How read the images path ' in the stored catalog?

Similar Questions

• How read the Archive.msf and .sbd files stored on the backup media without restoring the current profile?

  I have stored vast e-mail Archives of files on backup media to free hard drive memory. How to read Archive.sbd and Archive.msf selected files without restoring them to the current profile? Can I create a new profile and restore it temporarily?

  Tbirds mail-container has a pair of files

  (1) - name of the container (with no extension) here are all the emails one after the other.
  (2) container - name.msf one type of index, if deleted itwill be restored

  If there is any subcontainers, there is also a container - name.sbd which is a directory (map)
  In this directory there are new pairs or even directories.

  Files without extension is the mbox files. As they exist even when there is simply a directory .sbd and not emails, you need only point to this mbox (empty) file to load the tree entire (folder - map-) use the ImportExportTools add-on.

• How read the upc barcode in-app

  Hello

  Hoping someone can lead me in the right direction, I want to be able to read upc barcodes from within my application. Is there a code example?, a lib recommended to use?, IE zbar.

  Please let me know, interested in your comments.

  Thank you

  Hello

  hand. QML is

  import bb.cascades 1.2
  import bb.multimedia 1.0
  import bb.cascades.multimedia 1.0
  
  Page {
      Container {
          id: barcodeContainer
          onCreationCompleted: {
              camera.open(CameraUnit.Rear)
          }
          Camera {
              id: camera
  
              onCameraOpened: {
                  getSettings(cameraSettings)
                  cameraSettings.focusMode = CameraFocusMode.ContinuousAuto
                  cameraSettings.shootingMode = CameraShootingMode.Stabilization
                  applySettings(cameraSettings)
                  camera.startViewfinder()
              }
  
              onViewfinderStarted: {
                  OrientationSupport.supportedDisplayOrientation = SupportedDisplayOrientation.CurrentLocked
              }
  
              onViewfinderStopped: {
                  OrientationSupport.supportedDisplayOrientation = SupportedDisplayOrientation.All
              }
  
              attachedObjects: [
                  BarcodeDetector {
                      id: barcodeDetector
                      camera: camera
                      formats: BarcodeFormat.Any
                      onDetected: {
                          console.log("*********************************************************************************");
                          console.log("Scanned barcode is " + data);
                          console.log("*********************************************************************************");
                      }
                  },
                  SystemSound {
                      id: scannedSound
                      sound: SystemSound.GeneralNotification
                  },
                  CameraSettings {
                      id: cameraSettings
                  }
              ]
          }
      }
  }
  

  in the .pro file add -lbbcascadesmultimedia-lbbmultimedia

  Add use_camera bar - descriptor.xml

• How read the error message displayed in the OAF page... its urguent very please

  Hi friends,
  
  In a stnd irec registration page, if the user selects a StartDate or EndDate field as a later date like January 2, 2019, his watch a validation error database as HR_ST_DT_INVAL_PEM in the page of the OFA. So I want to replace this error with a custom message such as, "Please enter a valid start date.
  Can someone please help this.its very urguent for me...
  I analyzed according to origin of this error message, I found that the CO page called AOS, AM his call to an API that makes this error message.

  Hi GA,.

  Error message could be popping up every time you naviate to a foeld to other similar to when field Instance of new element or when file validate.

  In this case, you can take this field say that your domain is enterOrg

  if (pageContext.getParameter("enterOrg") != null && "XX_ORG".equals(pageContext.getParameter("enterOrg")) {
            try
               {
                      if ()
                         {
                                  throw new XXException("Your Check");
                         }
                   ..
                 ..
                   ..
                   ..
               }
             catch(XXException re)
                              {
                              String errMsg;
                              MessageToken tokens[] = {new MessageToken("XX_TOKEN1", token1)
                                                      ,new MessageToken("XX_TOKEN2", token2)
                                                                  };
                              OAException errorMessage = new OAException("XXPA","YOUR_MEG_IN_FND",tokens,OAException.ERROR,null);
                              pageContext.putDialogMessage(errorMessage);
                              } 
  
  }
  

  Thank you
  JIT

• How do the backup catalog on different hard drive for archiving?

  Hello!

  I regularly update / save my catalog when you exit Lightroom but I also back up to another hard disk.

  I mean drag-and - drop isn't the way to go.  Is there another way to backup on hard disk other than Lightroom Catalog is stop smoking, except by using a backup program?

  Thank you, Teri

  When you leave LR, before clicking on the backup button, click on the button to choose and point the path to your favorite place.

• How to read the two columns of data in a file of PDM.

  Hi all

  I am reading two data columns for the 2nd of a PDM file two sheets, as shown below.

  

  Two columns of data must then be shared so they can be displayed in a xy chart and also apply a linear adjustment VI. I implemented the graph xy and linear adjustment using a txt file (see below), therefore all the outputs work, however this application with a tdms file turns a little more tax.

