How many things

Similar Questions

• How many things should run at startup

  "How many programs is supposed to be running, max at startup" I read in a report from tech somewhere there must be between 15 and 75. I have 98.

  I think it might make my CPU sometimes running at 98%.  How do I know which files I can close?

  Or even a single application slows down my system?  I have McAffee, Spybot, AdAware and Norton on my computer. Is this wrong?

  Numbers like that are meaningless. There is no 'max', and there isn't any 'should '.

  Despite what many people say to you, you should be concerned, not withhow * much * of these programs you run, but * that *. Some of them can seriously affect the performance, but others have no effect on performance.

  Don't stop all programs to run willy-nilly. You should have to determine what each program is that its value is for you and what the performance cost is running all the time. You can getmore to information on these to http://www.processlibrary.com/. If you don't find it there, try the research and ask questions about the details here.

  Once you have this information, you can make a smart informed decision on what you want to keep and what you want to get rid of.

  But you're talking about programs or processes? 98 is an enormousnumber, if you talk about programs. But even for the process, there is no max.

  Another response of the community of Windows XP newsgroups

• Is there a way to tell how many objects (paths) I chose?

  Is there an easy way to tell how the paths I have selected in Illustrator CS4?

  I have a lot of small sections on the artboard, I want to assure you that I have enough for what I need and I don't want to hand count of hundreds of them to be sure... are at - it a reading somewhere in the interface user of Illustrator that will tell me how many things I chose?

  Go to window > Document Info, in the drop down menu on the side right ensure selection only and objects are checked. If the lines (and only the lines you want to count) are selected, the number of lines will appear next to paths in the palette.

• "you met a serious error, serious errors can be caused by many things including the virus... "How can I solve this problem

  Hello United team, I installed recently the 'command and conquer zero hour', but when I open it this error pops up "you have experienced a serious error, serious errors can be caused by many things including the virus..." "How can I solve this problem

  "You met [a] serious error...". "It would be interesting to know what software gave this message. The game? Windows? Unlikely, I've ever seen a strange warning like this. Is it followed by a Board, what to do next? -I'm asking this because many "rogue AV" programs use similar messages to push users to install their "security solutions" = malware that contains and spreads viruses, he warns against.

• I used 'Customize Firefox' to change toolbars show, and now the Firefox Customize, tab keeps appearing no matter how many times I close.

  The window customize Firefox and tab guard popping open at seemingly random times. This continues to be no matter how many times I close.

  One possible reason is that if it was added as a second 'Home tab' in which case it will be displayed in each new window (Ctrl + n) and every time that you click the Home button.

  To verify that you can use the page Options, as described in this article: start-up, homepage, tabs and download settings.

  Look for a vertical bar character at the heart of the area that separates the two addresses. A simple example with short URLS:

  https://www.mozilla.org/|about:customizing
  

  The bar certainly can be hard to spot with long URLs, but when you find it, delete everything to the right of the bar, then the bar itself (I suggest to remove the last bar so things don't accidentally get it together).

  Was she?

• Is the monitor of imagery needed on the taskbar if you do not print? How many...

  I have checked old solutions here and do not have quite the same issue, I would like to ask.

  I have the Solution Center on the old pc with XP. Works well, thank you, and several resources always help the XP'. I also have a HP with 8. How many resources it takes and don't forget that it is a netbook pc which tend to be more slow start. All I could eliminate might help.

  My question is on the XP that monitor must be loaded every time if you do not plan to print? Could not be loaded just before the solution center if that was the program that I run?  Thank you very much!

  'Jack :-{D '.

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  Hi @jnepoore,

  Now, I'm not 100% certain, but I'm sure that the digital imaging monitor is not necessary. However it helps maintain a constant communication between the printer and the software. Take a look at what I found:

  Posted by rnfolsom

  Picardjc wrote that "Digital imaging monitor is part of the HP software that communicates with your HP printer. This program allows to read the ink levels, get an out of paper message, scan from the device to the computer and so on. Its not necessary, but it will limit the use of printers if you delete. "Understood. But for my printer HP Officejet Pro 8000 A809a, what is the purpose of having the digital imaging monitor icon in the taskbar Windows7 sp1 of the Notification area (aka system tray)? My A809a is NOT an all-in-one that includes a scanner; It is simply a very good printer. When I start to print something, if you need ink or paper, that information is displayed on the screen of my computer. So I ask again: why is the icon of monitor digital imaging on the taskbar? I clicked on at the time of this icon (I not print anything, but as usual, the printer is turned on), and nothing happened. R.N. (Roger) Folsom
  

  P.S., Below I'll post some other discussions (with links to their locations) of the digital imaging monitor, I discovered before finding this site on which I am writing. There are a variety of opinions on what makes the digital imaging monitor. HP Digital Imaging Monitor is for HP director system tray access. This is necessary if you want to use the buttons of all-in-one on a HP printer all in one to scan documents or transfer photos from a camera manually. Closing the icon monitor HP digital imaging in the Windows system tray can cause the HP all-in-one to lose part of its scanning features and not the connection error message. In this case, you can restore all functionality by restarting the computer or by starting the HP digital imaging monitor. SOURCE: Yahoo http://answers.yahoo.com/question/index?qid=20080115093754AAlajpq
  

  Re: WITHDRAWAL HP Digital Imaging Monitor Systray? [Edited] 03/08/2011 14:05 - edited? 03/08/2011 14:08 Yes, it is safe to remove. In my view, it is usually in the program group under start / all programs / startup. Simply navigate under the Start button, right-click on it and delete! If it is not there, then remove it from the registry: run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and delete it from the list in the right pane. If she is not there, then try hkey_current_user\\software\\microsoft\\windows\\currentversion\\run it's better than using msconfig and uncheck it. In my opinion, msconfig must always be set to Normal startup. Your printer will always print without that annoying obstructive utility called Digital Imaging Monitor. Ciao! Casey Henderson, MCP SOURCE: http://h30434.www3.hp.com/t5/Web-Printing-Software/REMOVING-HP-Digital-Imaging-Monitor-from-Systray/...

  I know that the information is specific to Windows 7, but the bottom line is, no, there is no need to run all the time. Registry keys are significantly different for XP as they are for Windows 7 while blurb does not apply. I just copied the post in its entirety for you to read through.

  Another thing to consider is uninstall the software and then download and install the base driver.

  Please let me know if this is useful, or if you have any other questions. I'm happy to do my best to help.

• Satellite 3000 - x 4: this model has how many memory slots?

  Hello

  I have a question on this model of Toshiba Satellite 3000 - x 4 PS301E - 000 K 8 - EN I took the chassis on this model today to do a repair for someone in my family work. When I took the VGA card, I discovered what looked like an another memory location.
  So my question is how many slots memory model there?

  I read online and I checked the profile page and they all point to this model with two memory locations.
  If this is the case then what is this thing that resembled a memory slot under the vga card?
  I had to buy another piece of RAM for this model today make three, but I decided on a little hand to check it out first.

  There are already two sticks of laptop memory already, 512 MB, and 128 MB. This model can take up to 1 GB.
  So, what do you think is there memory locations two or three on this model?

  Thank you

  Hello

  As far as I know, this unit has 2 memory slots and 1 slot for PC card for 2 Type II cards or 1 Type III card.
  Please also see this Toshiba product site:
  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=UK&ACTION=PRIN T_WITH_BACK & PRODUCT_ID = 15932 & DISC_MODEL = 0

• SxS Pro + and AXSM cards | How many times can be re-writings?

  It would be interesting to know how many times it is save to use the same SxS Pro + and cards AXSM for productions? The two are quite expensive and should last a while. How many times can I use the same cards and remove it, the Formate and re - write them? Is there a deadline or expiration date?

  Peterculter wrote:

  When registered at full capacity once a day, SxS Pro cards + can continue to be used for about five years.

  What is the same thing for AXSM?

  See you soon.

• How many problems Windows has?

  How many problems microsoft windows there so far, including all versions and office? Address in thousands of billions, billions?

  Each product has the potential for bugs, such as Windows, so I'm not trying to make excuses here, just to put things in perspective.

  However, when something does not work, or if you get an error message it does not necessarily that it's Windows which is the cause (although it could be). Windows operating systems must interact with so many combinations of hardware, drivers, applications, and devices, the problem may reside with any of them (or a combination of them). It's just that the Windows operating system is where the user sees the error/problem for a lot of people usually assume that Windows is the cause.

