The reactivation of

Similar Questions

• Monitor the problem flashing on the reactivation of the computer.

  Monitor the problem flashing on the reactivation of the computer.

  I have a new HP laptop G60 - 243 CL of Costco and a new HP W2207h monitor. The screen flashes when the laptop wakes fashion "sleep" with the HDMI cable connected. It works very well with the VGA cable. Any assistance in finding the cause would be much appreciated. Here is my hardware spes and a newspaper detailed observations.

  Thanks in advance,

  Paul

  --

  HP W2207h monitor

  680 x 1050 hz @60

  Laptop:

  HP G60 - 243 CL

  AMD Turion X 2 RM - 72 2.1 GHz

  3 GB RAM DDR2

  320 GB SATA, 5400 RPM HARD DRIVE,

  NVIDIA GeForce 8200 M G, with up to 1407 MB total graphics memory (shared).

  16 "16:9 1366 x 768 display

  Drive x drive LightScribe 8 with support double layer
  HDMI

  Here is my log.

  25/01/09

  1 unpack the monitor. With mobile connection cables on: HDMI, USB, power Turn on the monitor. It flashes. Black for about 2 seconds, then the light for a split second, repeat, ongoing. Turn off monitor, the driver of the CD W2207h monitor, restart. Monitor works normally.

  The monitor HP w2207h Readme says driver using driver Nvidia 10.65 or later version.

  The Control Panel on the computer laptop G60, NVIDIA GeForce 8200 M g: Device driver 7.15.11.7614, 11/07/2008 (this is the latest driver from the HP support page. See on 27-01-08 below).

  Install W2207h Monitor driver CD and restart the computer. Control Panel, device, Manager I see two monitors, the two "monitor PNP generic", first Hardware ID "MONITOR\HWP26A8", the second "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  2 put the laptop into sleep mode. Wake the portable computer and monitor flashes market, as described in (1). Image appears normally while the monitor is turned on for fraction of a second intervals. If reboot laptop, follow the work properly.

  Occasionally, flashing monitor heal without rebooting. Out of about 10-15 tent: once the monitor began to function properly while the computer shuts down. Once the monitor was OK on the reactivation of the laptop. Once, while the screen flashes, I removed the USB cable and the monitor started working. None of this is repeatable.

  3 removed the HDMI cable and started using the VGA cable and an audio cable. No more flashing on the reactivation of the computer. Very repeatable. About 7 7 times.

  01/26/09

  Control Panel, two monitors, Device Manager, the two "monitor PNP generic," first of all we have the Hardware ID "MONITOR\HWP26A8", second is "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  27/01/08

  Download NVIDIA drivers

  Downloaded from Nvidia support: Version 179,28, 2008-12-18, 179.28_notebook_winvista_32bit_beta.exe Beta (attention: are not supported by the laptop to the manufacturer.)

  HP support: Version 7.15.11.7614 has, 2008-09-08, sp40385.exe (same version that is installed.

  Version of the driver installed is the same that the one on HP support site, so did not not update driver.

  w2207h monitor download driver

  Download and install A Rev 2.0, 4.0.100.1189, 2008-10-16

  Version of the file now reads 6.0.6001.18000 (longhorn_rtm.080118 - 1840), I think it's the same as the driver already installed.

  Flashing problem is unchanged.

  –

  end

  It was the monitor! I brought my laptop and a HDMI cable at Staples where I bought the monitor and tried on the w2207h on set. It has worked well. Took the phone in and out of fashion 'sleep' several times. I'm in the store week return policy 2 stables will replace it. The seller was very accomodating to let me try different monitors with HDMI and VGA cables and my laptop while I was there. I even brought in a large piece of cardboard to protect the ceiling :).

• How can I disable the Mappoint 2006 for the installation and the reactivation on new computer

  How can I disable the MapPoint 2006 for the installation and the reactivation on new computer

  This forum is for posting comments on the web site of Microsoft Answers, only not to ask questions of Mappoint.

  Mappoint forum is here: http://social.microsoft.com/Forums/en-US/streetsandtrips/threads

• Reinstalling windows 7 ultimate retail after changing the SSD, the motherboard and the processor. I'm having a problem with the reactivation?

  I'll upgrade my desktop PC, by changing the motherboard, processor and SSD drive with the OS on it to boot. I have a problem with the reactivation of windows, and should I turn it off, somehow first, or the previous version will be considered as-enabled automatically? It is a retail, windows 7 64 ultimate version. Please advise, thanks in advance.

  Just reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Remember, if it is a retail upgrade license:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  You can skip to enter the product key and try the activation of the phone to work around this problem.

• Win7 in VM (VirtualBox) continues to request the reactivation

  ... I have an MSDN subscription, but at home I run Linux and I frequently distro hop.

  To simplify my life, I have a partition holding VirtualBox and a VM Win7 64 bit I get when I need to get into WINDOWS. Until very recently, since I started using Crunchbang, it always went without a hitch.

  Lately the WIN7 installation asked that I re - activate the license every two days.  I haven't added new hardware (real or virtual), and on the other that of the configuration records shared through virtualbox, I did change all the parameters of the virtual machine (if it is not broken don't fix).

  1. Is it just the WIN7 execution prices in a virtual machine?
  2. Is there than a more "compatible" Linux based VM Manager should I use?
  3. Is there a limit to how many times can I re-enable it?
  4. Is there a policy that says after support ends, the activations will be refused?
  1. If I use the phone method'm always limited by 10 activations (including any web activations)? or is it 10 re-activate by phone and by web 10 (total = 20)
     Ten of the reactivations by Internet without having to contact Microsoft. You can reactivate an unlimited number of times by phone.
  2. You said "on the same machine", which defines "the same machine?
     Which means, if it's the same machine you distro jump on and make constant changes.
  3. This limitation is for server installations?
     Yes, if they are retail.

• I had an accident and need to reinstall my photoshop program.  I have my photoshop 4.0 cd and know I bought an upgrade of c3 years but lost these figures. Where can I go to get the reactivation and downloads?

  I have my photoshop 4.0 cd and know I bought an upgrade of c3 years but lost these figures. Where can I go to get the reactivation and downloads?

  Hi herbertb,

  Please link to download Photoshop CS Versions below.

  Other downloads

  Download the installation file depending on your operating system.

  Let us know if it helps.

  ~ Mohit

• The overview of the reactive site. "Preview size" grayed out?

  This is my first time on Muse. From Dreamweaver, I thought it would be easier to build my 1 reagent on Muse site, because I'm very familiar with Indesign and other programs of layout etc.

  So Ive started to design the site. But when I try and get an overview of the site on the tab preview of Muse, I am not able to view this site on an iphone. Or any other device.  So I do not see if my reactive site works. See picture attached.

  I'm sure its something simple that I need to do first.  Any help would be appreciated with gratitude

  Thank you

  Andy

  

  Thus it is not live until you get an overview of the site in other devices, however, for the same Business Catalyst site as temporary download test url and then can display the same url in the browser on the device.

  Also note that download your Business Catalyst as a temporary url is not living, this facility is only for preview of our site in different devices and can make the necessary adjustments.

  For the edition of Business Catalyst, you can click file > publish on Business Catalyst.

  Best regards

  _Ankush

• Withdrawal of a MovieClip in a statement when the reactivation of an application.

  Trying to get the code checks to see if a movieclip is present and if it is then remove it when the user leaves (or back) on the application the device (through a phone call, menu press etc.).

  In my application when the user quits the application, they receive the possibility of recovery from the same point or will the first screen.

  If a clip is located on the screen then and the user takes over then it is not a problem.

  If a clip is on the screen and clicked restart this is where the problem occurs and I get an error (or nothing, depending on the encoding options different I tried).

  My goal here is to have the system, find the clip, and remove them when the application is reactivated via the restartF function. Refer to the section of code below.

  • There is no problem when I only have the items blue.
  • There is no problem when I only have items in Blue and green.
  • The problem occurs when the code is in its entirety; Blue, Greenand orange.
  • I get the following error when I click on the restart button:

  TypeError: Error #2007: child parameter must be non-null.

  at flash.display::DisplayObjectContainer/addChild()

  • Made of the anther: all variables for each color are reported in different time periods:
    

  For example:

  Image 1 (this would represent statements in blue)

  var mywordGrumpy:vocabulary_Grumpy = new vocabulary_Grumpy();

  var mywordIncline:vocabulary_incline = new vocabulary_incline();

  I reduced the problem to the restartF function in the code below:

  Item code:

  Adds screen pop - up and request that they would like to resume or restart.

  function onComeBack(event:Event):void

  {

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  If (! modalW)

  {

  modalW = new ModalW();

  addChild (modalW);

  modalW.x = - 97;

  modalW.y = - 8;

  modalW.resumego.addEventListener (MouseEvent.CLICK, resumeF);

  modalW.restartgo.addEventListener (MouseEvent.CLICK, restartF);

  }

  on the other

  {

  addChild (modalW);

  }

  }

  Triggered by reconnecting and brings the user to where they left.

  function resumeF(e:MouseEvent):void

  {

  removeChild (e.currentTarget.parent);

  gotoAndStop (so.data.currentFrame, so.data.currentSceneName);

  }

  Triggered by restarting and directs the user to the main screen. If statements remove clips if necessary.

  function restartF(e:MouseEvent): void

  {

  If (addChild (myPlayCredits))

  {

  removeChild (myPlayCredits);

  }

  If (addChild (myPlayAbout))

  {

  removeChild (myPlayAbout);

  }

  If (addChild (myPlayAuthor))

  {

  removeChild (myPlayAuthor);

  }

  If (addChild (mywordGrumpy))

  {

  removeChild (mywordGrumpy);

  }

  If (addChild (mywordIncline))

  {

  removeChild (mywordIncline);

  }

  If (addChild (mywordOodles))

  {

  removeChild (mywordOodles);

  }

  removeChild (e.currentTarget.parent);

  gotoAndStop("1","MainScene");

  }

  What I am doing wrong?

  I found the answer:

  Variable declarations were not on the same frame as the fi/statements then. I solved the problem by adding (for each variable):

  var mywordGrumpy:vocabulary_Grumpy = new vocabulary_Grumpy();

  var mywordIncline:vocabulary_incline = new vocabulary_incline();

  var mywordOodles:vocabulary_oodles = new vocabulary_oodles();

  This solves the problem! At the time where variables were called they had not been declared, so they had no value, so the error message.

• the reactivation of iCloud photo library

  Had the following issue: my photos for mac app was stuck on downloading the last 22 pictures in my photo library to iCloud.

  I did some research and it was suggested "just deactivate and then reactivate" the library of iCloud.

  Well surprise after trying to turn it back on I got a dialog box telling me he does not have enough storage space, apparently he wants to download all the photos again?

  Question: Is there a way to force the photo app to use my iCloud already synced photo library.

  Because reuploading a library of 600 new GB would be powerful frustrating.

  Someone at - it an idea?

  Best regards, Jelger

  Update: I managed to start the synchronization again by activating via the parameters of iCloud iCloud photo library.
  It gives me a warning that I will probably will run out of storage iCloud.

  Hope now only it syncs to the same library and will disregard the duplicates.
  I'll post an update as soon as I can confirm anything.

• In the reactivation of Java suggest allowing the add-on (in my case Java Deployment Toolkit 6.0.340.4) isn't that an old man?

  In regards to your opinion on "old versions of Java were blocked - updated and unlock Java" to
  http://support.Mozilla.org/en-us/KB/update-and-unblock-Java

  In the Java section re-conducive to the list point 3, you declare:
  Find the element of the Java platform / Java Runtime, and then click Activate.

  My question is:
  The item is listed in the Add-ons like Java Deployment Toolkit 6.0.340.4 Manager (disabled) 6.0.340.4
  These are the numbers that concern me. I are enabling the latest version of Java, or an old one?

  Cheers, Tony Smith, Sydney, Australia

  Do you still need the Java Deployment Toolkit?