  

  

  

  So, essentially, that I don't know how read the correct leaf and therefore the columns in the PDM file and then how to produce the graph xy and linear adjustment of the data types produce. Here's my current attempt, which produces several errors of the type of terminal, as well as not being able to select the exact data in the PDM.

  

  Any help/suggestions/example vi on this asap would be greatly appreciated.

  Thanks in advance,

  Pete

  Also the PDM file viewer. VI helps you easily understand the structure of data files.

• SoftMotion cRIO - how to read the position of a host from a sample of the expedition?

  When you open the examples provided with NI SoftMotion, generally there are two loops. The main loop and a loop that contains the following message:

  "The position of reading and tracing normally would be on the host by reading data from the target.  This is done in this example for simplicity. »

  Then, we advise on the Panel before you go to ni.com/info/f/ and enter the info code nismex for more information on the use of this example in a system of real movement.

  My question may seem obvious, but how "read the position on the host by reading data from the target?

  I tried to use the block function NOR SoftMotion read inside a VI on the host, of course, it does not, because the resource is on target.

  Should I leave the second loop inside the VI running system cRIO and just no conspiracy, but subscribe to a shared variable? I see that you can do a right click on the function block and select if you want output to be a shared variable. Or this second loop is supposed to be removed from the VI running on the target RT? How reads the position then?

  To see an example of what I mean, open this example: C:\Program NIUninstaller Instruments\LabVIEW 2009\examples\Motion\FunctionBlocks\Axis Straight Line Move\Axis right Line.lvproj

  Thank you

  Fabiola

  Concerning priority and when you call the motion function blocks:

  The NI SoftMotion engine for cRIO uses a background 'pilot' that runs in phase of analysis on the CompactRIO system engine.  This provides the required sync and sync for motion runs correctly.  This 'pilot' motion function blocks, simply send asynchronous commands.  You can consider them as an API to the engine of control of movement control.  You are not required to synchronize the function of movement of the scanning engine blocks or even to perform at a highest priority.  However, you will probably choose to run these a higher priority or in a loop timed for reasons of prioritization of execution.  For more details on the NI SoftMotion architecture and recommendations on how to build movement on CompactRIO systems discover the CompactRIO (http://www.ni.com/compactriodevguide/) Developer Guide.  It has been updated in December 2009 and Chapter 5 now has much on the order of movement on CompactRIO complete with examples of projects.

• Read the story of calibration veriStand Vi file

  I need to update the scale and offset for channels to HAVE it. I'm looking for an easy way to read the stored scale and offset values from the file history of Calibration and apply them to the user channels that will be used in calculated channels.

  Is there a way to read the file Ni Veristand using LabView calibration history?

  I wrote a small tool for that earlier. Give it a try and see if it fits your needs.

• How the archives catalog

  How do the complete catalog directory archives at once
  
  Published by: 1002437 on April 25, 2013 02:59

  Hello

  Welcome to the forum

  connect with rman and you can use

  Catalogue start with "";

  After that, you can check with

  overlap archivelog all;

  You can also visit the link for more details

  http://www.Oracle-base.com/articles/10G/RMAN-enhancements-10G.php

• LR cannot read the catalog .psa (Photoshop Album Starter Edition 3.2)

  Hello

  I use Photoshop Album Starter Edition 3.2 to manage my photos of 12'000 (with tags) and I'll switch to Lightroom. But I can't import the .psa catalog in Lr2.3.

  LR can read only catalog .lrcat, .lrdb and .aglib!

  I've renamed .psa catalog catalog .aglib etc but nothing happenend.

  My idea, I will:

  1. install PSE 7,

  2. read the .psa catalog (is it possible?)

  3. the export in the catalog .lrcat, .lrdb or .aglib (is it possible?)

  4. can import them with Lr with all tags

  Is there an easyer do?

  My brain is in turmoil:-------.

  Thank you

  Tennistin

  PSE7 should be able to convert your catalog. I don't really know, I haven't tried and haven't read on the conversion of the catalogues of PSA Starter Edition, but I'm optimistic.

  The problem is that the latest version of Lightroom will not read the catalogs PSE7. Probably when Lightroom 3 comes out, it will read the catalogs PSE7. So, I search the Internet to see if there is somewhere to download the demo version of PSE6 or PSE5. If you do not have one of these versions, they are converted as well your PSA catalog. Lightroom converts certainly PSE5 and PSE6 catalogs.

• How to read the 32-bit depth .bmp image

  How to read the image, 32-bit depth using LabVIEW .bmp?

  
  

• How can read/write on a file and stored in the internal memory of the device, 10 BlackBerry?

  I want to store a string value of my request. After that, I remove my device app & reinstall my app. I want to get the previous value stored in recently installed application.

