How to abort Planar Tracker when the 'Cancel' button is gone?

Similar Questions

• When you click on the Cancel button, avoid running query

  Hello
  
  I'm going to the jsff a page to another at the click of a button
  
  In the second page I go back to the 1st page when the Cancel button is clicked
  But when clicked on this button cancel my request get rerun and takes a long time to come back on the 1st page
  This is a read only vo interview... How can I avoid running query on a button click Cancel
  
  Thank you

  Real question is: "why is your query run when you press the Cancel button?
  If your application is already running on the first page, this should not happen unless you:
  -to perform an operation on the Cancel button that runs the query
  -changed "Refresh" of your iterator property
  -perform rollback

  Dario

• Disable Validation on the Cancel button

  Hi guys,.
  
  I use jdev version is 11.1.1.5.0.I have done a validation custom for my Palm/editable grid table which i m, saving data on the button, click Save. Validation works perfectly except when I click on the button cancel next to my button 'save' his also validate grid table than i do ' t want to do.
  any suggestion how I can stop posting on the Cancel button.
  
  
  < af:table value = "#{bindings.ssku1.collectionModel}" var = 'row' "
  Rows = "#{Bindings.ssku1.rangeSize} '"
  emptyText = "#{bindings.ssku1.viewable?" "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings.ssku1.rangeSize}" rowBandingInterval = '0' "
  selectionListener = "#{bindings.ssku1.collectionModel.makeCurrent} '"
  rowSelection = "single" id = 't3' columnStretching = 'last '.
  "partialTriggers =": cb20: cb50 "
  styleClass immediate = "AFStretchWidth" = "true" autoHeightRows = "8" >
  < af:column id = rowHeader "c54" = "true" align = "center" width = "100" >
  < af:commandButton text = 'Details' id = "cb10".
  actionListener = "#{jcbwb.jcbOrderRowSelect}" > < / af:commandButton >
  < / af:column >
  < af:column sortProperty = "ssku_size_1" sortable = "false".
  rendered = "#{gridDetailsBN.ssku_grid_col_1} '"
  headerText = "#{gridDetailsBN.ssku_grid_col_1_hdr}" id = "c44" > "
  < af:inputText value = "#{row.bindings.ssku_size_1.inputValue} '"
  label = "#{Bindings.ssku1.hints.ssku_size_1.label} '"
  required = "#{Bindings.ssku1.hints.ssku_size_1.Mandatory} '"
  Columns = "#{Bindings.ssku1.hints.ssku_size_1.DisplayWidth} '"
  maximumLength = "#{bindings.ssku1.hints.ssku_size_1.precision} '"
  shortDesc = "#{bindings.ssku1.hints.ssku_size_1.tooltip} '"
  disabled = "true" id = "nonpopupit61" >
  < f: validator binding="#{row.bindings.ssku_size_1.validator}"/ >
  < / af:inputText >
  < / af:inputText >
  < / af:column >
  < / af:table >

  Hello

  Set in the immediate to true on the Cancel button.

  Zitouni

• How to control the execution of a sequence of flat have the Cancel button

  Hello
  I have a question for you guys.
  Suppose I want to write a program to control a set of materials by sending commands via a serial port
  In fact, he calls a 'round '. Because a series of specific commands will send via a serial port at once specific time. What I call one a time Cycle.
  Between each send command steps there is a delay (waiting in range of Timing). The joint part of my VI.

  I was wondering how I can integrate a Cancel button which is able to act in any image of the flat sequence Structure?
  As you can see it is not everything in loops to have the best control of the program because I want to run commands in the series only once.
  Where to put the button 'Cancel' in frames?
  I want to show a confirmation message when the user clicked the Cancel button, and if the answer was 'YES' LabvIEW stops running flat sequence Structure and of the specific procedure to cancel (which is not included in above VI) takes place. Otherwise (by clicking 'NO') program continues to run...

  Note that home is just a simple version of what I intend to

  For example in some frames, it will be a while loop and so on...

  But there will be only on flat sequence at all

  Excuse me for my bad English

  Hi mostafi,.

  General answer: convert your flat sequence in a correct state machine States!

