Similar Questions

• How do you decommssion a domain controller that has not been on the network of more than 200 days?

  Hello

  in our society, we have an old domain controller has been disconnected for more than 200 days, probably in a State of thumbstone, it still appears in our network. We wanted to know what is the best way of disused this server, we connect to our network and do normal downgrade process.

  How do you decommssion a domain controller that has not been on the network of more than 200 days?

  Could you please write me back to my work email or call me on my work phone? Job information are below.

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• message comes up saying "message has not been downloaded" when you try to read messages that have been read many times before

  Trying to open the "view all images" of an e-mail he suddenly flashed up "message has not been downloaded. I read the post before but not asked to show images.

  Hi FinYo,

  What mail client do you use? Outlook, Windows Live Mail?
  You can try to take a look at the following articles for Outlook:
  http://support.Microsoft.com/kb/843018
  http://Office.Microsoft.com/en-us/Outlook-help/turn-off-blocking-automatic-picture-downloads-HP007310739.aspx
  For Windows Live questions please visit these links:

  Windows Live Mail

  Windows Live Hotmail

  Hope these helps.

• Suggestions on how to update Microsoft Updates when a computer has not been upadted in one year

  have a laptop with Vista on it. The laptop has not been updated (it has been used) in almost a year. I know that there must be a TON of updates it needs Microsoft.

  Another concern that the amount of updates that will be found will crush the computer. How can I update in a safe and less massive way?

  I thought to download all the updates, but simply install a little at a time.

  But I think that the amount of download will be as overwhelming

  Repost

  check marks beside the updates you want to install.

  "If it ain't broke, don't fix it." 90% of the edits, even those labeled as 'critical' no effect not me. I don't use Outlook for e-mail, I do not use Windows Live Mail, is not a server, it is not a media center, is not a game platform, etc., etc.

  I had long climbed out of the car "must always be updated software" long, particularly when it comes to and because of Microsoft updates.

• Received notification that my computer has not been configured to run IPv6. How to activate it?

  original title: help with IPv6

  I received a notification from yahoo that my computer has not been configured to run IPv6 properly and that this IPv4 will not be available much longer, so I need to update in order to continue to access the internet. Is this a correct information? I'm under edition family vista with service Pack 2 and the system is about 3 years old. I installed an update within the last few months. If I need to update microsoft will release updates or will it be found elsewhere? Thank you

  Laura

  Hello

  Don't worry, IPv4 will be here for many years to come.

  In any case, IPv6 on Vista is not a simple matter, it can be used by it takes a while to set up.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=ce286032-4DF0-4D53-A21e-1590e9280fef

  Win 7 is IPv6 ready out of the box.

• How can I find out what programs has not been used for awhile so I can remove from Control Panel

  Original title: Control Panel

  How can I find out what programs has not been used for awhile so I can remove from Control Panel

  It is removed, it's just in your own knowledge and memory.  If you know that you have not used and don't want that, then you can delete it.  It's entirely your choice

• I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell desktop inspiron one 19

  I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell inspiron one 19 desktop... your help will be very appreciated thanks in advance!

  Here are the usual methods to solve this problem:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).
  • Check your paper files (works only if you threw down the password somewhere)

  If none of these standard precautions work for you, then the remedy will be painful. Post again if this is the case.

• I have problem install photoshop5.5 and 6.0 software upgraded. The software, check error error message a future version of photoshop or ImageReady qualification has not been detected.   Please try again or cancel the installation if you have valid c

  I have problem install photoshop5.5 and 6.0 software upgraded. The software, future error message

  Error checking version of photoshop or ImageReady qualification has not been detected.   Please try again or cancel the installation if you have a valid copy of photoshop or ImReady that was detected.   Please call Adobe Customer Service.    . Someone help me please

  Phillip winter

  If I'm just remember, you need to enter your serial number of photoshop 5.5 when you install the upgrade photoshop version 6.

  The number that is on the upgrade to photoshop registration card 6 does not work for the installation of an update to photoshop version 6.

• The EI program has not been downloaded withincreative-cloud, how can I do?

  The EI program has not been downloaded clouds withincreative how can I do

  The EI program has not been downloaded withincreative-cloud, how can I do?

  

• Firefox has not been started. I downloaded a new. the icon is crossed out. How can I fix?

  March 25, 2011
  I'm on a Mac OS X (power pc)
  After rebooting my computer today. Firefox has not been started. I clicked on the icon, it has begun to initiate and then stopped before that something happened.

  To try to solve the problem, I trashed the application and downloaded a new. He gave me a message: "the Firefox application cannot be launched-10661."

