HP f2480 stopped putting ink on paper, otherwise all the other indications of the print job.

Similar Questions

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• Paper jam in the printer hp photosmart c4480

  Paper jam in the printer hp photosmart c4480

  How do you get the A6 envelope to remove it?

  Paper jam in the printer hp photosmart c4480

  How do you get the A6 envelope to remove it?

  ========================================
  The following items may be worth a visit:

  HP Photosmart C4480 all-in-One Printer Troubleshooting
  Jams & feed problems
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=46315&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3418705

  Jam paper with HP Photosmart C4480 all-in-one. ?
  http://answers.Yahoo.com/question/index?QID=20090409194542AAZIhWS

• Paper jam in the printer HP Deskjet 3520 e-All-in-One (model SNPRH-1102)

  I had been using HP Deskjet 3520 e-all-in-one printer over a year until yesterday the printer suddenly jammed paper. I have some ideas out of A4 paper to let the printer works normally again. I need printer for printing currently. Please help, anyone here.

  Hi Lsyj,

  I can help you with the paper jam, you have experience. I found the following document that will guide you through the steps needed to solve the problem; A "Paper jam" message on the control panel.

  I hope this helps.

• How to stop the print job on Laserjet Pro m1217nfw MPF

  I want to know how I can to pause the print job on my printer in order to return the page around and print on the other side. I read in the quick start guide and none of the buttons seem to do exactly that, the closest being the X button, but that cancels all the work print entirely. In other words, I tried to do is pulling paper out of reach, so he has to wait until I have insert new paper, but then when I reinsert the battery, it takes FOREVER to reset and go on with the work. I'm used to be able to do that on my old printer, since it had a pause button and he saved a ton of paper by allowing manual two-sided printing. Thanks in advance!

  Hello

  Based on the #73 of the following record page, you must leave it on the last page before manual turn up-side-down to print the other side.

  http://www.manualsprinter.com/manuals/HP/HP_LaserJet_Pro_M1217nfw.PDF

  If you want more control, you can divide a long document to a few small parts by sending several times to the printer you (for example, 1-40, 41-80, 81-120).

  Kind regards.

• HP 5510 do not put ink to paper.

  I have an HP5510 printer.  It goes through all the steps of printing, but does not ink on paper.  I am running Vista home edition.  I can copy the printer turned off or shut down the computer and the same thing happens.  Why?

  Did you remove the Strip contacts?

• Do not put ink on paper from the printer. Printer e-all-in-one Photosmart HP 5520

  Product name/number:

  HI - try following the steps described inthis document, which includes a test page printing.  If the test page has printed nothing on it, you will know that it is a nuisance material - printer or ink.  In any case, the document should guide you through the steps to solve.

  Hope that helps.

• Ink cartridge ran everywhere in the printer

  Black cartridge leaking.   Now the masses of black ink similar to tar sticking inside the printer. An idea of the best way to clean?

  If you open the cartridge access door, and let the cartridges come to the centre and pull on the power cord, it will give you access to the right side.

  The ink put on printed material or leaking of the printer? How did you noticed it?

• HP Photosmarts 7520: printed paper back in the printer before finishing

  Lately the print when I print a document arrives at halfway of the printer, and then it goes back into the printer. The window says 'let dry ink '. The printer has an error message but when I click on the red X on the window, completed copy will come back. No idea why? Just started doing so a week ago.

  The printer will back the paper to print on the back if "Duplexing automatic" is selected.  Check the settings of the driver.  What is the error message?  The troubleshooting steps described here can help solve if there is a paper jam message.

• Photosmart 6520: I can't insert receipt paper tray in the printer

  I used my printer for months, and now I had a paper jam, which I fixed it, but I can't turn back the printer - I can't put the tray paper in.  In fact, I don't know "bac" is the name of the part, with that I have a problem.  I can slide into the status bar that has paper in it, but the piece that goes on, which itself contains a piece of rectangular plastic people turning out direct to the printer so that the outgoing paper does not fall on the floor - I can't figure out how to put this track in.  There is no drag, it does not fit on the tray under it.

  How do I put back it?

  

  I'm so happy to hear that you have it installed! Think about scoring the post that solved the problem like "accept as Solution" while other people with problems can find the solution!

  Thanks for joining the HP Forums, if you have problems or questions in the future, you know where to find us!

• I can't print from firefox. The paper feeds through the printer but does not print. The same web pages appear when I use internet explore. And the printer works fine with word, Excel etc, but not with firefox.

  Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• transport paper jam in the printer

  How can I pay for carriage jam in my HP printer {removed privacy} 6310xi. I triied every step of troubleshooting according to the tune

  There is a document with steps to help solve a problem of paper jam carriage in a 6310xi. The document can be accessed here.

  If the steps in the document does not erase the question, the next step will be to replace the printer as a hardware problem has developed. I hope this helps.

• Must press paper to get the printer working properly

  Printing problems...

  When we print from any computer on our P2035N printer must press the paper button so that it can work. Also, it will not print page 3 of one of our computers, he jumps just this page.  We have replaced with a new printer... even one and it has the same problem.

  Ask technical questions in the forum Feedback is useless, so I moved your post to the windows 'Hardware and drivers' forum.  Always include your version of Windows when you post.

  Messages displayed on the front panel of the printer?  This looks to me to an incompatibility between the paper type settings in the driver and the default type of paper in the printer and the printer is waiting for the type of paper correwct to load.  You say by pressing the button on the printer, the printer to use whatever paper is already loaded.  It could also be a mismatch of paper tray, with the pilot, indicating the printer to use a Board that is not loaded, or which does not match the default tray set in the printer.

• Printer was working fine, a lack of ink, he succeeded. Now the printer does not print.

  Printer was fine, a lack of ink, replaced ink, now the does not print from the computer.  It will print a test page for the printer.  He do not print on the computer.  Thanks for your help.  Max

  Hello

  You must check with assumption of the manufacturer of the printer, the online documentation and drivers and ask to
  their forums (if any) on the known issues.

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP 2512: How get paper off in the printer: HP2510

  Hi all, I think everyone has had this problem.  My printer does not print because there (with an adhesive backing) paper stuck in the rollers.  I've tried tweezers, my fingers, trombone, and it's so bad now, I can't even make the paper.  It is about 1/2 to 1 inch stuck.

  Does anyone have a solution?  Or am I doomed and just buy another printer?

  Published:

  I went to the videos and did all the steps, including the opening in the back.  There were glued paper (a label with glue), he pulled out.  There is always a piece little biddy stuck in the rollers that I can't.

  If I'm doomed?  Should I get a new printer?

  I decided to make a new printer.

  This problem is solved.