How the graph data are resampled pixels?

Similar Questions

• How the index data are managed within the cluster?

  Hello
  
  We are evaluating the consistency.
  
  Regarding indexes, am I right in thinking that the data in the index are stored in a (managed internally) cache on the same node that the attendant at the following indexed values? I'm not interested in getting the data in the index, but rather just to understand how the data in the index itself are stored or processed within the cluster.
  
  So in a 2 cluster node where an index is applied to a distributed cache that has only 2 entries, will there be a key cache on each node 1 {binary,} to enter key where the key points to the value that is stored on this same node? In other words, I'm sure that the index data to be spread out in the cluster in the case of a partitioned topology?
  
  Concerning
  Peter

  user11279467 wrote:
  Hello

  We are evaluating the consistency.

  Regarding indexes, am I right in thinking that the data in the index are stored in a (managed internally) cache on the same node that the attendant at the following indexed values? I'm not interested in getting the data in the index, but rather just to understand how the data in the index itself are stored or processed within the cluster.

  So in a 2 cluster node where an index is applied to a distributed cache that has only 2 entries, will there be a key cache on each node 1 {binary,} to enter key where the key points to the value that is stored on this same node? In other words, I'm sure that the index data to be spread out in the cluster in the case of a partitioned topology?

  Concerning
  Peter

  Hi Peter,.

  up to 3.4.x index have been supported only on partitioned topology, and Yes, the index on each node contain only the data corresponding to the entries that have their main copy on this node (referred to as entered local subsequently).

  The indexes are not stored in a cache, but they are managed under the information that maintains consistency in terms of backup (the map that contains local entries).

  The indexes are in 2 parts:

  -index to the front: this is a mapping of the cache key in an internal representation (Playback key card in the future) the value extracted with the extractor used to create the index of the entry to membership of the cache key (value extracted later)

  -reverse index (aka. reversed card): this is a map of the value extracted from a backup set of the keys of the map of entries which we extract the index key reversed with the extractor used to create the index

  The index can be sorted, which means that the index reversed a SortedMap (sort order is the order of the extracted values)

  Let's see an example. Assuming you have the contents of the following cache within a particular extension storage node:

  A--> Object (PositionX = 5,...)
  B--> object (getA = 3,...)
  C--> object (getA = 3,...)
  D--> object (getA = 4,...)

  The index forward in this node will contain:

  Binary (A)--> 5
  Binary (B)--> 3
  Binary (C)--> 3
  Binary (D)--> 4

  The reverse index will contain:

  3--> {Binary (B), Binary (C)}
  4--> {Binary (D)}
  5--> {Binary (A)}

  Where Binary (...) designates the internal representation (binary) of the... object.

  If the index is not ordered, then the order of iteration over the entries in the index reversed are not deterministic.

  If the index is ordered, the iteration of the entries into the inverted index will be as stated above. Also, you can convert the SortedMap inverted index in order to have the very useful headMap and tailMap and firstKey and lastKey methods.

  I hope this helps.

  Best regards

  Robert

• How to restrict the scope of the EU change when the input data are not available?

  Hi Experts,
  
  I have a user enter-able (EU) field in the Section. When the tag input XML contains data for this field, then the value must print in this area and it is not editable.
  If the input data are not available only that one time that the field of the EU must be editable.
  
  Any thoughts?
  
  I tried like below,
  
  Domain name creation: UE_CompName
  Length: 15
  Type: alphanumeric
  Rule: XDD
  Source name:! Transaction/Compname
  under PreEdit,.
  module: DALW32
  Procedure: procedure of desired
  Information: CALL ("UE_CHECK")
  
  like that, I've updated in the field properties.
  
  Content of UE_CHECK DAL below,
  
  CurrFieldName = Fieldname()
  CurrFieldData = @("CurrFieldName")
  
  IF CurrFieldData! = « »
  SetProtect ("CurrFieldName")
  END
  But it does not work... Pls help me to do this...

  I assume that the 'mapping' occurs during a batch operation (Gendata) through any rule the XDD defined for this field. In the batch, pre and Post Edit calculations do not. This feature is related to the WIP/entry. What you can do is to add a level section - PostImageDAL rule to call your script and protect your land once it was located batch of your operation.