  Updates and service packs are planned for a number of reasons, such as:

  -improved stability;

  -fixed the vulnerabilities that have been discovered;

  -Add new features.

  Types of similar arguments apply to the office.

  As for how many problems there are, I have no idea and I don't worry about this - just keep your system through Windows Update.

• Unable to install KB2570947 of ideas? I've tried many things, but it keeps failing...

  cannot install update KB2570947 of ideas? I've tried many things, but it keeps failing...

  Hi stewartmcgregor,

  1. You receive an error message when the update installs?
  2. You are able to install some other updates on the computer?
  3. Did you the latest changes on the computer?
  4. You have security software installed on the computer?

  Method 1

  I suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If the previous step fails then I would suggest that you manually download and install the update on the computer.

  Update security for Windows XP (KB2570947)

  http://www.Microsoft.com/download/en/details.aspx?ID=27307

  Method 3

  If the previous step fails then check the history of update to know the error message associated with the failure of the update and post back with the details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

• How many programmers does MICROSOFT need to change a light bulb?

  Q: how many programmers MICROSOFT need to change a light bulb?

  A: NO!  -C' is a HARDWARE problem!  HA HA, sorry, guys, just a little humor here... Thank as a consumer of microsoft and a defender of the years, we have these forums where so much information and so many knowledgeable people can come together to work on the different problems that can meet the end users... My thanks to you all who, like me, take the time out of your hectic, busy lives to donate to be used to help others who struggle in our rapid and changing cyber-community expansion... Well done!     THANK YOU ALL!

  There is a lot of questions... The easiest to get in the world thing is a bad answer!

  Q: how many programmers MACINTOSH should to change a light bulb?

  A: NO!  THEY just declare DARKNESS the new STANDARD!

  There is a lot of questions... The easiest to get in the world thing is a bad answer!

• How many days will I can consume 5 GB internet charge

  I get a lot of my mobile company, internet charge 5 GB, I don't know how to quantify this. examples how can I download movies, listening to TV and radio stations line how many hours? things like that.

  Thank you

  Hello EdwinDollete,

  It really depends on the movie that you download. Some movies are about 700-800 MB in length (some may be larger). Based on these figures you would handle around 6 movies for the month (assuming that 800 MB per movie (6 x 800 4 800 MB (4.8 GB)).

  You will also need to take into account updates for your operating system. For example Windows generally update once a month or more (at least that there is an update of emergency). Just a normal download of updates can easily take up to 500 MB or even 1 GB depending on what needs to be updated.

  Software download, can also run in several MB. For example (an extreme, obviously) a complete copy of the Windows operating system, for example, may be 2.5 to 3.75 GB in size.

  You will find that sometimes you will use probably more than 5 GB, other times less. Most ISPS charge extra when you go over the 5 GB limit.

  Unlimited access is rather more expensive, in the long term, it is by far the best package.

  These links may be useful: http://www.evdoinfo.com/content/view/846/63/

  http://www.uSwitch.com/broadband/guides/what_is_download_allowance_/

  http://www.ehow.com/info_12193149_much-can-online-5-gigabyte-limit.html

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How many processes should normally turn my vista computer?

  Original title: vista-based computer

  How many processes should normally run my vista computer.

  How many processes should normally run my vista computer.

  There is no overall normal - normal only for * you * and * your * system.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• RE Blu - ray discs. How many times can I burn?

  Hi, I recently bought a blu - ray burner and a couple of BD - RE discs, I was wondering how many times I can burn and erase then burn again then delete again (you get the point)? I ask this because Iv read you can do upwards then 1000 times on other sites that I read 10 times max then it begins to freeze and other things.

  My disks are BD - RE 25 gb single layer memorex

  Thank you

  Hello Stef K,.

  Thank you for your message.  Yes, Memorex is a good quality disc.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How many times do I need to do a system repair disk?

  I recently discovered the features to create a system repair disc and an image of the system.

  I think I should create a new image system after installing, for example, some Windows updates.  Yes?

  But how many times I have to create a repair update disc?

  You really need a cd of WinPE recovery or a second to school although flash player is always a good thing that I always do one of each.

  Do the basics with an image utility reliable free system on a completely separate hard disk,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Macrium-reflect-by-Britec/349cfe40-3481-4F90-a20c-43c9815a2d3b