How the mxf with 8-track stereo?

Similar Questions

• How the interface with my RND4000?

  I'm a replacement IT here. I have almost no notes to work from, and I've never used a SIN.

  How the interface with my RND4000? I tried to put the IP address in a web browser and you get "unable to connect".

  I think the NAS is supposed to be "hosted" on one of my servers. How to determine what is the server?

  Hello Helpdesk-Kerry,

  Then, it should be accessible. Perhaps, try another computer if after restarting it does not open yet?

  Kind regards

• How the coil with the variable?

  I need the motion of the coil with the variable filename.
  Concept as below:
  

  select HOST_NAME||'_'||INSTANCE_NAME||'_'||to_char(sysdate,'YYYYMMDD_HH24MISS')||'.txt' as Filename from V$INSTANCE;
  
  SPOOL c:\&Filename;

  When I run this script it will ask to input 'filename '.
  
  Please suggest.
  
  Kind regards
  Suradech

  There are many examples to achieve...

  http://tinyurl.com/2f7ukdr

  However, why the spool SQL * more to get an outing in the files, when you can export within PL/SQL to achieve the same and then dynamic file names making is really easy.

• How to reconnect the footage on the timeline with deleated track: audio or Visual?

  If I delete an audio track, then open the source I have a hard time finding a way to link the audio in sequences with reset them the points of entry and in the source bin file, I have several cuts camera roll and when to open the source file - can't seem to use the points for selected editing the thing out I'll try to get back with audio and with to set the points again and again the mounting (long sentence right?)? tried searching for an answer, landed here... J

  I'm not sure what you mean, but for re - insert either video or audio clip in the timeline panel is easy.

  1. Park the playhead on the clip in the timeline panel

  2. make sure that the track selector box is highlighted.

  3. press on 'X' to select the item.

  4. press on 'F' for match frame.

  At this point your video should appear in the monitor source with in and out already defined.

• How the EditField with scrolling

  How can I make the my CustomeditField scrollable?

  Hello

  Take a look at this link

  http://NA.BlackBerry.com/eng/devjournals/resources /journals/jul_2005/creating_textbox_field.jsp

• How the words space or track letters to use in ePub files?

  I adapt to a collection of books - already designed in Indesign and already printed - for another team which is the conversion of ePub using Dreamweaver files, there are no epub export option in ID.

  Some of these words are capitalized, but lack the necessary follow-up.

  How to treat them in Dreamweaver?

  Thank you

  Hello

  LetterSpacing is obtained by using the css letter-spacing property, see-

  https://developer.Mozilla.org/en-us/docs/Web/CSS/letter-spacing

  However if you only support epub3 and using open type fonts, then you can also use the new font feature setting or property of kerning to police.

  http://dev.w3.org/CSSWG/CSS-Fonts/#propdef-font-kerning

  http://blogs.msdn.com/b/ie/archive/2012/01/09/CSS-corner-using-the-whole-font.aspx

  PZ

• How the interface with a multimeter Keithley 2000 using LabVIEW

  
  
  

• Can someone explain please the icon with a check mark phone in iTunes.

  I would just like someone to explain to me how the iphone with the checkbox icon in iTunes on my phone

  See you in iTunes (on the Mac screen)?  Can you explain more in detail when you see it?  There is little 'touch' on the horizontal bar in the iTunes window, but this probably isn't what you describe because there is no "tick" here.

• How to export a MXF with 4 audio tracks. Original stereo 1 and 2 and the other stereo language 3 and 4?

  Hello

  So my question is in my title.

  I provide a MXF for a local television station. They ask me to create a MXF with audio 4 channels - 23LUFS.

  First, I create my sequence, I put 2 Adaptive audio track with my audio file. But when the first to export, it blends all my audio track and then give me a MXF with busy channel 1/2 and 3/4 empty.

  I need help :-)

  I am grateful for!

  so not an audio export 4 channels would require a sequence adaptive audio 4 channel?

• How to complete the two channels of a stereo track in a mono track?

  I have recorded on the L channel a stereo recording with the interviewer and the interviewee has recorded on the channel of a. I applied the two fill 'right' and 'left fill' to the runway, then cut and switch between the two, when appropriate. However, when they are all two talk, I'd like that the two channels to be active, but not as a stereo track (because otherwise the sound is actually mono) and turning on the two "fill right" and "fill left" at the same time seems to feed each channel at 50% instead of 100%, at least that's what I guess since there is a significant drop in level.