  In FAP that contains that field, add the PostImageDAL rule in the property of the rules in the Section box. In the data box, do call your script.
  Your script is a bit wrong, it seems you were trying to get the 'current' domain name and then check the value of fields. Drop the part and simply name your field in the string in quotation marks in the @ () function and the SetProtect.

• How the binary objects are sorted

  Live treatment image "IMAQ particle analysis" and "IMAQ MaskToROI.vi" returns the characteristics of binary objects detected in a specific order. My question is how objects are sorted before results are returned.

  Look at the following example. I'm totally confused why two screws returned the second object in the first row first?

  I was trying to get the centers of each object (and their contours) and assuming that they were sorted by their positions on the y-axis first and then positions itself on X. It is most of the time, until you see here on the first line. What happened here? Why the second object is sorted as the first object? HOW the binary objects are sorted anyway?

  

  I got it. It has to be sorted by the corner up and left of the rectangle of the object.

• ORA-20001: APP-FND-02604: one or more of the following data are not valid

  Hello
  
  I use the fnd_user_pkg.addResp procedure to add the responsibility of self-service to a group of users with the script below:
  
  Start
  for e in loop (SELECT a domain NAME)
  -dbms_output.put_line (e.name); just to confirm the names are there
  fnd_user_pkg.addResp (e.name, 'BY', 'CBK_EMPLOYEE_DIRECT_ACCESS', 'STANDARD', 'CBK Employee Self Service', sysdate, null);
  end loop;
  end;
  */*
  
  
  eld table contains the names of users to add, in capital letters. When I try to run the script, it fails with the error:
  
  ERROR on line 1:
  ORA-20001: APP-FND-02604: one or more of the following data are not valid:
  APPLICATION_SHORT_NAME =, RESPONSIBILITY_KEY = CBK_EMPLOYEE_DIRECT_ACCESS,
  SECURITY_GROUP = STANDARD.
  ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72
  ORA-06512: at the 'APPS '. FND_USER_PKG', line 2713
  ORA-06512: at line 4 level
  
  
  However when I run the procedure of inserting a single user at a time, it ends without error. A popular thought.
  
  Dula

  Hello

  User_id = this will come from the fnd_user table?

  Fix.

  responsibility_application_id and responsibility_id = this will be retrieved through a query joining the tables?

  You can find it in the FND_RESPONSIBILITY, FND_RESPONSIBILITY_TL tables... See the site for more details--> http://etrm.oracle.com eTRM

  Thank you
  Hussein

• How the stamp date & time email with a photo

  I send a photo to prove I did not damage a rental car, but the stamp date & time are not displayed. How can I add them to the email please

  The recipient can also access the properties of the files you sent to them as well to confirm your screenshots.

  See you soon.

• Why the acquired data are not from min to max (DAQmxCreateAIVoltageChan, PXI-4472) values

  Hello

  I'm developing a program for the PXI-4472 acquisition on opensuse 11.4 device (linux 2.6.34).

  I try to acquire analog data and to read in a wav file.

  Configure the task of acquisition with the following functions:

  DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","OnboardClock",DAQmx_Val_Cfg_Default,-10.0f,10.0f,DAQmx_Val_Volts,NULL);
  DAQmxCfgSampClkTiming(taskHandle,"",48000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,48000);

  DAQmxDisableStartTrig (taskHandle);

  I don't understand why the data stored in the wav file are not-10V,-10V but-5V, 5V... (the value of the gain is 0dB). (Perhaps a scale of 0.5?...)

  Thanks for your help,

  Amandine

  You're right, in my example, I considered as unsigned data.

  Concerning

• How the packet data / * ($HOME /) files by using the bar - descriptor.xml

  Hi, using sdk native c / c ++ with playbook Simulator 1.0

  I want to distribute with my application some data files that likely should fall under the ' data /' ($HOME?)

  folder.

  (I've written / will update them sometimes, so app/native/does not appropriate I suppose.)

  in the bar - descriptor.xml, I tried adding them as an 'active '.

  who drops their bottom right in app/native / *.

  so I change the XML .bar to try to get them grounded in data.

  Here's what I found:

  by train: data/filename landed the file in app/native/data/filename

  try:... /... / Data/filename received the error

  by train: / data/filename received the error (hoping to slash leader was compared to the sandbox)

  I even on a lark tried: $HOME/filename, who literally created file app/native / $HOME!

  so he tried a ${HOME} with the curlies. I got an error saying unable to resolve the path variable.

