

  In any case if you want to use the search option, then you would find this Toshiba document:

  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Welcome them

• XP Pro - unable to detect the hard drive during the upgrade

  Hello

  I was trying to add a second IDE hard drive to my PC, after the installation of the system tells me not hard are detected. Press FI to try again. F2 to set up. I did both, but the drive still not detected and the system could not start.

  I try to install back my original drive (a drive), but the problem persists.

  Can I know how to fix this?

  It can because of the IDE Hard Drive cable?

  Thank you

  Low

  It is not at all what you did (for example, why do you of the re - install your original disc).  However, if what you were doing was to connect the new drive to the middle connector on the cable and then disconnect it, maybe all what you did was disconnect the cable at the end of the motherboard.

  Yes, your problem may be a faulty IDE cable... but that seems unlikely given that it worked before... unless you damaged the cable while you were trying to connect the second drive.

  Look carefully at the end of the motherboard of the cable and make sure it is properly connected, do not offset by a PIN or two and - if you had unplugged, that you do not bend the pins when you reconnect it.

• How can I put a hard drive of the laptop into a desktop computer?

  I have a HP Pavilion 5000 ZV who died some time ago, and the hard drive is always good. It's 60 GB running Windows Xp. there I got the laptop from a friend because they did not want. Also I have a desktop IBM Aptivia since 1998 and it has a huge 8 GB HDD running windows 98. I want to put the laptop drive in the desktop and take out the old one. I would buy a new hard drive, but it's Microsoft Office 2003 pro. This is the only copy I have and I did re install the product key. I need this computer for my workshop. How to operate? Is there a part I need? If Yes, where can I get a?

  If I understand correctly, you have a laptop HP Pavilion ZV 5000 which doesn't work but has a 60 GB HDD that has installed Windows XP and Office 2003 is also installed.

  You want to put the laptop hard drive in an old desk.

  You have two problems: hardware and software.

  Hardware issues can probably be solved easily (you would need something like this $10--> http://tinyurl.com/d539pwf kit - but read the comments).

  The problem of software is that you can not take an existing installation of Windows XP and completely change the hardware.  If you try, you will need to do a reinstall of Windows before it will work.

  If you have a generic OEM XP install CD, you may be able to do a repair installation (save applications - for example Office 2003), but the CD must be at a same or later version of XP (Home, Pro) and Service Pack level as the version of XP that is installed.  You must also have the product key that is associated with the OEM install CD (I think that the key to the label on the HP will fail).

  More likely, you will need to do a clean install, which will involve formatting the drive.

  If you have the Office 2003 installation CD, you can retrieve its installation key from the drive of the laptop before installing it in the office.  Probably the best way to do this is to put the laptop in a hard drive enclosure external drive, which attach to a working computer and use of Magical Jelly Bean Keyfinder using his function to "Load hive".

• How to disable the driver during the boot process?

  Hello

  I have uninstall a printer from my computer, but when I restart my computer during the process sometimes a back pop up windows and require a response at the prompt of the printer driver I uninstall, but this statement was not disabled or deleted.

  How can I access the startup file to change?

  Thank you

  Hi Reyes,

  Restart your computer and start pressing on the keys on your keyboard. On a computer that is configured to start to multiple operating systems, you can press on the -key when the Boot Menu appears. On the Advanced Boot Options menu, select Disable the Driver Signature Enforcement press .

  

  This will disable the drivers at startup.

  Hope the helps of information provided.

• No visible hard drive during the installation of Windows 8 during the transmission phase of gathering primary.

  Hello

  I recently bought an Alienware m18X R2, and I wanted to install windows 8 (new installation) on this subject. I go through the ordinary procedure and boot from disk or during the time to choose the main drive for the installation. None of the drives are visible (error. no driver drive drive-impossible to find discs), this is the same error that occurred when I resorted to a regular update. Kindly advice. I have 2 drive HARD 500 GB in RAID 0, and a 64 GB SSD to set caching.

  Rémy

  What you need is the driver of TSRI Intel (see below).

  downloadcenter.intel.com/Detail_Desc.aspx

• Satellite Pro U300: Cannot see the HARD drive during the installation of XP

  Due to the restrictions of the network must downgrade the operating system on a new satellite Pro U300. I am unable to run the XP + sp2 cd as it says there is no hard drive installed on the machine. I guess it's because I need 3 scsi drivers or third-party raid.

