How the interface with my RND4000?

Similar Questions

• How the interface with a multimeter Keithley 2000 using LabVIEW

  
  
  

• How the coil with the variable?

  I need the motion of the coil with the variable filename.
  Concept as below:
  

  select HOST_NAME||'_'||INSTANCE_NAME||'_'||to_char(sysdate,'YYYYMMDD_HH24MISS')||'.txt' as Filename from V$INSTANCE;
  
  SPOOL c:\&Filename;

  When I run this script it will ask to input 'filename '.
  
  Please suggest.
  
  Kind regards
  Suradech

  There are many examples to achieve...

  http://tinyurl.com/2f7ukdr

  However, why the spool SQL * more to get an outing in the files, when you can export within PL/SQL to achieve the same and then dynamic file names making is really easy.

• How the interface telnet or PuTTY or plink software Windows with LabVIEW

  Please find the screenshot attached screen of the problem that face here.

  He is, can't open the telnet session by using the IP address of the DEVICE. But after that am not able to send commands or argument to the PuTTY or plink.

  Exec System does not accept standard input.

  In the plink.exe screenshot began operating only after sending to put manually... and after getting invited ">" if I send the command 'SEND' to plink.exe he answers returns with the data of the unit.

  Here I am not able to automate this send command Enter and SEND to get the data of the unit.

  He will be grateful if someone give me a solution.

  Thank you

  Vijay

  I solved this with Telnet VI by adding \r\n for all orders that we send to the unit.

  Pls find the attached final VI in LabVIEW 8.6

  Concerning

  Vijay

• How the mxf with 8-track stereo?

  Two pairs of first with sound, remains empty. I now how to do 8 tracks, but it is EQ them so I have a stereo pair but the two strings are identical. I'm doing it by audio setting as 'multichannel' with 8 channels... but that is false, as I guess.

  Definition of the properly configured sequence is a necessary first step. Then, if your source content does not match the audio settings of the sequence, you must remap the audio to work with the sequence. For example, if your source clips are stereo, you need them with the right button in the project Panel, select Edit > Audio channels and change of Format of Mono channel and the number of Audio tracks to 2 - before you add clips to the sequence.

• How the EditField with scrolling

  How can I make the my CustomeditField scrollable?

  Hello

  Take a look at this link

  http://NA.BlackBerry.com/eng/devjournals/resources /journals/jul_2005/creating_textbox_field.jsp

• Where to get the interface for 500 GB drive HARD USB3

  The USB connector is damaged, one of the bent pins.
  It does not seem to have the expected SATA interface where I could use a different case.

  It seems the only way to power and the HARD drive inside the interface, with a Toshiba pcb which includes USB 3.

  Can someone tell where I can get one I have many ion of the data on the drive that I can't access?

  If I understand you right all what you need is new USB cable, no?

  Googling around, I found many online shops, including offers on eBay where you can simply order cable USB 3.0 portable hard drives from Toshiba.

  You will find the order in your country too?

• Can someone explain please the icon with a check mark phone in iTunes.

  I would just like someone to explain to me how the iphone with the checkbox icon in iTunes on my phone

  See you in iTunes (on the Mac screen)?  Can you explain more in detail when you see it?  There is little 'touch' on the horizontal bar in the iTunes window, but this probably isn't what you describe because there is no "tick" here.

• Vista attempts to save a non-existent address on the interface.

  Every 10 minutes, event log reports "MYBOOKWORLD: 0 ' cannot be registered on the interface with the address"A ". The computer with the address "B" did not allow the name to be claimed by comouter B. I can't stop this error does not happen every 10 minutes. The MYBOOKWORLD works well and it has a wired connection to my local network. I don't know where to go from here.

  The summary event indicates the source of this error is 'netbt', the event is identified as "4321", level is "Error", and user is "N/A".

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Inside the interface of access IPSec on PIX

  Hi all

  I need advice with the following problem.

  I have PIX 515E with 3 interfaces inside.