  That "toolkit" is usually necessary only for development work Java programmers.

• The reactivation of several disabled

  I lost my Skype number some time ago and he would like to return. I don't think that it is used by anyone. How would I go to do this?

  Just had an idea and it worked. Search for area code (6 digits), see where it is located, choose this location and enter the 7 last

• The reactivation of my stolen phone returned

  My iphone was stolen in my work and I had reported stolen from Sprint and had my phone deleted everything and wiped. A month later, I had recovered my phone once more to my work. I had already used the insurance and paid for a new phone. I would like to re activate the old original phone instead of use the refurbished phone, that I was sent. I tried to change the SIM card, but I'm not sure that Sprint uses SIM cards as other carriers because it only allowed me to pass through you connecting to itunes and stopped me when I tried to update my last back place to icloud.

  If someone have some tips on how to reactivate my old iphone and complete the restore process. I have a feeling I'm going to need to either connect with sprint or Apple to have this "flag" stolen phone.

  Go to iCloud.com, then settings and see if your device is listed there as lost.  If so, go ahead and remove it for your account.  Then contact Sprint and let them know that you want to use the phone otherwise it won't enable this are a CDMA network and use a radio that is not dependent on the sim card.  The sim card is still required for the activation process that it is used for international options.

• Satellite U400 - stop after the reactivation of the battery charge

  Hi all
  8 days ago, I bought a Satellite U400 laptop, and all the drivers and BIOS are up-to-date.

  I close cover mode standby when the battery on charging with AC main branch and led red indicating the charge is ok...
  When he is awake by opening the cover, red led is off load display, but the icon on the right buttom it says on AC and battery recharges.
  But it is not charging and the battery level drops.

  Is there someone actually deal with this problem?
  Thank you for your support in advance.

  Hello

  Are you sure you have the latest version of the BIOS of your laptop?
  Check again on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  The reason why I ask is that I founded this Toshiba document and in my opinion a BIOS should solve the problem.
  http://APS2.toshiba-tro.de/KB0/TSB8702EU0001R01.htm

  Welcome them

• The reactivation of touchscreen

  Hello world

  I have a Sony vaio 14 a Flip, which has random touchscreen input, earlier today, I turned off my cell phone because I need to do my job, hoping that I could him backward and try to solve the problem of the touch screen. I disabled it through Device Manager > Interface devices > USB Input Device and it works beautifully.

  However, now, when I wanted to allow him to return, I couldn't find the same USB input device that I disabled previously, I have found no option of stylus input / when I tried the search button (before I disabled the touch screen, there are these options). Can someone help me with this? I tried to find a solution, but I found nothing... I just bought this laptop about 2 weeks ago and touchsreen comes out about 2 days ago and it is getting worse every day...

  Hi MarkPa,

  Thank you for your reply,
  My model name is SVF14N16SGB Sony Vaio was 14A.
  Funny, yesterday when I checked my mobile device manager, the option to activate my touch screen appeared again...
  Since the touch screen is still not dunctioning well, I decided to disable the touch screen again and I couldn't find the option to turn it on again so far...

• The reactivation of Windows Defender in Windows 8

  Hi all

  This is my first time here, so please bear with me.

  I bot a desktop HP Pavilion yesterday and everything was going well until I tried to turn on WINDOWS DEFENDER. The message is "Windows Defender disabled by seller". I don't want to use any other anti-virus, anti-blah... blah package since I was an all-things-Microsoft kind of guy. Anyway, how can I go abt turning Windows Defender powered? I really, really appreciate anyone who can help me on this one.

  Yes, you need to uninstall "Norton Internet Security", following the steps you provided. I said "disable and uninstall", this is because many AV programs won't let you unistall them while they are active.

  To reactivate Windows Defender, go to the new Windows 8 desktop and type 'Action', click on 'Settings', and click on "Action Center"... check the status of Windows Defender and click the button "turn on Now". Update definitions for Windows Defender... and then do a full scan.

  Please click the White Star of KUDOS to show your appreciation