AirPort Extreme not recognized

Similar Questions

• Airport extreme not recognized by airport utility

  Comcast serves intermittent internet Chronicle, which I think is part of the problem but not all that.  Their router is connected to my Time Capsule., which seems solid, but I've reconfigured several times due to my primary problem.  I bought a new wireless airport extreme (AEX) this year, model A1392 base low, but that has not helped, and in fact the question continues to worsen.  It almost ruined my Christmas day.   I use the AEX to listen to my itunes music on my stereo, as part of the network wifi househol, not a new configuration, and I have another in another room as an Extender that I speak of because it is less important, but has the same problem.  I want my music to work but the AEX continues to fall out of the network.  If I get the orange light flashes the only option I have given is to "Forget this device."  Of course, I wish that gave me the option edit and return to the network, but no.  Forget that the instrument is always bad, because Airport utility will NEVER recognize, any device I restarted many times.  If I go back to the factory settings, utility Airport will allow me to bring back the AEX in my wifi network, but comcast will then intermittent me the new AEX fell, this time with a green light fixed and Airport Utility NEVER acknowledges again.

  I don't know why it should be so difficult.  Apple isn't more fun.  My AEX should integrate easily and always in my wifi network at home.  What is the answer, please?

  What modem router do you have? Make and model please?

  What the Express installation?

  Please give me some screenshots of airport utility showing the contents page and the internet, wireless and network of the tabs.

  Since I understand what is wrong.

  Express does not and was never intended to be used as your main router. This is an auxiliary device to extend wireless, plug in the printer, airplay, etc..

  You more than probably a better router.

• 2nd airport Extreme not found in Airport utility

  I recently replaced an Airport Extreme 6 years with a new one. The former we worked, but the range of its signal seems to have declined, so we replaced.

  Now the news is up and running without problem. And I would take the old and use it to extend our network. We already have an Airport Express Terminal to expand the network, so this would add another node.

  I moved to its new location and plugged the power cord. It shows the yellow flashing light. However, the old Airport Extreme does not appear in Airport utility. Screenshot attached. There is nothing in the section other devices Wi - Fi.

  

  ZeroOne_nomap-2 is my new base station. AirPort Express of Sunny was already part of the network. The old base station does not appear.

  Any ideas?

  You must reset the 2nd Gen AirPort Extreme back to default settings, before it can be put in place to expand the network.

  Temporarily, to locate the 2nd Gen airport near the new AirPort Extreme

  Turn on the 2nd Gen airport a few minutes

  Then hold down the reset button on the back of the airport for 5 to 6 seconds then release

  Allow a minute for the airport restart to a slow, flashing amber light status

  

  Now click the WiFi icon at the top of your Mac.

  Look for an announcement of the new AirPort base station

  Click on AirPort Extreme, just below this list

  

  Who will get the "Wizard" configuration running. It will take a few seconds to display a screen that looks like this, except that you can see your devices and the network name.

  Type a name you want to call the 2nd Gen airport

  Click next

  

  The wizard will set up everything for you. When you see an installation message, click done

  Now, turn off the power and pass the 2nd Gen to its new location where it can receive a strong signal from the AiPort Extreme 'hand' and turn on the 2nd Gen airport

• Chromecast - Airport Extreme: not casting

  Hello everyone, so I bought a new rMBP and I also had to get the Airport extreme combo all the experience.

  I have a 2015 rMBP, Airport Extreme, Apple TV, iPhone Chromecast 6, laptop computer Dell Windows 10 & 1320c Dell Color Laser printer.

  I've never had a problem before, but after I installed my new router (AE) and connecting all my devices, I do not see tab cast in any of my applications of melting of chrome.   I wonder if apple don't just market talk to chromecast.

  Really, I don't want to have to buy an another apple tv for the living room, I'm fine with the help of the chromecast with my laptop and other applications. Can someone please shed some light on this situation?  I need help and have exhausted all my resources and have not been able to find anything online in reference. Keep in mind, I am very Tech savvy and never had this kind of problem before. So everything is correctly connected, connected, and put in place. Just can't go to my chromecast.  What is a block from the Airport extreme? because it works very well with my Netgear WNDR3700 N600.   Thank you, I appreciate any help on this.