  How can I get the data files in the folder/data ($HOME) using the .bar packaging?

  You cannot package the file into the data, you copy your files at startup, if they don't not exist your app/native/data for example

• Is there a tool to check if the appropriate data are insertion or not?

  Hello
  
  We have different products A, B and C.
  whenever the crates one user account in respect of those products of the X, Y, Z table is updated.
  
  If the util_1 create an account under a then X, Y, Z updated with data as well as some ID tables
  If the User2 creates an account under a then X, Y, tables Z update with the SAME DATA as well as some other ID
  
  Is there a tool to check if the appropriate data insertion (insert same data each time) or not?
  
  Thank you
  Praveen

  Is there a tool to check if the appropriate data insertion (insert same data each time) or not?

  Yes. It's called "Visual inspection of the results of a SQL query.

  Taking into account your needs (If user1 user2, then X actions then actions Y), the database is unable to validate data. You will need to write queries that present the data. Now you can visually the data.

  You can build a test harness (a set of procedures PLSQL) what to do the validation for you if the volumes are so high that you cannot visually inspect the data. The developers are the best people to create the test suite.

  Hemant K Collette

• How the creation Date to be later than the date of change?

  I am the review of records. (IE m4am, mp3, etc.)  When I open the Properties menu to see what date they were created, the 'Création' date is after the date of "modified".

  This is not unusual with the copied files, when you copy a file the file created date becomes the date of change and the current date (when the file is copied) becomes the date created, copy all the existing files on your computer and you can observe this behavior.

  John

• How can I view the history dates are not?

  History of 31.0 FF shows today, yesterday, last 7 days, June. On July 24, the day. How can I see my history for July 1 to July 17?

  There should be a folder for this month.

• The objective data are good, but the model is gibberish...

  I could really use some help here. My exif data (f-stop, ISO, shutter speed, etc.) are all correct, but the pattern of the lens is gibberish. It's not just with one goal. Please tell me how to solve this problem. I have a number of photos that have been affected and each picture is a 'lens' different - some of the same trip, some other trips.

  

  You will need to replace these files with the actual files of the original camera and read them again. If they are for a while there, it is unlikely that you still have. Alternatively, you can try to manually fix the exif, but it's a lot of work.

• When you import contacts from the sim data are all put under the wrong labels. Is there a way to avoid / repeat this

  The data on my phone is an example: it took my familyname as my name as a phonenr. And my phone number as an email address. So far I've found the manual update as a solution. It would be less painful to set on a desk somehow...

  In my case, it did not recognize same contacts on my SIM card.

  If you have contacts in vcard format, with export/backup to memory card on an old phone, or under sync your desktop and exported from there, you can use vcardin on the market to import vcards from a memory card.

  The phone still has tons of problems/bugs related to contacts; You cannot batch delete, for example. Many of these issues are already fixed in newer versions of Firefox OS, and others are included in the road map.

  For now, this solution took my 800 + contacts more or less correctly loaded.

• How the static methods are mocked in any mocking framework JMockit?

  I've learned that we can mock static methods using Basic with PowerMock java library? Jmockit.Want to understand how it does in short in-house?
  
  I think I understand:-as we define the mock class in the test case itself (although there are different ways to create the mock class in each frame as using a syntax of waiting in Jmockit), these framework must define custom classes thru Chargers that they should be looking for this class definition in the unit test is. Its an assumption. Not sure if this is correct? But even if I'm right, preference of classloader hirerchy is boootstraploader then applicationclassloader than customerclassloader. So, how's that search for customerclassloader instead of applicationclassloader? is there a way that we can set the preference of the customer above on applicationclassloader class loader?

  You can tell your not custom class loaders to delegate to its parent.

  Or you can give the custom class loaders a different classpath from its parent and place classes to be loaded by the loader custom only on the way to his class, and on the parent.

• Preventing the 'reset' when you change the graph data

  Hello

  being relatively new graphics Illustrator, I was wondering if there is a way to prevent the drawings of my graphics of "reset" whenever I have change their data? My numbers change quite often and having to go back and redo every time their designs can be very annoying. What do guys usually do?

  Thank you!

  Some tips really useful on this question in an article by Teri Pettit Mordy Goldings blog:

  http://rwillustrator.blogspot.com/2006/06/Teris-wisdom-graphs-that-Don ' t - stick.html