How max cpu soul?

It is therefore logic that SOUL would not be max on my cpu so its supposed to render in the background - but is it possible I can say SOUL to use all the resources available on a rendering?  currently when I send files to create soul so that it uses only 20 to 50% of cpu, how can I increase to 100%?  For comparrison, if I directly in first I get the same 20 to 50% but in AE if I turn comp - it will use 60 to 85% of cpu and other programs like xilisoft video converter if I convert 1 video it uses 60-70% of cpu.  I tried unsuccessfully to things: 1. project of rendering that is located on an SSD for another 2 SSD. stop all other adobe programs when the SOUL is rendered.

The preparation of x264pro body/SOUL, I came across this bottleneck - IE not seeing 100% cpu load.

Then... I did a test - I made a dummy encoder that has simply dropped the gross framework uncompressed on the floor (not even on the disc). This test showed how fast the SOUL/PProHeadless can make executives. He isn't - where nearly 100% loadon all hearts on a quad or higher computer base. This is why there are bottlenecks. My test used a static synthetic video image so that removed the HDD delay equation since there was no source of the disk images. The delay is the treatment within the SOUL.

The reality is that SOUL via direct file or PProHeadless is relatively slow to create the raw frames uncompressed by hand out of the encoder. (They are called internally exporters).

If the exporter is a compression method that is hard on the cpu (eg h.264) it will engulf all UC remains possible. So you'll see 100% on all processors.

If the exporter has been successfully written, in parallel with the compression (IE "encoding"), SOUL/body creates (ie the "rendering") the next image using a 1 or more processor cores.

If the export is a compression method complex at a time where he finished encoding surrounding, SOUL/body will have already finished the following uncompressed image. It's a good thing because there is no waste of time since compression engulfed the cpu when the following raw image was finished and Adobe sit around do nothing do.

On the other side of the...

If you are exporting with a simple compression method, for example, DV, MJPG, MPEG-Intra the exporter will have to twiddle their thumbs waiting for the next section. These are the moments you see all delays in the creation of the rendered raw uncompressed frame.

Yes, the hard drive speed and available memory to reduce delays in the manufacture of a raw image, but the reality is that, for some codecs, it is just not practical to make the raw image & encode using 100% potential CPU.

conclusion:

1: just because you're 100% on all processors does not mean that you are doing well. You may simply have a twisted [complex] encoder implementation.

2: you are not 100% does not mean that it is the hard drive or memory. It could be just the time required, the TEA needs to render an uncompressed image.

If #2 is your problem close to the bottom of the reason. For example, if you resize your output in SOUL of an imported file then resizing is done on processors. If you drop this file into a sequence of the same size and speed, export of the body to the SOUL waiting in line, you then the Mercury playback engine available. The EMT is 10 x faster to do the resizing vs a multi-core CPU. -Then... If you go to resize, putting this 'thing' in a sequence and queue it!

' hope that helps.

Tags: Adobe Media Encoder

Similar Questions

  • VM CPU MAX CPU & memory for a few vm in different vcenter

    Hi all

    I am a beginner inpowercli scripts, I try to get maximum CPU and the value of memory per day for 5 days, some how I managed to write a script in the way below but I don't get the desired result. Please help get the MAX & CPU AVG, the value of memory for the virtual machine that I mention in the input file.

    $vcenter = "VCS1', 'VCS2', 'VCS3.

    $usr = "_".

    $pwd = "_".

    Connect-VIServer-Server $vcenter - the username-password $pwd $usr

    $inputvm = get-Content - Path "C:\Input.txt".

    $vms = get - Vm $inputvm

    $start = (get-Date). AddDays(-5)

    $metrics = "cpu.usage.average", "mem.usage.average".

    $stats = get-Stat-entity $vms - start $start - Stat $metrics

    $stats | Group-object - property {$_.} Timestamp.Day}, {$_.} @entity.name} | %{

    $vmstat = "" | Select VmName, day, MemMax, MemAvg, CPUMax, CPUAvg

    $vmstat. VmName = $_. Values [1]

    $vmstat. Day = $_. Group [0]. Timestamp.Date

    $cpu = $_. Group | where {$_.} MetricId - eq "cpu.usage.average"} | Measure-object-property value - average - Maximum

    $mem = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average - Maximum

    $vmstat. CPUMax = [int] $cpu. Maximum

    $vmstat. CPUAvg = [int] $cpu. Average

    $vmstat. MemMax = [int] $mem. Maximum

    $vmstat. MemAvg = [int] $mem. Average

    $allvms += $vmstat

    }

    $allvms | Export-Csv "C:\Documents and Settings\user\Desktop\VMs.csv" - noTypeInformation

    -----------------------------------------------------------------------------------------------------------------------------------------------

    I get the result as below:

    Are you sure that there are no empty lines in the file?

    It is the only way that I can't reproduce your problem.

  • How / change CPU fan on T41 1.7 Ghz

    Hello

    In my IBM thinkpad T41 2373-4KU I need to change the CPU fan gets very loud. I found two types of fan to buy. How would I know if I need a long or other? Y at - it both compatible with my camera?
    I need documentation to disassemble my laptop? If so where I would have to find? I not found this information on the IBM/Lenovo website.

    Thks and greetings,
    Gromit1

    Welcome to the forum!

    Your machine needs a fan "short." All replacement instructions are in the HMM:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-46464

  • How much CPU for my VM?

    Hello


    I'm currently learning how use ESXI (free version) and I have created a basic server that is currently running a virtual (Windows 2008 R2) machine. I've seen some people say that you should only set the machine to use 1 CPU. I wonder if there is any disadvantage or reasoning behind it, that my machine is Dual Core I had to perfer using two cores, as we simply lose at the moment.

    The machine works really well. I initially installed Windows 2008 R2 with the 2CPU parameter and it was fine, but I updated 1cpu after reading some forums, I have not really noticed much of a difference however.

    If I use the two hearts, I can add another virtual machine at a point in the future it would be still a problem having the value 2 to the virtual computer using 2 CPU, devrais I then put them both to one of each?

    Thank you.

    Function of the CPU load, you might be able to get between 5 and 8 vCPUs by heart so would you be able to add an another VM in the future without problem.  Let your VM with just a single vCPU.  When you add an another VM also give him a single vCPU.  ESXi Resource Scheduler will ensure that your virtual machines CPU load is distributed between the physical hearts of your system more effectively.

  • How to start SOUL CS4 in English!

    Hey everybody!

    I use the German version of cs4. As I executed him AE in English, the AME

    has problems to make the project with expression inside.

    Please, let me know how I can start SOUL CS4 in English language!

    Thank you!

    Best,

    Alex

    Please, let me know how I can start SOUL CS4 in English language!

    No, you can't. Not without any reinstall, in any case. Even in this case, install being specific language, as soon as you enter your German serial number and install it on a German system, SOUL would be always installed in German. It can be simple. You can always restore your project in the SOUL, however. Simply select all the properties that have expressions and execute the Expression to keyframes keyframe assistant on the, and then save the project under a different name the version made only.

    Mylenium

  • Qosmio F20-155: what is max CPU temperature?

    Hi all

    Anyone know the maximum temperature of the processor for F20 - 155?
    The temperature that cannot be exceeded.

    Kind regards
    Akram

    Hello

    As far as I know this device was delivered with a CPU Intel-Pentium-M (Dothan) 770 2.13 GHz.
    I found this page that the maximum base Temperature is 100 degrees Celsius
    http://www.ThinkWiki.org/wiki/Intel_Pentium_M _ (Dothan) #Thermal_Specifications

    I think that the operating temperature should be around 60 C.
    Information on the Intel site, you should find:
    http://www.Intel.com/products/processor/PentiumM/index.htm

    But computers laptop Toshiba supports an overheating protection. If the temperature is too high and the temperature increases at critical level the notebook will automatically stop.

  • Host servers are max cpu

    Anyone able to help? a strange question. all 3 of my esxi servers 4 grow very high CPU usage. they normally run about 30 to 40% of nowhere they grow 80-90, they were for a few months. the only change I made was that I did an ip address change on my storage system to a private address 192.168.1.X, but that was yesterday. My vm running under the current CPU load there. any advise? It is production area so I don't know if I should restart or not...

    CPU usage increases when a system process requires more time or when several network packets are sent and received. The CPU becomes too busy when the CPU receives too many packets of the switch hardware or when a system process consumes too much time CPU. When one of these functions is using CPU resources, then it will be at the expense of the other, because the CPU is too busy.  For example, if the CPU gets number of packets due to a storm of broadcasting on the network, it is so busy processing all the packages that the other processes in the system do not have access to the resources of the processor.

    See the KB article below in case it may be useful for you.

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1077

  • vSphere Standard: comments Max CPU

    We have a host ESX 4.0 with a standard license.  It has 2 processors quad core in it.

    I have a 64-bit RedHat Enterprise 5 VM client and want to assign all 8 processors.  But when I start it I get an error "virtual machine has 8 virtual processors, but the host supports only 4.

    I imagine that it must be something license, but I couldn't find the limit of 4 vCPU in the doc https://www.vmware.com/products/vsphere/buy/editions_comparison.html comparison or pricing guide http://www.vmware.com/files/pdf/vsphere_pricing.pdf

    What Miss me?

    Thank you

    Only companies outside license allows vSMP 8 channels.  Others take on max 4 vCPU.

    -KjB

  • How max-width is interpreted by older browsers?

    There they see as simply 'width', or they ignore the statement entirely as if there was no width specified at all?

    Pre - IE7 ignores min and max width.

    Here is a hack for IE6

    http://www.seopher.com/articles/ie6_min_max_width_hack

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    http://ALT-Web.com/
    http://Twitter.com/ALTWEB

  • Portege compatibility and max CPU

    Hi, I just bought a Portege R100 and wonder if the accessories that I'm about to buy are compatible with it mainly to start the fine system.

    Drive DVD - ROM Toshiba PCMCIA Slimline external 8 x
    Model PA3246U-1DVD
    (did this start ok?)

    Toshiba USB floppy drive
    Model number PA3109U-1FDD
    (did this start ok?)

    Also my R100 is a 1 GHz processor, and I wonder what is the fastest processor, it can take, because I just saw a R100 with a 1.4 ghz pentium M processor.

    Thank you for your advanced information

    Sunny

    Hello

    Slimline external DVD ROM drive 8 x / 24 x with part number PA3246E-1DVD is compatible with your device. Normally to start, you need cable PCMCIA 16 bits, but I'm sure you can use the 32-bit PCMCIA cable delivered with slimline DVD-ROM.

    Floppy drive is no problem. You can buy this one.

  • Up to how many CPU sockets are taken in charge by the Technical Preview of Windows Server?

    I hope that all physical sockets server are detected so that all hearts are usable by the operating system.

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • hypervisor: how many cpu?

    Hello

    If I wanted to try the version of the hypervisor,

    It will be able to see the two processors on my server?

    Yes, the hypervisor is able to use several processors with multiple cores.

    André

  • Maxing out CPU with Google Image search, some other sites

    When I try to use Google Image search or load items of SBNation, the Firefox maxes CPU usage site and it stops responding during 10 seconds before it has loaded everything. It is a new problem that has arisen in recent weeks.

    I tried to disable all addons and plugins, deleting the cookies, clear cache, downgraded version beta at 23 and none seem to make no difference.

    Hello

    Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

    You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
    • In the Firefox options window, click the Advanced tab, and then select 'General '.
    • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    • Now restart Firefox and see if the problems persist.

    In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

    This solve your problems? Please report to us!

    Thank you.

  • How to compare CPU consumption between instances on the same host

    Hello

    We have an AIX server hosting 12 databases.
    I would like to get a glimpse of how the CPU is distributed among these 12 databases over a specific time period.

    Is it possible to show that in a chart using OEM? I have not found a way...
    I can see the CPU usage at the level of the host or the CPU per second for each individual database instance.
    But how do I make a valid comparison between instances of database?

    Is there another tool (UNIX level maybe) to do this in a simple way?


    Thanks in advance
    Frédéric

    http://applicationsdba.blogspot.in/2010/03/monitoring-CPU-usage-of-multiple-Oracle.html

  • Re: Satellite L640 - need to care about CPU upgrade

    The question is simple: what are the specifications/model max CPU can I update in this laptop? Find any information on this line is a nightmare because most places don't know anything about my part number. It is not European or American.

    I am in New Zealand. My exact part number is PSK0GA - 01 H 003. Satellite L640. Everything is stock factory parts aside from a new DC harness that is not totally related to that aside to show that I know what I'm doing when dismantling and replacement of parts in this laptop. I have no guarantee and am perfectly happy to do all the work and repairs on this myself at my own risk.

    So I was online looking for the plug exact motherboard of this machine so I can see what I can put in level and what I can't. But I have found nothing that comes close to give me all of the actual characteristics. Is someone can you please tell me where I can find this information? I am wanting to CPU RAM and (if possible) the graphic information about replaceable chips. An i7 would be nice if I can run into that, but I'm not going to buy one and try it if it won't work in this machine.

    Thanks for any help you can give.

    Simple question simple answer: Toshiba doesn't support CPU updates so you will not be able to find some official specs about it. Better place o check it's Toshiba service provider in your country.

    I mean, if anyone has any info on the equipment or upgrade Exchange and know-how is Toshiba service provider.
    Because of specific and complex design cooling systems, these upgrades are deprecated.

    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

Maybe you are looking for

  • Good aanhef, kan dat ook?

    In kun is of the programma I meet SMARTY codes een aanhef maken een hotelpersoneel mailing production, renewal:Beste {$Voornaam},DAT lukt niet in Mozilla, DOE ik het niet goed?

  • Why should I continue to put my password all the time

    MY account has been disabled and now it has been reset I keep having so far my iTunes any time e password why?

  • Printing problems with HP Photosmart C4599

    My printer prints not my new laptop Dell Studio (Vista 32-bit).  Not only have I tried to do everything from the manual and is support, there is still no solution.  I was on the phone at least 6 hours with 2 representatives and a representative of le

  • How to remove a hyperlink from a wordpad file?

    I have a file of registry entries that I want to save because I clicked on this file, which appeared on my desk, foolishly thinking that a file a .reg would open regedit.  I'm having some problems, and perhaps some/all of them come from after merged

  • Latitude E7270 with SSD NVMe clocked at 2 x.

    Hi all I have a Dell Latitude E7270 and updated the inside to a Samsung 950 Pro NVMe drive SSD. I installed Windows 10 on it and the performance is good, but I noticed something strange about that. When I run the software Samsung magician, he is dete