How is it OS install (c.) has less GB of data (D ;) on my laptop

Similar Questions

• How to install DSO with less than 4 G (Oracle 12 c)

  What installation ASM for Oracle 12 c, one of the pre-requisites runInstaller is a RAM of 4 GB.

  How to make a DSO installation with less than 4 GB?

  Thank you and best regards.

  Slim wrote:

  According to my knowledge, you cannot change the value requirements of memory. The oracle gave the minimum memory required to install in the installation manual.

  You may receive this warning on the screen of prior checking. You can choose to ignore this warning. There will be no problem in it.

  How can you say "there is no problem in it.  It is a pre-required for a reason.  Yes, history has shown that, in some cases, some pre-reqs can meaningfully be ignored during installation.  But it is irresponsible to tell someone that they can just blithely ignore the warnings and "there is no problem."

• I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  Do you still have the MBP? If so you can manually copy and paste the files you need.

  If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.

• Norton Security Scan has been deleted accidentally by one of my roommates, how can I re - install on my computer?

  Norton Security Scan has been deleted accidentally by one of my roommates, how can I re - install on my computer?

  The same way you did before.

  Well said. Alternatively, you could install an anti-virus that doesn't suck (my opinion) such as Microsoft Security Essentials (free), AVG free, etc.

• How to determine if an exe has been installed?

  Gurus:

  I have Windows 7 and Norton-Anti-anti-virus/firewall.

  I came across a strange pop-up message when I logged in to my computer today. A pop-up window, said that "do you want to install \SYSWOW\MAClean.exe (not sure the path or the name of the exe)? While I was doing research on it using another computer, he disappeared. What is one-sided, I don't think any exe with MA*.exe in the computer. My computer also seems to be suspended during indexing - it connects normally - no delay - if I remove the wireless connection. other times, he connects very well, even with the wireless connection is ON.

  My questions are:-

  (1) how to determine if an exe has been installed ("I see not all facilities in uninstall it or change of program" window in the control panel)?

  (2) is it possible to list out all messages 'Alerts' or 'Popup' that appears on the screen?

  Best regards

  San

  HI San,

  Thanks for posting your question on the Forum of the Microsoft community.

  This can happen if the corresponding .exe file is associated with a program that is installed on your computer. To check the instance of the file, you can check in the list of programs and features in Control Panel. Apart from this, it can be due to an infection by the virus.

  To know different alerts and notifications, you can open the Action Center in Windows and check important notifications or the needs of Windows to accomplish tasks. To do this, please refer to the following location: Start > Control Panel (see: large icons) > Action Center.

  Also, you can also check error messages in the event viewer for more information.

  (Click Start, type Event Viewer in the Start Search and press ENTER.)

  To check the program third party or service by giving pop-ups/alerts, you can start the computer in a selective startup with no third-party software in operation. This process is known as a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  In addition, if your computer hangs or crashes often, I suggest you to try the steps from the following link.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286/en-us

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information is useful. Please post for any further assistance.

• How do I re - install my Photoshop CS3?  My drive hard iMac packed in and has been replaced, the upgrade of the 10.6.3 to 10.10.5 system.  My DVD player now look briefly at my Photoshop CS3 disk and ejects then.  How can I I re - install?

  How do I re - install my Photoshop CS3?

  My drive hard iMac packed in and has been replaced, the upgrade of the 10.6.3 to 10.10.5 system.

  My DVD player now look briefly at my Photoshop CS3 disk and ejects then.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo

  The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo

  Hello

  In order to download Adobe Photoshop, you need to download the desktop app creative cloud first.

  You can please apps download Adobe Creative Cloud | Adobe Creative Cloud free trial

  After downloading the desktop application, you can download photoshop through it.

  Kind regards

  Sandrine

• How to: Use Smart install wireless install your Laserjet on Windows 7

  Some HP Laserjet printers have Smart Install. This allows you quickly connect the printer USB cable and start the installation. In this way a CD or a CD player is not necessary to install your device. Once the installation program appears you can proceed through the installation. The following video demonstrates how to use Smart Install to install your laserjet on a wireless network.

  Smart Install of Windows 7 - HP LaserJet P1102w wireless

  I hope that the information and the video above helps. If anyone has a problem or has any questions, feel free to ask. I'm more than happy to help.

• How to check if your x230t has a backlit keyboard?

  How to check if your x230t has a backlit keyboard?

  Hello

  When I bought my x230t, the seller said that the model of backlit keyboard. but now when I press the "FN + SPACE key" nothing happens. I installed all the drivers (I think). So I wanted to ask you if you still pilots or any other software for the keyboard backlit to work?

  And how do I check if my model has a backlit keyboard?

  Best regards, Tastro

  
  

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• How to download and install outlook express for free

  How to download and install outlook express for free

  You do not have. OE has never been a stand-alone email client. You are asking this in a XP forum. You have XP? If you do, you have Outlook Express. If you are using XP, what is your problem with OE?

  If you do not OE, maybe this will help.

  Right click on the desktop | New | Shortcut. Go to the * c:\program files\outlook express\msimn.exe *. Click next | Click Finish.  It will be a new shortcut on the desktop.

• How to determine if my PC has a Bluetooth function

  Past review windows help.

  Original title - how to determine if my PC has a Bluetooth facility? __Si a, is possible to download the software to connect to my laptop? *

  Bluetooth is more than simple software - it is a hardware device that communicates with bluetooth devices.  Software alone won't do the trick.

  Go to start / Control Panel / Device Manager and see if there is no list for a bluetooth device driver.  If this isn't the case, you probably have no bluetooth.  The best way to check is to contact the manufacturer of the computer and provide them with your serial number and have them check your system to see if bluetooth is installed.  Also, if you have there is probably an icon of Bluetooth configuration in the Control Panel-, but it can be a separate program or included in other categories.  Otherwise, you need both a bluetooth compatible device with your computer and your version of Vista (and appropriate software, firmware or drivers) - more you need set up and configure - and all that is required by the mobile to establish a bluetooth connection.  Here is an article that covers in detail: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-Bluetooth-enabled-device.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to download or install Adobe CS2 I bought using a serial number

  How to download or install Adobe CS2 I bought using a serial number

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  NOTE that CS2 will not install on a Mac "modern", and when you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select Windows XP compatibility in the popup of option

• I subscribe to creative photography Cloud CC2014, which including Photoshop and Lightroom. How many device can install CC2014

  I am a subscriber of photography CC2014, how many devices can install the software?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• How many computers can install Creative Suite CS5.5?

  Hello

  My family has Adobe Creative Site CS5.5. We have three computers and installed it on 2 of the 3. I was wondering how computers can I install it on.

  In addition, one of the computers are broken. Is there a way I could deactivate the license for this computer only?

  Thank you!

  Post edited by: sushicrazy

  Hi Sushicrazy,

  You can install Adobe software on any number of computers but can activate on 2 computers only, which limits the use of the Adobe software on 2 computers but you can disable the software on a single computer and activate the 3rd machine and can continue the program that will allow to use the application on computer 3 but deactivation and activation need made.

  Thank you

  Manish