Satellite A500-19U - need help for games and the AC adapter / CC

Similar Questions

• Satellite A500-19U freezes everything in game and connected AC adapter

  I have a problem crazy gusy & I hope to have the soulition here :)

  When I run games like COD4, Batman. & more games very well his work so that I didn't connect my AC adapter / CC

  When I play when I connect to the AC adapter the game freezes after 3-5 min... & I need to CTRL + ALT + DEL or restart the laptop

  I have the Toshiba Satellite A500-19U... & I use the original Ac adapter... &:(, j'ai acheté mon tour quelques mois il y a)

  SRY for my bad English: $

  Hey, man. It's really strange sounds. they use what leverage plan? Try to select high performance and check if it works. To be honest, I have no idea.

  welcome them

• I need help for activation of the real administrator account.

  I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

  I need help for that.

  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• Satellite A500-1GL - power of Windows 7 and the games options

  Hi all

  Some know maybe my previous posts about my problem with the fan on my Satellite A500-1GL worry when I'm online game. It is disturbing to hit the 90%. And his pass even with the update of the BIOS and Toshiba now advise to do a factory restore then fails to send in for repair.
  Looking at the power options,

  I was wondering if someone could recommend this power options I should consider and it would have made no difference for the wise game fan (secondlife seems to be the main problem with the fan turn the crank to the top)

  Any help would be appreciated, trying to think of something that might help which may be a simple solution to this problem of fan
  Torti :)

  Hello

  To be honest, a lot of activity of fan during the games would be normal I think because games need a lot of CPU and GPU power, they always run at a very high level. This means a lot of heat will occur and it must be cooled to avoid damage.

  Of more if I have the games, it s not important how the fan noise creates because I hear music or dialogue game Isn t it so? ;)

  In any case, from time to time it s advisable to clean the cooling system of your laptop using a jet of compressed air:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  And for games, you can use high power option or balanced Windows Performance.

• need help for where and how to search for apps you want in windows store 8

  I just bought a SAMSUNG ATIV TAB 3 (XE300TZC), it has WINDOWS 8.  I went to the store Windows on my windows 8 to start the download of all my apps that I like and I found some of the apps and downloaded. But many of the apps I want to I don't think because I've noticed that it is not an option or small box for me to be able to get all the apps... I guess my question is how a search for specific applications on my STORE of WINDOWS 8?

  Hi Brandi,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  Please see suggestions from HairyFool said on June 4, 2013 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/how-do-i-search-the-Windows-apps-store-on-my/75390438-4DBA-4a77-93cd-aa3b2153efce

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• need help for import and synchronization

  I need assistance with importing files in lightroom.  I don't like the way that LR seems to import my images and I must be something wrong or does not switch to something or other.

  Let's say I have a main folder called example 20091208 birds.  It has 45 pictures in.  Then I have a subfolder that I created when you export 2 images I've made a few changes for.  It would be called conversions.  The record with 45 images inside are RAW images.  The two images of the subfolder are PSD files.

  When I import the main folder so that the subfolder, LR includes 2 images of the subfolder in the main folder too to increase the number in this case by two to show 47.  According to me, he did it wrong or by mistake and import should show the main folder with 45 images and the subfolder with the 2 images that I exported.  What happens here?  Thanks for your help!  It is much appreciated.

  Look at the topic library > Photos include subfolders. You can pass if necessary power on and off.

  John

• Need help for testing and practice the concepts of the server at home

  Original title: Hello team

  I need assistance with testing and to practice the concepts of the server at home... I don't have an option to test laboratory pls suggest possible ways that I can practice... need help... Please help

  Hi Sachinadi,

  You can ask your question in the MSDN Forums: http://msdn.microsoft.com/en-us/hh361695.aspx

  Thank you.

• Satellite Pro 4200 - need help for Windows 95 & drivers!