  Now, you can check your "Cancel" button after each State is treated...

• Re: Font book. I chose "restore standard fonts" by mistake. How to get back on my choice. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thank you!

  Re: Font book.

  I chose "restore standard fonts" by mistake. How to get back on my selection. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thanks in advance!

  If you click on 'Restore the standard fonts', fonts that are not included in the OS X systems is placed in a "fonts folder (deleted) next to the fonts folder.

  / Library/Fonts

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• How can I rearrange tracks on the album in my media library if they download not digitally

  How can I rearrange tracks on the album in my media library if they download not digitally

  Files generally display their contents in alphabetical order.  Windows Media Player, on the other hand, if you include this file in the library, should be able to display them in the order of the songs on the album, they are on and you ask WMP for the information of the album on the web.

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• How to keep the control on the same line after clicking the Cancel button

  Hello

  I use JDev 11.1.2.4.

  I have a search in a table (form A) that has a link to change another form (form B).

  Form B have two save and Cancel buttons with Commit and Rollback actions.

  Action on the Undo button is

  ADFUtils.findOperation("Rollback").execute ();

  Question: Suppose I'm at rank 3 on the form and click on the link to call the B form. Now, when I make some changes to the form B and press the Cancel button, the control returns to the row 1. I want to keep the control on line 3.

  any ideas?

  Thank you

  What do you mean by form? is this page?

  Is the form B and form A in the same page or diferrent?

  If the 2 form in diferrent pages you can add parent the iterator in the pageDef. of the child page

  To add iterator the pageDef parent. child follow this:

  1 - Open pageDef. of the child.

  2 - press executable section

  3. in the Insert item dialog box select 'Iterator' and then 'Ok '.

  4. you will find the DataControl extend above then select the Master iterator, then press 'Ok '.

• How to cancel my subscription to Adobe? I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

• How to validate an entry when the focus leaves the intensity absorbed in

  How to validate an entry when the focus leaves the intensity absorbed in a form?

  "Ansury" wrote in message
  News:garo90$L71$1@forums. Macromedia.com...
  > Not AFAIK. Event.Target has a reference to the object that sent the
  > event. In livedocs:
  >
  > "Every event object has a goal and a currentTarget property that help."
  > you
  > Hold where it is being spread. The target
  > property
  "> return to the sender of the event."
  >
  > BUT...
  > Your if statement will never evaluate true because you compare one
  > UITextField to a TextInput. A UITextField (stored internally in a
  (> TextInput, it makes the text) actually dispatches the event.

  currentTarget gives you the object on which the event actually listener
  attached to...

• Delete from Table on the Cancel button.

  Hello
  
  I am facing problem funny.
  
  I created the form with the report page and I have option to implement send e-mail on the Page so I am attaching a document more with email.if I attach document then it goes into the DUMY_DOC_FILE table.
  
  I create a process
  

   
  
  delete from DUMY_DOC_FILE .
  
  Process Point IS ON Submit -After Conmputation and Validation 
  
  
  On Page No 6.

  If I press the button Cancel Button.This is redirecting on page no. 4. not my Code on Page 6.
  page is redirect to 4 but the doc don't delete Table of DUMY_DOC_FILE.
  
  How to remove Doc from Table if I press the Cancel button.
  
  Thank you
  
  Published by: 805629 on January 13, 2011 05:25
  
  Published by: 805629 on January 13, 2011 23:49
  
  Published by: 805629 on January 14, 2011 12:43 AM

  This conditional validation_, so that it does not cancel send button (for example: *: ASK! = 'NAME of the BUTTON' *)

• AF:dialog - simpler to hide the Cancel button?

  Want to match some of what we have in a form application, and the dialog box is coming up closer than the panelWindow in terms of use, but I would like to be able to show just 1 button in the dialog for OK, rather than the 2 of them. I see the facet buttonBar on the component of the dialog box allows me to extend the buttons that are there, but I want to be able to hide the Cancel button. How this work normally/more-easily?
  
  Thank you.
  
  With the help of JDev 11.

  Button cancel any reasons to hide? What is the af:dialog type = "ok"? OR af:popup with a button?