  Any suggestions? I'm on CS6.

  OK, here is the solution I've worked.

  I created a new track to mono submix at the bottom of all my songs. In the Audio Mixer Panel, I remapped my stereo audio track to go to the mono submix track before going to the master. This forces all the audio out as that mono the end, which is exactly what I was looking for.

  For what it's worth, one track stereo padding right or double left audio and is stronger then the railway normal stereo, even if she plays two audio channels, they don't add to the intensity of the double mono. I just applied a + 4dB gain stereo sections to compensate for this.

• How to solve the problem with slow import mxf files exported from first cc?

  Hello!

  I'm working on the first update to 7.2, on 64 bit, windows 7, and I have a problem with the import of the MXF op1a (IMX 30 PAL) files that I exported from first.

  MXF Import blocks especially first, but when he's not, it takes a long time to import (10-15 min).

  I tried editing ContributeQ but again, it hangs / takes a long time and I can see only a black screen.

  I installed a new copy of windows on this computer with everything clean, but it doesn't seem to work.

  Is there a software patch or way to go around for this problem?

  Whenever you have trouble with this, reduce the number of influences of others on your system.  In this case, delete TotalCode and see if it behaves better.  If it does not remove the device from BlackMagic and uninstall the drivers.  If one of these steps will improve performance, check with the third-party manufacturers.  There may be a setting or an update is necessary so that your system works correctly.

• Logic Pro - mixture with 1 track in the Red?

  HI folks, I'm just learn to mix and have my song sitting close to the way I like it, I kept all not too high and have used EQ on most of the tracks in my mixture to eliminate some UM and stop the instruments to be buried, however I have noticed that one of my main instruments arouses in the red in about 3.5 in the channel strip. I want to know is this a bad thing and it will cause problems when sending to the control?

  My main stereo output track is of approximately - 3db to leave enough margin, but if one of my pieces of lead is in red, it means that the track is cut?

  I tried to reduce it then becomes lost in the mix and tried to reduce all other tracks, but it does not really help. The FX only I have on it are Silververb Reverb and an EQ that does not have the massive peaks or win. I tried to add a compressor but don't know exactly how to help?

  Any help would be great and as always, thanks in advance!

  Red is much too much output, you cannot unclip a track, try adjusting your entries, you can 'tested' red when you blow of eye, but you don't want t keep it there. Play your song and adjust the levels until you just graze red to your strongest part and the rest of the track remains under the brand. Once the game you can save, now play the same thing you just did!

  also consider verb and post recording eq if you have not already, it will give you much more flexibility on the road when you mix, the less sleep you when you save the more effects you can add later, there are exceptions, but when the reverberation of the recording is not your friend, reverb is false whiskers for little boys or heels high MOM for girls to parts of the raw (Stephen King) that You can save and then add it later. You think that Hendrix went into the studio with a wall of effects boxes? That the strung a right-handed Stratocaster was left-handed and a plexi Marshall to have up to 10 with mic's all over the room, and he was wearing baseball cleats! (Eddie Kramer / me, speculating)

  If you have too much UM

  (1) turn on/down an overhead lighting, especially if you use a micro single coil.

  (2) try a different collection or watch in what you can do with what you have (single coil pickups are magnets noise when it comes to ground), some guitars are just dang noisy.

  (3) to adjust the gain of the amplifier, or your effects while it's fun to look like Tony Iommi and Max Cavalera and Brian Hayner to giving birth to a new distortion pedal at the same time, it is difficult to capture without sounding like a giant Bumblebee until you get the hang of recording.

  (4) to consider an external suppressor or see this document

  https://documentation.Apple.com/en/LogicStudio/effects/index.html#Chapter=4%26se ction = 10% 26tasks = true

  (5) a compressor can be used before or after mixing, as all the things you just plug in and walk away.

  http://www.PremierGuitar.com/articles/21690-the-recording-guitarist-dances-with-compresseurs

• How to DIVIDE a TRACK STEREO L & R CHANNELS INTO TWO MONO CHANNELS

  Does anyone know if this is possible: how to DIVIDE a TRACK STEREO L & R CHANNELS INTO TWO MONO CHANNELS?  There must be a way, but I can't find how.

  I recorded a podcast - me and a guest, with each microphone goes to its own mono channel. When I opened it in hearing he mixes in a stereo channel.

  Thanks in advance for any help.

  Best,

  Shawn

  Once you have opened the file in the waveform editing view go to menu Edit "excerpt from the channels to mono files.

• How can I retrieve the voice of a track to use as an acapella?

  Hi, just like the title says I would like to know how to extract voice from a song so I can then use it as an acapella with Audition CS5?

  Also while I'm here, using audition CS5, how can I determine the tempo of any audio file, I opened, and also how can I so to match the bpm of another sound file to match the bpm of the track I'm trying?

  Thanks for your time

  Dan

  Your success with the voice of a song of isolation depends almost entirely on how the song was mixed and will vary widely.  There is no perfect solution, well repeatedly artifacts that remain can be reduced in a mixture.  Generally, you'll have the best success with the music where the vocals is panned to a specific location in the mix - usually dead center, but the tool can be used to isolate any position in the stereo field - without too much instrumentation to expand in this area.  Bass sounds are usually mixed Center as well, you may need some additional EQ or lower frequencies spectral removal after completing the stage of extraction.

  The tool you'll use in Audition is the effect of Center Channel Extractor , located under the Effects > stereo imagery menu.  Start with the preset Acapella , then change the setting from custom for additional control.  Select the region you want to isolate (it is often preferable to isolate the parts separately as, for example, the verses can be mixed very differently from a choir) and start playback with the open effect.  Use the power to temporarily circumvent the effect, so you can note the differences.

  Adjust the settings of phase shift and Pan to maximize singing with minimal instrumentation.  Use the bandwidth settings to help reduce some of the low-end and high-end mixture that is not associated with the voice.  The two vertical controls on the right allow you to adjust the levels of what is being isolated from all the rest. (Toggle to make a Karaoke mix.)  On the tab of the Discrimination , the most important parameters will be Crossover bleed and Discrimination of Phase controls.  You can set the parameters of the FFT on the Advanced tab, although I wouldn't recommend it until you are comfortable with the tool.  Must necessarily know exactly what that never parameter, but listen carefully while you make adjustments and you will begin to understand how each setting affects the result.

  

• How the * fact pick from Microsoft that they deal with the problems of software?

  OK, so I just got a phone call from people "Microsoft" Software, saying that there is crazy with my computer problems. The person who I understand only thanks to a focus then directed me to look at the event viewer, so I could confirm a problem with the software, the person went to a lot of boring details about the problem, then directed me to go to https://secure.logmeinrescue.com/Customer/Code.aspx which i then did and after reading very naively all and not have noticed something wrong I gave on my laptop to be remote controlled, which resulted in the person taking me to this site http://www.pcsoftwareservices.com/ then this http://paymentgatewaynias.com/pay.php as if the person was going to force me to pay for something, I can't afford right now. And the person on the phone several times to say 'If you don't do this your laptop will be blocked for life. The person asked me if I had a boyfriend who has the credit/debit card I could use to pay 'Insurance' and if I had not noticed what was going on on the person to remotely control my computer would have gone through all the videos of my webcam. Therefore I had to unplug my laptop and shut down my computer, because even if I tried to control my mouse "technicians" are the one who had the most control. So my question is how the * does the person get my number, know so much about my computer?

  Hey, Viktoria,.
  I'm sorry to hear that you were almost scammed. But I'm glad that they didn't get away with your money. The one who called you, it's NOT a part of Microsoft at all.
  (It's actually a big scam keep us track of, but just as the Prince of Nigeria offering you millions, for everyone that we're closing, two more replace it).
  Defend your self with knowledge of this scam and how it works! Also I see that they did not have access to your system for a short period of time, I think it would be best to run all necessary safety programs, this thread has a lot of good advice. I personally use Microsoft Security Essentials and have yet to have whatever it is slipping by.
  Also if you save your passwords in your system, I think it would be a good idea to change these, I don't want something else goes wrong, and again, I'm sorry that you had a bad experience, but fear not, they are not Microsoft :)
  Thank you for using Microsoft Answers! I'm moving your thread to the section Windows security now that we understand what really happened.
  If you have any questions, we have a wonderful community here who would be happy to answer those for you.
  -Robert P.