  Hello! Years ago my mother, I bought a fully functional, great Toshiba Satellite Pro 4200 working the place taken sales... Since that day, my laptop has not been used. But now, I found a few games nostalgic childhood of mine, who works only with Windows 95. I wanted to play, and I decided to install Windows 95 to my laptop. The installation process went well, it was a bit complicated at first because of the startup disk and such. But I managed to install a working fully Windows 95 in my laptop! But it gives me only 16 colors and no option to choose the resolution! So I found out that I need to install the video card drivers.

  I have google a bit and discovered that my laptop has chart S3 Savage IX. I failed to find the appropriate drivers for it. Until I went to your site to support canada and traveled for a pilot of similar laptops. I found Windows 95-98 compatible drivers for my card. The installation process was easy, is well past and fine! I then could choose 256 colors and another resolution (which I did not actually change...). I changed the colors and then restarted. Everything went well until windows 95 logo screen came suddenly to the top and after that I only saw colors and black borders. He did not start Windows properly. What can be wrong? At I have download the wrong drivers? Windows told me 2 different versions, IX and MX. I tried them both. Tried to change the Hz also, but nothing helped. Please help me!

  Thanks in advance,
  Jupstejuho of Finland.

  P.S Sorry for my bad English...

  Edit: OH, BTW is the exact version of my OS: Microsoft Windows 95 Finnish b with USB support (I Don t know the version very very accurate actually... but I just mention that it is version B of the operating system.) Could this be the problem? I also tried the same driver downloaded from toshiba europe Web site, but it won't let me just install the drivers 'already installed' and they really are. I did not uninstall them, I tried to run the uninstall utility, but it doesn't work...!

  Post edited by: jupstejuho

  Hello!

  Maybe chose a resolution not supported?
  This happens to you at all resolutions, or only one?

  Normally, you can download all the drivers on the European site of Toshiba, but I only find Satellite Pro 4220, 4240 and so far but not 4200.

  However, have you tried to do a BIOS update?
  Before installing the graphics driver, you need to update the version of DirectX.
  You can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• Satellite A200-1AE - need drivers for Toshiba and Flash card buttons

  Hello!!

  I have a problem.
  I changed Windows on my laptop from Vista to Windows 7.

  I searched on the home page and I did not find the drivers for card Flasch and FrontPanel, is not lit :(

  Pls help me!

  Hello

  Toshiba multimedia keys are controlled by VAP (value added package).
  The VAP is model independent, the VAP for Satellite L500 should work also on Sat A200
  So download the PPV for Satellite L500 and check how it works on your A200

  A question:
  What do you mean by Flasch card?
  Do you mean the FN keys or the card reader?

  The FN keys are controller by utility Support Flash Card which can be downloaded also on Satellite L500 driver area

  Check it!

• Satellite C855-2CF - need help for install Windows 7

  Hello world!

  I bought a TOSHIBA Satellite C855-2CF *(PSKCAE-09K006HU).
  There's no OS installed previously. I want to install a Win 7, but so far without success.

  I found that some subjects, who said I should do in the BIOS and switch to the CMS UEFI boot, and another which said I have to disable secure boot, but I can't find these options in the BIOS.

  Where can I find them? Or is there something I should do more / before I access the BIOS?

  Thanks in advance for your support!

  vissza2

  Please read this:

  [BIOS configuration changes are necessary, if booting from external devices is required (Genuine Windows 8 units) | http://aps2.toshiba-tro.de/kb0/TSB2B03F30002R01.htm]

  Your comments would be appreciated.

• Need help for WRT160N and Vista

  You don't know if there is still a problem, but that's.

  I have Time Warner cable internet and a router WRT160N connected to my desktop on the 2nd floor, all right, download speed is great, near 740 kb/s most of the time.

  I have a laptop running Vista about 75' away and on the 1st floor. The signal strength is very good, most of the time bars 4. Problem is that the download speed is around 20 to 35 kb/s most of the time if I download anything on the computer directly connected or not.

  This is my wifes computer and she had to take the Vista operating system. I still use XP.