  I think that if I can write the value to a file that is located in the internal memory of the device. After that, I read the value of this file in any time. I am new to the cascade of Blackberry, so I don't know how to write / read a file.

  Please help me...

  Thanks in advance.

  Hi all

  I solved my problem. I'm using the code below:

  QString call: readFromFile()
  {
  QFile textfile("shared/documents/Test.txt");
  QString str ="";
  If (textfile.open(QIODevice::ReadOnly |) QIODevice::Text))
  {
  QTextStream in(&textfile);

  Str = in.readAll ();
  }
  else {}
  QTextStream out (stdout);
  off<>
  }

  TextFile.Close ();

  return str;
  }

  Thank you all for the valuable suggestion...

• How to read the .txt adfLib pot file to the model layer by using the relative path

  Hello
  
  In my application, I use the ExtendedDynamicFldTbl (extends weblogic.wtc.jatmi.DynamicFldTbl), which the manufacturer requires the field file path table as a parameter.
  
  In the API, it is said that this name of path can be an absolute path, a relative path to the directory where Java has started, or a relative path that can be found as a resource on the classpath.
  
  I have created this ExtendedDynamicFldTbl to the model layer project, placed the fild_tbl.txt in a separate package and pass the path relative to the DynamicFldTbl constructor.
  
  Given my code below to get the instance of ExtendedDynamicFldTbl
  

  package model.tuxedo;
  
  public class ExtendedFldTbl  extends DynamicFldTbl
  {
  
      private static ExtendedFldTbl extendedFldTblinstance = null;
      
      public ExtendedFldTbl(String tablePath, boolean flag)
      {
          super(tablePath, flag);
      }
      
      public static ExtendedFldTbl getInstance()
      {
          if (extendedFldTblInstance == null)
          {
              URL url = extendedFldTblInstance.class.getResource("resource/fldtbl.txt");
              if (url == null)
              {
                  throw new RuntimeException("Tuxedo Service : fldtbl.txt is not found in the path 'model.tuxedo.resource' ");
              }
              extendedFldTblInstance = new ExtendedFldTbl (url.getPath(), true);
              String[] list = extendedFldTblInstance .getFldNames();
              System.err.println("fldtbl loaded. Total FML entries loaded = " + list.length);
          }
          return extendedFldTblInstance ;
      }
  }

  I just added the output of the build of the layer model to view the project of the layer and tested. It works fine and I am able to get the ExtendedFldTbl instance with all loaded fields. But rather than add dependencies, if I create an adfLibJar for the layer model project and you add to view the project of the layer, it does not work. It is not ablt to read the file of adf lib jar file.
  
  Issues related to the:
  
  1. How can I solve this?
  2. Although I have kept the field text file table in the source of the project itself, when I read the url, it is

  "C:/Documents and Settings/raguramanv/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/servers/DefaultServer/tmp/_WL_user/SampleWtc/3gkmt9/war/WEB-INF/lib/SampleWtc_Model_adflibSampleWtc1.jar!/model/tuxedo/resource/fldtbl.txt"

  Instead of the physical directory, how can I use application in model layer context?
  
  
  Thanks in advance
  
  Rambeau

  Hello

  Try /adf/ or /afr/ in the URL. Then includes the ADF resource loader which is used to get the contents of a lib of the ADF. Take a look at the structure of ADF library where the file is located in. It should be in a directory with /adf in the folder structure

  Frank

• How to read the registry stored in IEEE 754

  Hello!

  I need to build an application to read the registers in my gauge. Application is almost complete, but I get to keep a record of the values differ from the values on my gauge (e.g. I have voltage 230V on the gauge and values about 20 k in application). Stores meter values in the IEEE 754 32-bit format and I have no idea how to read to get the correct value. I have seen that it is possible with the help of "Transtypé", but I do not know how to configure, I am totally newbie in LabVIEW. I'll be very grateful if someone could show me a VI with playback of IEEE 754 option, or just tell me how to do it in detail (what to click, what to write, etc. )

  Sorry for my English, I hope I don't have a lot of mistakes

  Welcome them

  Note your red dots, they indicate a data type mismatch. Remove the array of bytes to a string, because it truncates your U16 to U8 array elements. Cast and unflatten directly accepts arrays of U16. (corrected, see answer below)

  Also change your 'record keeping' to a constant of diagram (Terminal right-click... change constant). Only the type of questions, data are irrelevant here. (Should not be a scalar SGL instead?)

  Sorry, I don't have the Toolbox so miss me your Subvi.

• How read/view the image from SD card on the device

  Can someone please pass on a link that has a tutorial for the playback picture from sd card on the BB device. Thank you.

  Read the file into a byte array (let's call it data) using FileConnection (is there an example in the docs, enough to get you started), then call EncodedImage.createEncodedImage (data, 0, data.length) to create an EncodedImage.

  From there, you can do with this image you want - BitmapField.setImage (), graphics.drawImage (), etc.