How movies I burn in nero 7 it will play on a dvd but computer games player

I used to use nero 6 reloaded and was not a problem, but my broken drive and had to start using nero 7 ultra and then my probs began

Foums of Nero are here: http://forum.my.nero.com/index.php?setlanguage=1&langid=en&showforum=2

Tags: Windows

Similar Questions

  • How can I burn a slideshow I made in Iphoto on a DVD?  I recorded on my desk and have a DVD player in my mac.

    How can I burn a slideshow I made in Iphoto on a DVD? I recorded it on my desk and it is in Iphoto.

    Export to the desktop then right click on the exported sequence and select burn to disc

    LN

  • QSI CDRW/DVD SBW-242 won't read DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

    Dell Inspiron5100 WinXP SP3.

    Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc.  I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.

    Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)

    Can't update anything of QSI as they were absorbed by COREL years.  No support available for WINDVD4

    When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:

    CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again.  Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work

    It WILL play CDs of music (mp3s)

    Found the following material etc.

    Provider: Microsoft Corp.

    File version: 5.1.2600.5512 (xpsp 080413-2108

    Driver date: 01/07/2001

    Driver version: 5.1.2535

    Driver files

    C\windows\system32\DRIVERS\cdrom.sys

    "" "" \DRIVERS\imapi.sys

    «"\DRIVERS\redbook.sys «»

    «"«\system32\ c:\windows\system32\storprop.dll»»»

    I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.

    FIXIT now brings me HERE

    It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs

    From: * e-mail address is removed from the privacy *.
    To: * e-mail address is removed from the privacy *.
    Date: Tuesday, May 17, 2011 08:30:29-0700
    Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

    Response

    Hello

    1. are you able to read any type of file .doc or .txt of DVD?

    After following all the steps (including the update of the MP9 for Media Player [MP] 11) below

    I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)

    on-screen MP11.  He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.

    2 , what exactly happens when you try to burn the CD? You get the error message?

    Not nothing... He's here

    3. How do you try to burn CDs?

    MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens

    4 have you tried to play the DVD content in ? windows media player

    I had not before, but now I have.  Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of ").  Now, go back and see 1. above for MP11 more details.

    Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.

    I did the entire bottom.

    1. click on Start, click Control Panel, and then double-click System.

    2 click on the hardware tab, and then click Device Manager.
    If you are prompted for an administrator password or for confirmation, type the password, or click continue.

    3 right-click on the CD-RW/DVD drive, and then select set to update driver.

    He asks if I have an OEM driver and / disk... NO.. I run the program through...

    "Hardware update Wiz can not find a better match the software installed"

    4. right click on the graphics card and select Update driver. »

    There is no "graphics card" on the material.  This machine has integrated graphics using a part of the main memory (or other) to run the video section:

    I find:

    AUDIO, VIDEO and GAME controllers (announcement)

    Audio codecs

    Audio drivers

    Legacy video capture device

    Media control devices

    Audio Sigma

    Video codecs

    All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.

    ?!  Ethernet controller "drivers for this divide (code28) is not installed.

    ?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT

    Device type - other devices

    MFG-unknown

    Location PCI bus, device 0, function 0.  "Drivers for this device are not installed, CODE28 to reinstall the driver."

    Has been through the usual (request for drive... Laughing out loud. Impossible to beat")

    See also:

    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

    http://support.Microsoft.com/kb/321641

    Did yesterday.  It installed/ran "MR. Microsoft Fixit' with the result:

    "Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed.  St ill did not.   MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:

    UNKNOWN

    Title 1

    Title2

    Title 3 etc., but could not do anything with this list.

    He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.

    Go BACK to # 1. now once again.  This is where I am.  MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "

    So far it's PROGRESS.  We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.

    I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)

    Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.

  • How many hours of music a Apple Watch will play on 1 charge

    How many hours of music a Apple Watch will play on 1 charge? I am trying to determine how much battery life I can start to play already recorded music (no streaming) from a Apple Watch.

    http://www.Apple.com/watch/battery.html

  • How can I burn a movie on windows movie maker to a cs that will play on my dvd player. It will only play on my computer

    I scanned the photos and put them on a timeline, then I did a movie with windows movie maker.  I have published to read on the computer.  Now I am attached to burn.  I burnded it successfully, but he only plays back on my computer.  I was not given an option to burn to play on a dvd player to watch on a TV.  That's what I want to do.  It said disk error when I play on the dvd player.  I tried to burn to a cd - r and dvd - r.  I need help I have windows vista.

    I scanned the photos and put them on a timeline, then I did a movie with windows movie maker.  I have published to read on the computer.  Now I am attached to burn.  I burnded it successfully, but he only plays back on my computer.  I was not given an option to burn to play on a dvd player to watch on a TV.  That's what I want to do.  It said disk error when I play on the dvd player.  I tried to burn to a cd - r and dvd - r.  I need help I have windows vista.

    =======================================
    Try to import the saved. In Windows WMV video file
    Creation of DVD and burn a DVD-video:

    Windows Vista - burn a DVD video disc
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  • CD drive won't burn dvd or read burned dvd but will play store bought dvd

    TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

    Hello

    Have you tried to close all programs and then insert the disc in the drive?

    You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
    Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
    However, it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    -----------------------------------------------------------------------

    Try this troubleshooting:

    Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
    solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
    that the troubleshooter does not, and those who "could" be the cause.

    Check with your system manufacturer Maker and device for possible firmware updates and the good
    Your player registry entries.

    Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
    other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
    a person with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How can I burn a recovery of the system factory image on DVD?

    When I started my Win8 computer a window pops up asking me if I wanted to burn a DVD factory image. I clicked Yes. A power failure stopped the process until it was over. I don't know how it restart. How do I do that again?

    When I started my Win8 computer a window pops up asking me if I wanted to burn a DVD factory image. I clicked Yes. A power failure stopped the process until it was over. I don't know how it restart. How do I do that again?

    Ask the manufacturer of the computer.  They created the process.

  • My DVD will play. My DVD says disc is bad or needs to be formatted when I try to burn. Backup stops and says back up does not have all the

    I want to backup my computer to an external hard drive but the popup of backup does not have this option.

    Hi Janice,.

    (a) have you tried using different DVD to burn backup files and check if it burns?

    (b) your use of any third-party burning software on the computer?

    (c) what is the size of the backup files that you try to burn on DVD?

    (d) you are able to burn CD/DVD in Windows Explorer?

    (e) you are able to perform the backup to internal hard drive? You cannot save to the C: drive, try to perform the backup on a different partition and check.

    Try to uninstall the burning of third-party of the computer software and check. Also try using different DVD to back up files. I suggest you follow these methods and see if it helps:

    Method 1: run this Microsoft fixit tool:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems

    Method 2:

    Navigate to the following location and delete all the files and then try to burn the DVD and check if it helps:

    C:\Users\(User Name) \AppData\Local\Microsoft\Windows\Burn\Temporary file Burn

    You can see this Microsoft article and check if it helps:

    http://Windows.Microsoft.com/en-in/Windows-Vista/change-where-you-back-up-your-files

    http://Windows.Microsoft.com/en-in/Windows-Vista/back-up-and-restore-frequently-asked-questions

    http://Windows.Microsoft.com/en-in/Windows-Vista/which-CD-or-DVD-format-should-i-use

    Hope this helps, if you need help on Windows or the problem persists, please let us know we will be happy to help you.

  • HD camcorders files saved as. MTS, how to save them in a format that will play on my computer?

    When I transfer my HD camcorder files, they are registered as .mts and are not playable and I don't know how to convert or save in a compatible format in the first place.

    Hello

    There is no mts converter software from Microsoft but you can use your favorite search engine and download a third-party converter to convert some .mts in another format.

    Note:  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Reference:

    Convert music, videos and photos from one format to another

    http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • burn a music CD that will play in car stereo

    When I create music CD using cd - r disc, they will only play on computer and not on the car radio. How can I fix this?

    It could be as simple as trying a different type of disc. I had a similar problem and found that they would play well in the car when I used another drive. depends on your stereo, I guess.

  • I am trying to burn a disc with photos - I bought the correct DVD but it does not work

    Try burning the photo gallary dvd - it won't work - I bought the correct dvd - what is the problem

    Try burning the photo gallary dvd - it won't work - I bought the correct dvd - what is the problem

    ====================================
    If your version of Vista has Windows DVD Maker... the
    next article might be worth a visit:

    Windows Vista-
    Creating Windows DVD
    Burn a video disc
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Windows 7 - with Movie Maker. How can I burn and finalize a movie on a dvd disc?

    I can not play the movie on my computer.

    He saved a MP4 on my hard drive - it wont; open for Windows Media, Quicktime - or one of several other mp4 players I downloaded (and uninstall)

    I chose the option "burn to disc" - thinking naively that it would actually burn something I could put on a dvd player and play.

    First of all - why not? Why I have this burn to a disc if it won't; Open or play on any computer or dvd player?

    Many of the forums say the option 'Choose the Mastering' and don't forget to finalize the disc.

    I can find no options of Mastering Windows Movie Maker 7 - and how I finalize with no obvious way to do it?

    I need this video slideshow for work - and I was home for days.

    What should I do to find themselves with a video slideshow mastered on a dvd disc that will play on any dvd player...?

    Thank you

    I can not play the movie on my computer.

    He saved a MP4 on my hard drive - it wont; open for Windows Media, Quicktime - or one of several other mp4 players I downloaded (and uninstall)

    I chose the option "burn to disc" - thinking naively that it would actually burn something I could put on a dvd player and play.

    First of all - why not? Why I have this burn to a disc if it won't; Open or play on any computer or dvd player?

    Many of the forums say the option 'Choose the Mastering' and don't forget to finalize the disc.

    I can find no options of Mastering Windows Movie Maker 7 - and how I finalize with no obvious way to do it?

    I need this video slideshow for work - and I was home for days.

    What should I do to find themselves with a video slideshow mastered on a dvd disc that will play on any dvd player...?

    Thank you

    =================================
    The following freeware can burn a video DVD very easily:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Freemake Free Video Converter (freeware)
    http://www.Freemake.com/free_video_converter/
    (Windows XP / Vista / 7)
    (* Read * all * the installation screens... it)
    may be a few items you want to unmark *)

    Freemake free Video Converter - how to burn video DVDs
    http://www.Freemake.com/how_to/how_to_burn_dvd_video

  • How can I burn on dvd iMovie projects?

    I've mastered the art of making videos using iMovie, but I can't understand how the engraved on a dvd that will play in any dvd player.  I tried to do some research to understand this point, but most of the answers I've found are for two years.  I need a current response to help me.  It seems that iDVD is the way to go, but it is not offered and more.  I've tried different converters video will no chance.  Once I got one to work and burned on dvd, but then it wouldn't play on anything other than my Macbook.  Please help me!  I just made a video birthday for my son who just turned one, and I need it to be on dvd.  Can someone help me?

    Buy iDVD.

    Yes, there are other programs that will put a movie on a DVD.   I tried most of the other substitutes.  None of them come anywhere close to the ease of use and power of iDVD. IDVD is specifically designed to work with iMovie.

    With iDVD, you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.

    IDVD is easy to obtain. It is available on the disc as part of iLife 11.  You can, but it on Amazon or ebay.

    IDVD is a wonderful piece of software, and is worth the modest sum of $40.  (works with all Mac OS 10.5 and newer.)

  • How can I burn and watch a dvd on my windows xp. and what do I do

    I want to know how to burn DVDs, s under windows xp, and I have to be able to do

    To watch DVDs, you need to install a DVD decoder...
    or download, install, and use a media player like VLC.

    Info about DVD decoders: Plug-ins for Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)

    ===

    If you want to burn video DVDs that will play in a
    DVD Player standalone you need DVD Authoring
    Software.

    The following freeware can be worth a try:

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.dvdflick.NET/Download.php
    (the download is: "dvdflick_setup_1.3.0.7.exe")

    Save the file to a folder on your hard drive and
    install from there.

    Be sure to read the Guide:
    http://www.dvdflick.NET/Guide.php

    Tutorials:

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    To create a video DVD base that should play in a free
    permanent drive DVD... try the following...

    First... read the DVD Flick Guide to familiarize
    with the program.

    Open DVD Flick and insert a blank DVD in your drive.

    If the window of Autorun from your computer... just close it.

    Click the project settings button and check... Video /.
    Target format... residents United States... Choose... NTSC /.
    Accept.

    The title button left click Add and navigate to your
    Video clips and select the ones you want on the DVD.

    You can have by selecting one and then use
    the up and down buttons.

    Left click on the button create DVD / OK / Yes / Yes.

    Please wait while the DVD is created.

    When the text "Completed successfully" is displayed you
    DVD Flick can close. Now you can eject your DVD
    and play in your DVD player.

    At some point you might want to buy more
    Advanced Cyberlink, Nero, Roxio, software
    Ulead, etc... but at least it is a start.

    Good luck.

  • How to burn a DVD in first Elements 8 to play on the DVD recorder.

    I use first Elements 8 with Windows 7, i760 quad core and 8 GB RAM. When I burn a project to a disc, it will play on this PC, but the drive is not recognized on my XP PC, or my DVD burner. My guess is that I burn like a HD DVD but can't see any way to change this. Can someone point me in the right direction please?

    Geoff, I think you're chasing the wrong questions. The less likely it's Premiere Elements is the production of unreadable discs.

    Did burn you your DVD files to a folder on a hard drive, rather than directly on a disc?

    Have you tried to use DVD-r or DVD + r instead of DVD - RW (which cannot read many DVD players)?

    Your source files - no matter where they come from - has no effect in your DVD playback. Once it has been converted, it is a matter of your disk drive, playback of your disc. If that is not the case, you must troubleshoot if this problem is a problem with the discs themselves, a problem with your DVD drive, or a problem or a problem with your burner.

    Combustion in a folder on your hard drive will eliminate the Premiere Elements as the cause of the problem. If the program can produce a VIDEO_TS folder full of VOB files, then you know that the problem is in your disks or your hardware.

Maybe you are looking for