lights swipe_down, but swipe_start not

Similar Questions

• HP 5400 printer light blinks, but does not print

  HP 5400 printer light blinks, but does not print

  Hello theguttu,

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• BlackBerry smartphones after 3 days my flashlight died - red light shows but does not illuminate.

  I got my flame long enough to set up my e-mail account and run the battery down (about 3 days). I put the phone to charge for the second time and were not able to next turn to the since then.

  I use AT & T and have the Torch 9850.

  I received Dec 25 and not really turn on or start together until Dec 28 and used 28 Dec - Dec 30 when he ran down on battery and close.  I've loaded and charged and charged and I see the red light at the top right, but nothing happens. New years BB Bold 2012 ads just rubbed salt into my new year!

  Any suggestions on how to get this restart or do I have a lemon for Christmas?

  1. remove the battery

  2 - Set your phone on the charger with the battery removed

  3 reinsert the battery

  bottom white-4 with a clock as the picture shows (not a problem)... after a while, that he will be gone and you can reuse your blackberry

  5 - let it get completely reloaded

  hope that it works because my friend had the same problem after that the battery has been completely drained!

• DeskJet 3052. screen lights up but does not show words or options.

  I can't choose copy or scan or other options because I can't tell what buttons to push.   Suggestions?

  Hi there lunchthyme,

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  Good luck!

• HP Laserjet 1018: Printer light blinks 15 times but does not print

  I have 2 printers, my work horse HP laser jet and a Brother Multi printer/scanner/fax etc. Both printers work correctly when connected (usb to LJ1018 connection) or wireless (Brother MFC) to my notebook running windows 7 lite.

  My desktop HP compaq core 2 duo machine is connected to two printers with the help of a brother network cable and a usb cable for the LJ1018 but I decided to connect the brother wireless to my network, because it allowed me to use my netbook without having to plug in a usb or network cable. I also created my office to connect wireless to the brother and it works fine, but now I find that I can not use the LJ1018 that I think only has a usb cable connection. Although the computer says the printer is connected it is flashing the light several times - about 15 but does not print anything. I tried to reinstall the USB driver but this makes no difference. One thought I have is that Windows XP cannot deal with a wireless connection, but also a connection usb, if yes can I have go back to wired connections?

  Hi @petec48,

  Personally, if it is not broken, do not fix.

• I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer.

  I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer. Or my computer will recognize any device connected to the usb port. I tried another ipod to check the usb ports work and they are. Ive run out of ideas. help please

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My screen saver is set on various photos & first, they light up but they will not stay running

  Original title: screen saver

  My screen saver is set on various photos & first, they light up but they will not stay running, the screen goes black & I do not turn off my computer. I want pictures to be constinltly running.

  Hi mel merrill,.

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do the computer in sleep mode?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Windows Photo and slideshow problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2

  If the previous step fails, then you need download and install the updated drivers for the graphics card on the computer by visiting the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried several times to contact support, but have not been able to get well. I wanted to try the room light I use Capture 1 now. The Downloader or installer will load only if I "Run as Administrator" and then it crashes every time within a few secoun

  I tried several times to contact support, but have not been able to get well. I have a trial (try actually the second time), but are not yet able to test Lightroom/CC. I wanted to try the room light I use Capture 1 now.

  My question is this: the Downloader or installer will load only if I "Run as Administrator" and then it crashes every time in seconds. I even tried the Adobe application that will go well and remove all the remains of the previous software hoping that he would, but no solution. It will continue to act as his footstool, consumption of RAM, but do nothing else than the loop on the same screen. I have to force quit the program so that he could even respond. I'm a little confused on where to go with it. Thank you!

  Windows 10, 16g RAM, 4.7 GHZ 8-core AMD AMD R9 270 X

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• High XP desktop keyboard, lights up but not be connected or exploit - all solutions

  Keys may be depressed, but will not register on the monitor.  In addition, does not appear on the list of legacy.  Tried to download a keyboard driver

  miscrosoft, but has no effect. My Dell XP is probably 5 years old, and I bought their best keyboard in time.

  Hi WGBrose,

  1. Did you the latest changes on the computer?
  2. What is the number and the model of the keyboard?
  3. When was the last time it was working fine?
  4. What happens when you connect the keyboard to the computer?
  5. You are able to access the other USB devices on the computer?

  I suggest that you test the keyboard on another computer and check if it works.

  If the keyboard works on another computer, then I suggest that you remove and reinstall all USB controllers, for more information, see the article and check if it helps.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

• Satellite A300-1 M 1 - skates from CD/DVD, makes noise but does not read the CD

  I own a laptop Satellite A300 - 1 M 1

  He reads some DVD, windows media player or VLC, but fails to read CDs and many DVDs

  The drive is recognized in Windows Vista. I updated the drives and rebooted. Then removed from devide Manager and rebooted. The removal of the UpperFilters and LowerFilters registry and restarted it again.

  The problem is it exactly even. I can read a DVD (DVD movie) but not a CD (with data). I can read both disks on a different laptop.
  When I insert the DVD, the disc spins and in few seconds it appears in windows Explorer and can be played with Windows Media Player or VLC, for example. When I insert a CD with the data, CD towers, there is slippage noises, at different speeds. The mouse cursor changes briefly shhowing a disc below it, the orange light flashes, but after some 40 seconds or so only a message appears "Please insert a readable disc. Needless to say, I tried several different CD. Only DVD movie I managed to read on the player.