  My question is... is there some switch or command I have to on Vista to achieve best download speed. Or should I say forget the wireless and ethernet cable to the laptop.

  Thank you... Bob

  You can make this change on your wireless router, this will solve your problem and you will get the speed good download on your wireless laptop.

  Open an Internet Explorer browser page. In the address bar type - 192.168.1.1 leave name empty username & password for admin to use lower-case... or the wireless settings, follow these steps: -.
  Click on the tab - Wireless

  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the standard channel at 11-2, 462 GHz...

  - And wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and not letters) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network.

  Click Advanced Wireless-
  settings > change the tag to 75 interval > change the Fragmentation...
  Threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• I need help for C & C The First Decade * Urgent *.

  Hey guys, I have problems with my game. It is not compatible as others, my problem is that I can't run TFD without having the game CD in the disc drive. Any help would be appreciated much: D. Oh and by the way, my laptop specs are:

  Laptop: HP Pavilion dv6000
  Operating system: Windows 7 Ultimate Service Pack 1
  Processor: Intel core 2 Duo CPU T 5750 2.00GHz @ 2.00 GHz
  System type: 32-bit operating system
  Graphics card: I have no idea

  This is due to the protection against piracy (cd check) that the editor has put in place. You could check if there is an update removes that requirement but I doubt, that there is.

• need help for W7 to the downgrading to XP - graphic!

  Hello

  follow-up guide to CherylG of downgrading from W7 to XP and got to the point where everything works well, there is just one very annoying problem: I can't get the resolution of my screen that I need!

  Hardware: HP G72-150EF, model VY077EA #ABF.

  Video: ATI Mobility Radeon HD5430 (512 MB)

  Now under XP SP3.

  Tried all possible drivers I could find, works fine, max definable screen resolution is 1152 x 864, while I need 1600 x 900, which gives a not so nice result.

  Any suggestions?

  THX

  Stefan

  Edit Moderator: removed serial number

  Hello again,

  kept on looking at the same time and came across this one: AMD CQ42, tried and guess what? THIS MARKET!

  I am so happy now ;-)))

  Greetz

  Stefan

• Need help on expdp and the size of the database.

  Hi all
  
  I ran a command expdp
  expdp NOLOGFILE ESTIMATE_ONLY = Y Y =.
  
  Here is the output I got.
  
  
  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
  . estimated 'SCOTT '. "' MS_DATA_STORE ' 539.1 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_FULL_03 ' 488 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_FULL_04 ' 432 MB
  . estimated 'SCOTT '. "' URL_URL ' 267 MB
  . estimated 'SCOTT '. "' MS_BUFFER_TRACK ' 203 MB
  . estimated 'SCOTT '. "" NCS_ADAPTER_TABLE_OUT "168 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_19 ' 102 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_11 ' 100 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_12 ' 100 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_13 ' 100 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_14 ' 100 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_15 ' 100 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_16 ' 100 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_20 ' 100 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_21 ' 100 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_22 ' 100 MB
  . estimated 'SCOTT '. ' SYS_EXPORT_SCHEMA_18 '99 MB.
  . estimated 'SCOTT '. ' SYS_EXPORT_SCHEMA_09 '98 MB.
  . estimated 'SCOTT '. "' SYS_EXPORT_FULL_05 ' 95 MB
  . estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_17 ' 95 MB
  . estimated 'SCOTT '. "" SYS_EXPORT_SCHEMA_01 ' 92 MB
  
  
  I had read that, SYS_EXPORT_SCHEMA_XX are created while taking the dump with expdp and if stop you it without a showdown at work, this kind of remains of tables in the DB.
  
  I CAN DELETE THESE TABLES, BECAUSE IT IS TOO MUCH SPACE. ???
  
  Thank you
  Nitin

  Oracle will create master tables in the format you mentioned taking the export using expdp
  You can drop them and nothing will happen even if the database is running.

  Please mark as correct and answered so this can help...

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn