How reset the warning of expiration of ink cartridge for D6160 on PC W7? This blocks the print jobs.

Similar Questions

• C5150 - how to reset the printer to clear the network password?

  I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

  I guess that you did not read my * last * post here, which has been designed for you. in any case...
  
  PhotoSmart C5100
  -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
  -Press "OK".
  Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)
  
  TO MAKE RESET "Half full" in the HELP MENU:
  
  -Use the > to scroll to 'Resets the Menu' and press 'OK '.
  -Put "Full Semi" highlight Reset and press 'OK '.
  -Unit will shut off by itself in 3-5 seconds
  -Power and then turn it back on by button / stop
  -Leave the print alignment page - do NOT cancel
  -Allow to go through maintenance and Photosmart screen (normal)

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• How to cold reset the printer Laserjet M175nw MFP Color 100?

  Try changing the settings wireless, but keeps on asking for a password that I don't remember.

  Printer works fine so hard connected to the network.  ePrint works very well.

  Just updated to the latest firmware available.

  I just need to change the wireless settings that I recently changed my password for wireless network.

  In addition, access to the menu is disabled from the control panel of the printer.

  So the only way that I can think of is to reset the printer and start the installation from the top.

  Thank you.

  Hello

  You must perform initialization of storage generally in order to remove the password configured in the fuly, any other reset will not erase this kind of configuration.

  In order to perform this reset, you should contact HP Support.

  You can get the details to contact HP by selecting your region and following technical support after purchase below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Kind regards

  Shlomi

• Advantage of ink HP deskjet 5525: I can't find the ink cartridge for my printer

  I bought a printer HP deskjet ink advantage 5525 in Saudi Arabia, then I brought it to the Philippines, I found the same ink cartridge for the printer here (655 in Saudi Arabia, in the Philippines, it is 685) but the problem is my printer rpet ink, I bought is not compatible. What should I do? Thank you

  Hello

  You must contact HP Office in your country now and ask them how to reset the printer to allow to use inks in the new country. Please read:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• Reset the printer C6180 for different regions cartridge

  I recently moved to the United Kingdom in New Zealand. My C6180 is configured for cartridges 363 series available in the United Kingdom. The same cartridge is 02 series in New Zealand, and when I install the printer tells me that the printer is not configured for this cartridge. I think I have to reset the printer to a different area, so two questions.

  1. How can I do this and if I need to call HP where can I find the number?

  2. I guess I can't mix cartidge types so will have to replace all of them, correct?

  Thank you

  B

  1 make sure you buy set of inks that are compatible in New Zealand and make sure that SW has been installed on your computer.

  2. Please call technical assistance from HP - 0800-441-177 for more information.

• I have Photosmart 5580. When I switch to the power I get the 9995F886 message. I have reset the printer and error

  When I switch to the power I get the 9995F886 message. I have reset the printer and the error disappeared. What is this error message? How can I delete it for good.

  bedamax,

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• where to buy in the ink cartridge for deskjet 2050 bought in Dubai

  I haven't bought product HP DESKJET 2050 MODEL NOJ510a no CH350C IN DUBAI AND has BEEN using CARTRIDGE No. 122.
  NOW I am in India and that no cartridge is available.
  What I'll do. Seller says computer store that is not available for Dubai.
  OTO.

  Hi Oto,

  In India, you should buy the black and color ink cartridges HP 802, then you should contact the HP support and reset the printer in your area:

  http://WWW8.HP.com/in/en/contact-HP/phone-assist.html#section1

  Be aware that resetting the printer to the India only 802 ink cartridges will be accepted by the printer unless you be able to return for another area in the future, be also well aware that this process is limited and cannot be more than 2 or 3 times for the device.

  Shlomi

• How to stop the print job on Laserjet Pro m1217nfw MPF

  I want to know how I can to pause the print job on my printer in order to return the page around and print on the other side. I read in the quick start guide and none of the buttons seem to do exactly that, the closest being the X button, but that cancels all the work print entirely. In other words, I tried to do is pulling paper out of reach, so he has to wait until I have insert new paper, but then when I reinsert the battery, it takes FOREVER to reset and go on with the work. I'm used to be able to do that on my old printer, since it had a pause button and he saved a ton of paper by allowing manual two-sided printing. Thanks in advance!

  Hello

  Based on the #73 of the following record page, you must leave it on the last page before manual turn up-side-down to print the other side.

  http://www.manualsprinter.com/manuals/HP/HP_LaserJet_Pro_M1217nfw.PDF

  If you want more control, you can divide a long document to a few small parts by sending several times to the printer you (for example, 1-40, 41-80, 81-120).

  Kind regards.

• Reset the printer: what you need to know

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  If the printer has already damaged due to her fiddling in the care of the menu, you may need to Contact HP for (paid) service.  Best not to do the damage in the first place...

  An example of the damage that may be caused would be the printers that use special cartridges installation.  Reset the printer to factory conditions can cause sound to demand once again the cartrdiges Installer.  If the original cartridges of configuration have been exhausted or discarded the user must contact HP for cartridges to install since there is no distribution channels.

• HP f2480 stopped putting ink on paper, otherwise all the other indications of the print job.

  HP Deskjet F2480 works very well for more than a year.  without any changes to the computer or printer, he simply stopped putting ink on paper, but all other printing features seems to work very well.  Put in the new print cartridge, without change.  Replaced by the old printer exactly the same that I had used before, with the same cartridge new and even tried a second cartridge, same problem.  Delected all the printer setup, then reinstalled, without change.  Makes cleaning of the computer, defragmentation, malware check, everything and of course restarted several times.  Yet once, deleted all the configuration of the printer and completely reinstalled from scratch.  Return the most recent printer with new print cartridges try several different, still nothing.  Cannot print an alignment page, just came out in white, except for a small red triangle.  Tried to test pages, nothing.  It sends the print job in the queue and returns to the printer, the printer feeds the paper and attepts to print, but nothing's going on the page.  Envoy of printing from a laptop computer in a network and the same problem.  double checked all cables.  I am at a loss what to try next.  It doesn't seem to be the material of the printer cartridges of ink, no drivers or software, no cable.

  I am betting that the contacts on the cartridge are not completely in contact with the cartridges or cartridges must be sent through the cleaning process. Following the link are two documents that should help you. The first document contains the steps to clean the contacts on the cartridge and the printer. The second contains the steps for the cartridge to be cleaned mechanically and fix the printing problem. If none of this solves the problem and you have already tried a different cartridge, you need to replace the printer.

  "Print the cartridge failed", "Cartridge problem" or "Incompatible cartridge" Message is displayed on the computer:
  http://goo.GL/kNnwP

  Troubleshooting print quality problems:
  http://goo.GL/6GCRE

• HP 4500 Envy: How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  I don't want to receive the email confirmation of the printer - how do I disable it?

  Hello

  Please sign in to your account connected HP

  b click my account

  b click on Notifications.

  (c) uncheck the e-mail notifications

  d save change

  Kind regards.

• HP deskjet 1000 do not print using windows 7 How to the printer driver

  My hp deskjet 1000 printer do not print using windows 7 How to the printer driver

  It worked before on this PC?

  Full features drivers are here, select the bit version correct victory

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=4066377#n187

• Reset the printing system - what happens exactly; 10.5; OJ Pro 8000n

  Hello all-

  Well the bug in the software update (10.5.8) did.  I forgot that HP Printer Drivers update 1.1.1 continues to appear even if its been installed before.  As a result, I have now lost some features with my new OJ Pro 8000n.  I plan on resetting the printing system, but first I want to be sure I understand exactly what is happening.

  I have a much older Business Inkjet 1100d also installed, and I am not totally convinced that if the former driver for it gets uninstalled by reset the printing system I can find the old disk to reinstall this former driver and all the features.

  My impression is that reset the printing system removes all printers installed Print & Fax Preference, but does NOT the driver software and the real characteristics.  (On the other hand, I assume that the "scrubber" option removes all the drivers and extras?)  Am I correct that?

  Thanks - Randy

  Well Yes, reset the printing system does not remove the printer software or the driver.

  Here is an article from Apple stating (at a very high level) what this function.

• How to cancel the print job with HP8610 Control Panel

  Is it possible to cancel a job using the control panel of the HP8610 instead of using the Task Manager?

  @LucyRicky,

  If a print job is in progress, you should see an option 'Cancel' on the display on the printer. Press Cancel to stop the print job.

  I hope that helps!