  The drive is listed on the device as a Manager:
  HL-DT-ST DVDRAM GSA - T50N

  The CMN Satellite A300 - 1 M 1 are:
  Intel CoreDuo P8400 2.26 GHz
  4 GB OF RAM
  I'm using Windows Vista (as it was installed on this laptop)

  What can I do to fix this?

  Hello

  I think that there is not much to buddy
  I think that it s a CD/DVD drive problem
  There might be something wrong with the lens of laser disk or disks are not totally compatible

  You could try burning the disks on another computer and could attempt to read copied discs

  Otherwise you will need a new CD/DVD drive

• 15-p151nr Pavilion: Pavilion 15-p151nr dead, power supply LED flashes 3 times but does not start

  With or without the adapter is connected to the computer (well known socket), the computer will not turn on.  The LED located on the left side of the computer where the socket is attached blinks 3 times (white), but does not supply power to the top.  Another post I saw said "continuous" flashing would be the power adapter, but wanted to ensure that it is in fact the problem before buying a new...  Any help would be great!

  Hi @joshuaj21,

  Welcome to the HP Forum!

  It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more

  I understand that the computer will not turn on. However, when you connect the AC adapter of the power port light flashes 3 times.  Please check that the power cord is not one of the recall. HP laptop AC Power Cord Safety retirement program and replacement announced August 26, 2014 .  You use a power bar?  Have you tried a different outlet? Here is a link to the HP laptops - tests and using the AC adapter which can also help.

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos. : catvery-happy

• Satellite A210 - 171 (PSAFJE) - powers but does not start

  Hello

  I hope someone can help me. I have a satellite A210 - 171 (PSAFJE). When I press the power button, the blue satellite lights text at the front left lights up, the light blue power (O with a top vertical bar) the HARD turns, the clique CD/DVD drive on a couple of times and its orange light flashes but nothing (BIOS and POST) is displayed on the screen.

  The battery and the power supply are fine.

  I tried to fix a screen of stand-alond without result.

  The CPU HSF seems to be spinning and blowing air on the side.

  I removed the HDD SATA and attaches to a desktop system - it reads and looks quite good.

  I reinstalled the SODIMM - in fact, I removed the and then replaced them, everyone in the slot on the other.

  When powered, if I press on the "* FN *' & ' * F10 *' keys together, the indicator below the F10 lights & stays on until I repeat the sequence of button.» This happens not with ' * FN *' & ' * F11 *'.

  I downloaded a * + Satellite A210/A215 Satellite Pro A210, Equium A210, Satego A210 Series Maintenance Manual + * (first edition may 2007) but the instructions for * + remove the keyboard + * do not appear to be correct and notes to open the laptop (to have a look on the system map) say you must do this first (and appear not to be accurate in any case).

  Someone has an idea what more I can do, what might be the problem or where I can get the valid instructions for opening the case?

  Thanks much for any help.

  Post edited by: surv1v0r

  > Someone any idea more I can do, what could be the problem or where I can get the valid instructions for opening the case?

  In my opinion, you did all that would help determine the possible fault
  I would check also the RAM and the HARD drive first, it seems that the HARD drive is ok and that the RAM modules are not the problem. I don t think that the two modules of RAM might be bad at the same time, so I think that the problem can not be linked to the faulty RAM.

  It is possible that the CPU or the motherboard is affected, but in this case, some diagnostic tools are needed that would allow to obtain more details on the affected parts

  But this can be done by a technician of Toshiba ASP so what to say that sounds like a serious hardware problem (motherboard, cpu, etc.)

  But try this: unplug the power adapter, remove the battery and leave the laptop disconnected for a while and then connect the two parts and try to turn on the laptop

  If this is not enough, it helps technician ASP would be necessary

• I am able to scan, but unfortunately not able to print on the printer DJ1515.

  Original title: Do not print to the printer.

  My DJ1515 printer after the success of the download, I was able to scan, but unfortunately not able to print. Need help how to solve this problem. Thank you

  You need to provide a little more information... and it is unclear what you mean by "after successful download" even though I think you mean that you believe that you have successfully installed the printer.

  Is your printer: http://h10025.www1.hp.com/ewfrf/wc/product?cc=lamerica_nsc_carib&dlc=en&lang=en&lc=en&product=5385208 (this model seems to be sold in Latin America and the Caribbean)?

  What version of Windows (XP Home, XP Pro, etc.) and service pack (none, 1, 2, 3) do you have?  Do right click my computer and select properties for info.

  Your printer is connected to your computer by USB, correct?

  When you installed the printer did you leave the printer NOT connected until you are prompted to connect by the installation software or did you first connect the printer to the computer and then install the software?

  What happens when you try to print? If you get an error message, please provide the full text without paraphrase.

  Please describe the status of the lights on the front of the printer (on/off/flashing).  Lights are on 1, 5 and 6 in the figure below:
  

  Click Start > printers and faxes
  Is there an icon for your printer?  If Yes, it looks like the following (except with the name of your printer instead of "hp Laser Jet 1300 PCL" 5th)?

  
  It's

  • Is there a circle with a check mark?
  • Is there a 0 in the second row?
  • The third line says 'ready '?

  What happens if you right cliquer click on this icon, select properties and then click on the button "Print Test Page"?

  What happens when you follow these steps:

  • Click Start > all programs > HP > HP Deskjet 1510 Series > Series HP Deskjet 1510 (note that the wording in your Start Menu may show instead of 1510-1515)
  • When the printer software opens, click on 'Print and scan' and then click on "maintain your printer.
  • When the printer Toolbox opens, click on 'Print the diagnostic information' in the tab 'device reports.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.