  ---------

  Please check previous post and my reply. He always refers to your question. The only difference is that Google updated list routers include the A1408 AirPort Extreme... which is still not compatible with Chromecast.

• Airport Extreme not supported

  The utility Airport now says it does not support my Airport Extreme (old model). What should I do to configure the extreme now?

  Thank you

  Rookie

  What model do you have?  You can try this.

• Failure of the Airport Extreme and Airport Express

  Airport Extreme not to talk to the device POE from the antenna of radio after a thunderstorm (lightning).  Plug the POE ethernet cable directly into Mac works.  Airport Express lights.  Airport Extreme appears, but there is no internet connection.  A port can be fried on the Airport Extreme?

  Yes, but unfortunately the port that will blow is that ethernet is plugged.

  If it's WAN then you do not have a way to use the airport as a router... only a bridge device.

• Airport Extreme Ethernet not recognized

  I recently bought an Airport Extreme (bought summer 2016) and have laid a cable cat5e (100 feet) across my house, so I can connect through ethernet when I want a faster connection. The airport is located behind a modem 2Wire (UVerse) but acts as a router.

  When I got the cable along the floor boards, it worked fine. I raised it through our basement (under floor) and it no longer works. I checked the cable with a LAN Tester and it passed. I also ran it directly from the UVerse for the MacBook and worked well. I would like to run from the airport, however, not the Uverse modem.

  Can anyone suggest why she might have stopped working? (I tested the ports on the airport with other ethernet cables, and they are operational, as is the ethernet on my MacBook port).

  Any help would be greatly appreciated, as it's driving me crazy.

  You affected pairs...?

  Even though the MB worked have you actually checked that it worked at full speed?

  See this post for nearly identical problem... and why pairs are so important.

  https://discussions.Apple.com/thread/7084985

• provider changed vague Qwest and now one device connects to the net.  Seems to not be recognizing the airport extreme.  Patches?

  Decided to change providers.  Network domestic fine fixed by extreme airport which has been consulted by 9 apple devices and windows device.  After the wave was installed yesterday, the only device able to connect is the cell that was active at the time of installation.  Is this a problem with my airport extreme or vague does not not with mac?  All the patches would be appreciated.

  After the wave was installed yesterday, the only device able to connect is the cell that was active at the time of installation.

  Sounds like Installer connected your laptop directly to a modem to put in place the new connection.  If that's what happened, then the modem will recognize your laptop, but it will not recognize the AirPort Extreme, then it will appear as if only your laptop can get a connection.

  The modem and AirPort Extreme should probably be reset and then set it up again. We'll know more soon.

  Can you provide the number of brand and model of the modem that was shipped with your service?

  What operating system uses the laptop?

• HP C4780 and Airport Extreme: says "device not connected" when installing wireless

  Hello.  I appreciate any help with this problem.  I searched but I've not found anything exactly similar.  I have a MacBook Pro under OSX 10.5.8 and an Airport Extreme.  I am trying to set up a HP C4780 printer using the HP installation software.  The printer is connected to the Mac via a USB cable for Setup, and all the steps of the Setup routine recognized the printer.  Until... when I get to the part "network wireless configuration" of the process, Setup HP sees my network (802.11n, the type of encryption WPA_PSK) and asks for my password.  After I entered the pw, it runs for about 20 seconds and gives me the following message: "device not connected.  To configure the network settings for the device selected, please temporarily connect via USB. The device can be disconnected from the USB once the network settings are transferred. »

  My printer is well connected by USB, however.  By reading some similar positions, I tried the following: limit the wireless to channell 11, by clicking on the button "allow this network be extended" and disconnect the printer before the launch of wireless setup.  I also tried several bottles of beer, but which only degrades the connection between the keyboard and the seat.  No luck so far.  Any help would be appreciated.  Thank you.

  C4700 series has a bug in the firmware where it crashes when meeting a SSID of 6 characters.

  Change your SSID to 10 or 12 characters until a firmware fix is published.

  If this does not work, drink more beer.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• The airPort Extreme is not working after Firmware update

  Hello

  At our office, we have several AirPort Extreme or TimeCapsules and one of them (AirPort Extreme) stop working properly after the update 7.7.7

  The update itself is supposed to be ok and we have updated all our stations but it only seems to not work. I have hard and factory reset and somehow until last month worked more less, but from this week completely stop working and even reset does not work.

  I already ran out of ideas and it seems that Apple wants to charge me $ 30 for a phone call.

  Someone at - it a similar case? Should I take on the Apple Store?

  Thanks in advance for your help.

  You can get it replaced if it is less than one year... That is to say in the warranty or if you have any computer or ipad or apple TV which is covered by the applecare will also cover the airport up to 3 years old if EI is less than 2 years, you can still buy applecare on a product calling... or you can buy say an apple TV and buy applecare for it.

  If Apple do not repair them. only, they will be replaced.

• the Airport extreme appears not on the graphic overview

  the Airport extreme appears not on the graphic overview

  Everything plugged and works

  Unable to connect with the personal network

  By graphical overview, I presume you are talking about airport utility?

  Are you using wireless or ethernet?

  You have run diagnostic wireless on your Mac if you use wireless?

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

• Device not found Airport Extreme

  We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.

  The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.

  I have reset the AirPort Extreme to the default settings, but the problem continued...

  I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...

  no idea how I can fix this problem?

  You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.

  If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.

  Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.

  There is a solution: on a Mac, open AirPort Utility and select file > configure other...

  For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.

  Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.

  If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.

  Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Airport Extreme appearing does not in Airport utility

  Airport Extreme is connected to the internet but will not be displayed in the Airport (see image below) utility.

  My home network consists of the following:

  Cable modem Comcast Arris TM722

  • Airport utility to view an IP from Comcast ending 1
  • Now, it displays 10.0.xx.1 and is connected to the internet, but the IP is really the same old Comcast ip address ending 1

  Airport Extreme Office worm 7.7.7 (primary - dhcp)-has an IP from Com

  • Airport utility to view an IP from Comcast ending with .xxx and internal ip address of 10.0.xx.1, but the ip address is really the same old Comcast ip address ending in .xxx internal ip address of 10.0.xx.1

  Airport Extreme lounge worm 7.7.7 (bridged)

  • Airport utility to view the internal IP ending par.2 (static)

  Airport Express Patio worm 7.7.6 (bridged)

  • Aport utility always displays an internal ip address, ending (3) (static)

  All computers are:

  MacOS worm 10.11.6

  Airport Utility ver 6.3.6

  Question: Neither Airport Extreme appears in Airport utility (both are gray with yellow triangle! icon), the Airport Express appears fine.  Everything worked as it should until yesterday, I haven't changed anything.  From time to time I run a vpn on one of my Mac client.

  I can access one of the ends using the option "Set up other" under the menu of Airport utility file.

  Wireless and internet work as it should, the usb drives attached to the 01 extremes are accessible.

  Things I've tried (based on the reading of the support articles that I found from 2013 to present):

  Electric bike on everything.

  • Does nothing.

  Soft reset everything.

  • Does nothing.

  Hard resetting everything.

  • Does nothing.

  Affecting the default extremes and reconfigure them.

  • Does nothing.

  Definition of 'Configure IPv6' to link-Local only on the two extremes.

  • Does nothing.

  Activation of the guest network

  • Makes the show of extremes, but only one at a time, not both.

  I am completely confused and looking for suggestions.

  Thanks in advance.

  

  This is because by turning back to my Mac on the extremes of the airport, so basically it comes a problem of iCloud.

  The fix in this thread of Mac rumors-

  http://forums.MacRumors.com/threads/airport-utility-does-not-see-Airport-extreme - but.1987777 / #post-23234030

  In. short, turn off the back of my Mac on your Airport Extreme (or time capsule).

  We expect that Apple will fix this.