  DMZ and outside, to 6.3 (3). Is it possible to access DMZ more inside the interface with IPSec of CISCO VPN client? IPSec creates a tunnel, the customer

  has a new address of the address pool, but

  in the paper, I have a message: not found translation etc... When I try to

  reach any device in the DMZ. The reason seems

  be with nat (dmz) 0, which should be inside the DMZ (social security social security 50 0). Even if I use nat (dmz) 0-list of remote access apart from it does not work. Any tips?

  Thank you

  Zdenek

  Hello

  Can you check if you are able to access the DMZ from the inside? If so, then u shud be able to access DMZ to connect remotely. This is because once the VPN client obtains the IP address of the inside pool, it's as good as he is in your home LAN. You can try putting inside DMZ natting... I mean put this command nat 0 because inside the DMZ, which will allow access to DMZ devices inside.

• Œuvres of VPn on the inside of the interface, but not outside

  I have a PIX-525 with UR license.  I tried to get my VPN to work since my iphone over the weekend, but nothing helped.  Then, I changed the interface inside to see if my iMac could connect and bingo!  It worked.  I then tried to log in via the inside of the interface with my iphone and it worked.

  I have connected a PIX-515e and, using the same settings, can connect to the external interface via my iPhone.

  Strange.

  Now, to answer the pressing questions, yes I changed the IP address of the server in my client IPSEC settings to reflect the external and internal interfaces I was testing each of them.  I was using a pré-partagées secret.  Yes, the secret has been entered correctly and they have all matched... Yes, the name of the tunnel has been entered correctly.  I used the database local user for authentication with username/password name (i.e. no certificate of authorization to make things simpler for debugging).  I changed the syslog to debugging and I see absolutely no error when you try to connect my iphone to the external interface (i.e. turn off wifi so I'm on my 3G data network).  The only thing I see is where my iphone hits the external interface and it's disassembly (or whatever his name is) but that's all.

  Why this work like a charm with my PIX-515e and not my PIX-525?  VPN accelerator card in the 525 can be at fault?  The 515e doesn't have the aecellerator card.  No idea why can't I several a VPN connection inside the interface but not outside?

  Hi Tim,.

  Well it's not so much the DNS rewrite that is the problem (if you delete just the keyword dns VPN will still fail) but using the external interface for NAT. So all traffic intended for your address of the external interface is passed to the "gcbrouter", including vpn traffic.

  I'm thinking about a way to solve this problem, but I really can't find anythign right now. Using a different interface will not work because you can have only a single default route.

  I wonder if this would work:

  remove the NAT interface:

  not static (DMZ, external) gcbrouter netmask 255.255.255.255 dns interface

  Replace with PAT interface, i.e. add such a line for each port that you want to be contactable on the DMZ server:

  static interface tcp 80 gcbrouter 80 netmask 255.255.255.255 (DMZ, outside) dns

  static (DMZ, outside) of the 25 gcbrouter 25 netmask 255.255.255.255 tcp interface dns

  etc.

  In all honesty, I have never seen rewriting dns used with PAT so not quite sure if it will work.

  HTH

  Herbert

• How is it that I can ping between ESXi vmkernel interfaces with the sizes of package exceeding the value set in my passage upstream and one located in my vmkernel port group itself?

  
  I have a 10 GB dell powerconnect 8024f the switch and the firmware is OLD, but the port config shows maximum frame size = 9000 to all cable ports

  2 guests ESXi 5.5 wired, build 1331820, put each host computer network is managed by a single port dual qlogic 8150 ANC

  When I connect to my windows VM to check my new 10 GB connectivity (it is configured for jumbo mtu = 9000 frames) and ping-l 8190 against ESXi vmkernel interface that was MTU of 1500, I get an answer without any packet loss... How can it be if the port is configured for only 1500 MTU?  I thought that the two vmkernel port group and vswitch properties must have 9000 mtu defined, it appears that the vswitch properties override the port group properties.

  But I know I must be missing something, a few important concepts, somewhere, because when I connect to ESXi via ssh I can ping devices with values greater than 8190 and not just windows virtual machines that reside on the same host where the ping uses the internal bus, but I am referring to the connections of the host of other ESXi on the switch management.

  In summary - how the VMkernel does ping and response to pings of bigger sizes greater than the value of the switch upstream?   and why do ping with large packets get answers when the vmkernel port group is always set at 1500, is this a bug or is this feature obsolete?   I remember specifically in ESXi5 that I had to configure the vmkernel port group and the vswitch for this property to work.

  Unless you specify "Don ' t fragment" (-f for Windows) you will be able to use any size package successfully.

  For ESXi, take a look at Troubleshooting ESXi Jumbo Frames.

  André

• How to set up a chart and store data points in a table to allow me to do the analysis with him

  Hello

  I am relatively inexperienced, with the help of labview and I try to do the following with the help of an oscilloscope Tektronix TDS 2001 C but have no idea how start.

  (1) load a previously saved regarding the volts/div and setting s/div on oscilloscope

  (2) pass everything that appears on the o-scope on my computer screen

  (3) save the data table so that I can do a scan with it

  I watched some of the diagrams of block of example provided with the driver I downloaded for this particular unit but am still very confused.  Any help would be greatly appreciated

  Hello Chron0,

  I know I guess a little here, but have you downloaded a specific device of ni.com/idnet driver?  This is a good place to find the built-in drivers for third-party devices, and there is one for this particular model.  That being said, when I looked at the examples in the downloaded zip file, I saw a couple of predefined options that look like they should satisfy question #2 of your project based on the method to use to acquire a waveform (permanently, several waveforms, etc.).  Similarly, in the Public folder is a configuration of channel VI which I think should satisfy what you are wanting to do to the #1 question.

  Depending on what you are willing to do data analysis, with regard to the software used, functions, etc., there are several reporting tools in LabVIEW which will allow you to save the table and manipulate later. A good place to begin with, it will be to search for "File i/o" in the search bar helps LabVIEW and select the option under the heading "Palette."  There are several options here that I think might be useful, including writing in the file.vi worksheet.

  It will be also good to be familiar with the Finder example OR in LabVIEW.  There are examples of spreadsheets / saving data, as well as VISA, which you can do some reading on, because the interface VISA, it's how you communicate with this device (Fortunately, the driver already download it!)

  Good luck to go ahead and keep us informed here on your project!

  -Dave C

  Technical sales engineer

  National Instruments

• Integrate the ICB with web interface

  Hi all

  We already have a CVI writes to order any of our instruments. We must develop a web interface to pass parameters to the CVI. In addition, currently the data is generated by the BCI as .csv files. What more we need to do is to transfer the data to a database as well. I did some research and discovered that Measurement Studio provides a .NET environment to control instruments. In addition, I think that the CVI/SQL Toolbox should be able to solve my problem of database. My question is who will Measurement Studio I want to integrate the CVI already present and communicate with him using a web interface? If so, what me does establish this communication?

  Thank you

  Kanu

  Kanu,

  Unfortunately, there is no easy or good way to create a web interface with CVI directly.  You can do this in Visual Studio with Measurement Studio, but you will at least need to the professional edition to do because you want to use web forms.  There are some resources with more information on the web forms, including this Walkthrough.

  Since you already have an investment in CVI, I don't understand why you don't want to throw just as work on.  According to the works of your code, you have a few options on how you try to bring together these two languages.  You can try to make your C code in a DLL and call it in the .NET application, as in this discussion of the call to invoke from managed code.  However, a better solution would probably be to use Of network Variables to communicate between the two programs.  Then, you can limit the .NET application to be mostly just a control interface that writes to the network variables, which are then used in the CVI program that you've already written.

  Hope this helps,

  Jen W

  Technical sales engineer

  National Instruments

  NI.com/support

• How can I specify VISA as the interface of the wizard of IVI instrument driver?

  After a long hiatus and to reinstall on a new hard drive, I resumed an IVI driver development. Previously, when I experienced, I was able to generate a driver that uses the API of VISA.

  Now, on this new installation, when I start the wizard, the only choices I have are Gbspecifications FOR, serial and VXI (message and registry).

  How can I specify VISA?

  Hey Frog,

  As this measure Studio LabWindows/CVI Instrument Driver Developer Guide , VISA i/o interface is the mechanism through which the pilot communicates with the hardware of the instrument. The IVI Instrument Driver Wizard allows you to only select among GPIB, VXI and series more specify the interface for your instrument.

  I hope this information helps!