  I retried the download and the second time, the Firefox application icon has been crossed out. It's a circle with a bar slash on it. Same message arrives.

  Sorry, Firefox 4 is not available for Mac PowerPC. You can re - install the previous version from here:
  http://www.Firefox.com/all-older.html

  Or you can find a non-official version of Firefox 4 for PowerPC here: http://www.floodgap.com/software/tenfourfox/

• How to uninstall microsoft no product which has not been installed good product is intunemp3 (error windows cannot install acsess)

  I downloaded intunemp3 to get music, but it did not work properly so I tried to uninstall the product and all I get is (error windows cannot install acsess, this can happen if the installation program has not been installed correctly) and as it happened I met other problems which I think may be related to the first problem. When I use my system tools to defragment files, it only that Flash and never starts, when I try to download windows updates they fail.even when I try to run a security scan the sas error McAfee has encountered a problem please click Home and try again. can any body out there help me out?

  Thank you

  Donald

  Try to do a system restore: click on start, all programs, accessories, System Tools, System Restore.  Then choose the restore point from when itunes tried to install.  If this does not work, let me know and I can give you another way to do it.

• WMP12 has not been closed properly. How do you prevent disabling my plugins?

  I found this description of the error:

  C00D0FD6: Damaged or incompatible plug-ins
  Windows Media Player has not been closed properly. A damaged or incompatible plug-in could have caused the problem to occur. As a precaution, the optional plug-ins have been disabled.

  The question: is it possible to disable this feature or on the occasion of some plugins like not optional ?

  I found a way by program. Before you start WMP, make sure all the registry keys under HKCU\Software\Microsoft\MediaPlayer\Health are deleted. That will tell the WMP on the next boot he was properly arrested even if it wasn't.

• Failed to load error programs: aushelper.dll has not been installed, and I have to re - install

  Original title: How can I reinstall the "aushelper.dll? The computer tells me that I have to, but I don't know how.

  I have an Acer laptop, given to me as a gift. All was well until after receiving a message that a virus was blocked, twice, then I realized that my wifi signal only had limited access to the network. Also several programs, including my anti virus programs load saying that aushelper.dll has not been installed and I should reinstall it.  Fine by me, but how?

  donazq

  You use AVG PC TuneUp?

  If so, try to uninstall AVG PC TuneUp and reinstall it.

• "Notification Dll has not been registered, program will not work correctly.

  Dell Inspiron 2200 windows configuration error "Notification dll has not been registered, program will not work correctly.

  I checked several sites to try to fix this error without success. I have uninstalled, reinstalled, tried an older driver.

  go into system and con +, with no luck at the moment. Ksperov is installed where an antivirus trying something here now, doubt it will work. I noticed that many people have had this error, but I have seen almost nothing that corrected the error?

  With all the Dell laptops out there, someone has fixed it now. Also I tried to record a certain dll with no luck.

  I can't find a dll that is labeld notification.dll?

  The wireless works, but it is worsening.

  Thanks, Bruce

  Hey Brucefl,

  Try to restart in a clean boot to see if this error message is caused by a third-party program/startup process. To do this, follow the steps in this troubleshooting guide:
  How to configure Windows XP to start in a "clean boot" State

  If the restart in a clean boot prevents the problem to appear, take a look at the list of programs and services (do not forget to check her hide all Microsoft services box on the Services tab) tab of msconfig. Try disabling the programs and services to see if you can isolate what programs and services is causing this error message to occur.

  Hope that helps, I look forward to hearing from you.

• I need to clean the registry because it has not been done in a long time.

  I need to clean the registry because it has not been done in a long time.  I can't find any software cleaner that cleans all teasers just identify errors and clean up maybe 3 things, but you need to buy to do it all.

  What can I do?

  Do not.  He didn't need it and even if you deleted 1000 things from him (doubtful) it would make little or no impact on performance.

  If you don't understand the registry enough to know what to erase manually or how to add things yourself, etc. - using a tool that almost arbitrarily find the things that are supposed to be orphaned or not necessary and confidence (for some reason any) can lead to a system of death.

  If you just * have to * ("it's a moral imperative") and then use that integrated with CCleaner.  I generally recommend not even consider using its registry "cleaning" component - but in the many times I used to analyze and find things and go through them manually before I remove them (at least - I've seen ~ 250 entries, he suggested to get rid of and even in this case, my manual check led me to delete all and there was no adverse) I didn't it go wrong.  If you * MUST * do it, use it and save your changes, so you might be able to roll back.  Before do you all - make sure your backups are in order.

  Want generally cleaning XP and maybe actually get a performance gain?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.