  Does anyone have these or know a place where I can get my hands on them? Or am I completely off the mark that you have another solution?

  Hello

  You need the Intel Matrix Storage Management utility for the management of your local storage, including the RAID support.

  On the European driver Toshiba page I found Robson tea for Vista package which includes the Intel Matrix Storage Management utility.

  The same can be downloaded from the Intel page for the XP operating system.

  I found this on the page of Intel:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  Something similar is described here in this thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749

  Good luck buddy

• Satellite U500 - where to get a new HARD drive during the warranty?

  Hello world

  I bought my Toshiba Satellite U500 some months in London, and a few days ago my hard drive starts to give me a such difficulties that do not correctly read and given the weird sounds. And finally at boot up to yesterday, its giving me this message "Pri Master hard disk: extended S.M.A.R.T. Status BAD, Backup and replace, press F1 for cont...» »

  Now, I realized that I need a new HD and that one is not usable. What I was wondering, is it possible to keep in touch no matter what service provider Toshiba in order to get the new HD cos this machine is almost brand NEW.

  Can someone give me an advice what to please, it would be much appreciated.

  Thank you

  Hi Edward_4,

  I agree with you. You need a new HARD drive as soon as possible because it s not recommendable to record data on a failed HARD drive.

  In any case, it should t be a problem. You must contact an authorized service provider and explain the situation. Technicians can order a new HARD drive for you and Exchange. This should be free, because your laptop is under warranty so it s age of a few months.

  On the Toshiba site is a list of all s ASP. This seems to be your interlocutor ;)
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• How can I wipe old hard drive from the laptop of computer death without jeopardizing the new laptop?

  I got a laptop HP who died - apparently the motherboard is bad.  I have to return the laptop to HP for replacement.  I bought equipment to connect the old hard drive to my new laptop via a USB cable and have recovered files that I need, but I want to erase the old drive hard until I got back.

  There seems to be a lot of variation in the hard drive, programs wiping, and I was wondering if someone could point me to one that could fit here.  I am concerned about the running software on my work to access the old hard drive and accidentally damage my portable hard drive to work laptop.  Who is?

  Thanks for the tips.

  Hi Jenny_812,

  You should be able to as long you are sure to pick the right drive for formatting.  See the following article:

  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  I hope this helps!

• How to share a second hard drive with the residential group / network?

  Initially, I posted this to the security and privacy but we told him it should be under the sons of the network.  Here's hoping someone can help.

  I have a desktop computer and a laptop both running W7 Home Professional 64 bit.  On the desktop, I have 2 hard drives - C has programs, D has the data.  On the laptop, I'm just a hard drive.

  Each machine can see the other time under residential group and network.  From the Office I can access files that are on the laptop but I can't do the reverse.

  The laptop can see the desktop drive D and all folders that I shared, but when I try to dig into a folder I get a message saying I don't have permission to access the folder.  In this case, if I try to access using either homegroup or the network.

  On the desktop, when I look at the properties of the D drive it shows as a shared network drive.  Individual records within D show shared with permissions of read/write with anyone and/or homegroup.

  What did I do wrong (or failed to do) to allow me to access the files on the disk D of desktop from the laptop?

  Hello

  Step 1: Try to run the troubleshooter of shared folders and check.
  Reference: http://windows.microsoft.com/en-us/windows7/Share-files-with-someone

  Step 2: Try to give permissions to specific user through which you are trying to access these files or folders.
  Reference: http://technet.microsoft.com/en-us/library/bb727008.aspx

  Step 3: You can also try the advanced sharing and check.

  See the article provided in step 1 and the bottom of the article.

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials#section_3

  You can also try the advanced sharing and check.

  Access to files and printers on other homegroup computers
  http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite A200-1QZ: No. HARD drive during the installation of XP

  HIII,

  I have a problem!
  I have my laptop (satellite A200-1QZ) buythis for everyday, it is with Windows Vista: (((I don't like it!

  I download driver xp for any material!
  I would like to install Win XP SP2 cd boot but it's error message, when I access the installation,< harddisk="" can't="" found="">>!

  I think that the mistake is on the SATA - HARDDISK? orrrr

  Please help me: p
  and happy new year...

  You must install the Intel Matrix Storage Manager first.

  This issue has been described many times here in the forum.

  I would really recommend to use the advanced search option forum, if you need details ;)

  Best regards and happy new year friend