How to access a shared script?

Similar Questions

• How to access a shared file on my RN212 NAS remotely from another program?

  I've looked everywhere trying to find how to access a shared file on my RN212 NAS remotely from another program (kodi) on my iPhone 6 more remotely, away from home. I tried to FTP, UPnP, HTTP, etc. anything and it's driving me crazy! I run the program kodi from my phone for watching videos stored on my SIN, I have a router NightHawkR7000 and believe that I am fairly warned to get this figured out, but apparently not lol I have all the correct ports forwarded, but perhaps I'm missing a step somewhere. Any help on this would be much appreciated!

• How to access a shared on a remote device with a variable IP different during execution?

  I need expert advice. I need to do something that sort of violates the assumptions behind the model of variable communication shared LV I have to be able to read a shared variable since a cRio device when the IP address of the device is not fixed.  In other words, the IP address of the device is known only at run time. Is it still possible?

  The only way I can think that LV would be able to find variable motor device/shared on the remote device is by changing the alias the runtime file and then try to access the variable shared again hoping this will cause also the sv engine note the new IP address and use it.

  Hi Rob,

  Yes it is possible. There are several ways to do so, but here are two. If you have LabVIEW 2009, use the new features for programming of the shared variables in the data communication palette. These just have an address that you can determine at run time. The address is of the form ni.var .psp://machinename_or_ip/libraryname/variablename. Here is an example of selecting a name at run time using these features:

  

  If you are using a version prior to 2009, you can use DataSocket roughly the same way except that the address forms a little different - psp:\\machinename_or_IP\libraryname\variablename. These are also present in the same range of data communication.

  

  Either of these methods, you will get better performance if you open the connection once, write several times and close the connection when you are finished. You should avoid opening and closing of the reference variable whenever you want to access the variable.

  Good luck

  Gerardo

• How to access the variable script proc SQLplus?

  Lets start with the following SQLplus script:
  
  variable username varchar2 (100);
  Start select user in: user name of double; end;
  /
  
  print the user name;
  
  Select * from WHERE = owner all_tables "& username'"
  
  
  
  
  Issues related to the:
  
  Why do I get invited to enter a "/" when running the script in SQLplus? Even if I insert a / after the username 'impression' statement I am invited to enter an end delimiter.
  
  In addition, I would like to access the user name value in the following SELECT statement. However when I as code above the value of the variable is not taken. Instead, the user is prompted to enter a user name.
  
  No there is no way to 'transfer' of the value of the SQL user name?
  
  Peter

  You're confusing SQL * more variable substitution (those with '&') and bind variables.

  Replace the "& username" with: username as shown below:

  SQL> variable username varchar2(100);
  SQL> begin select user into :username from dual; end;
    2  /
  
  PL/SQL procedure successfully completed.
  
  SQL> print username;
  
  USERNAME
  ---------------------------------------------------------------------------
  SCOTT
  
  SQL> select * from all_tables WHERE owner=:username;
  

• Have new 4th gen tv apple. Home sharing is on. I'm unable to access my music library on my MAC other than a few titles that have been purchased. How to access my entire music library?

  Have new 4th gen tv apple. Home sharing is on. I'm unable to access my music library on my MAC other than a few titles that have been purchased. How to access my entire music library?

  Welcome to the Apple community.

  You wonder if you might be looking at the wrong place. You can watch/listen to house content shared app for computers not the music app.

• How to access the url of the page referred by using script Idoc?

  How to access the url of the page mentioned by using Idoc script...

  For example

  If the following url (http://myhost/mysite) is called by the end-user, it redirects to the UCM login page.

  The page of connection, so I want to get their hands on the referring here (http://myhost/mysite). To do this, I followed the following documentation.

  I put IdcAuthExtraRequestParams = referer in

  /base_domain/UCM/CS/bin/intradoc.cfg and

  /base_domain/UCM/CS/config/config.cfg

  UCM server restarted and Http server.

  Used < $HTTP_REFERER$ > in my htm file. It does not display anything.

  Can I know what went wrong? Is there an alternative way to get this?

  @Jon, I saw some variables such as ssOrignialUrl have the information in the console, but they are lost when its consultation: in page.

  I pulled out the tracedump to the page itself, which gave me a new variable<$AUTH_TARGET_URL$> that contains this value.

  Thanks Jon at made me think so

• How to access the status of a script design

  In the user interface of the Control Center Manager, there is a column called "Stage design" which tells us if the object is "New", "Unchanged" or "Changed". How can access you this information from a script? For example, in a script:
  
  -Can list you the 'Design' status all objects in the repository?
  - Or maybe you can find out about the 'design status' of a particular object?
  - Or you can list all the objects that are "new"?
  
  Thank you
  
  Gavin
  OWB 10.2

  Hi Gavin,
  I don't know exact algorithm of OWB for admission to the 'Design' status, but I guess that it is based on two public views - design from the view of the public ALL_IV_ALL_OBJECTS and DURATION of public ALL_RT_AUDIT_OBJECTS the view.

  select d.object_name,d.object_type,d.updated_on,case when r.OBJECT_UOID is null or r.last_status='REMOVED' then 'New' else        case when d.updated_on>r.last_deploy_date then 'Chaged' else 'Unchanged' endend design_statusALL_IV_ALL_OBJECTS d,(select OBJECT_UOID,min(STATUS_WHEN_DEPLOYED) keep (dense_rank last order by created_on) last_status,max(created_on) last_deploy_datefrom ALL_RT_AUDIT_OBJECTS group by OBJECT_UOID) rwhere d.OBJECT_UOID=r.OBJECT_UOID(+)
  

  Please note that this SQL does not all treatments for INVALID deployment status...

  Kind regards
  Oleg

• DIAdem programming - how to access each data cell in the table?

  How access us each cell in the file of PDM current access using the script of DIAdem environment? Could someone send me a code example?

  Thank you

  Hi NiCoder,

  If you can load these channels as digital channels instead of the string channels, then you can use the function "G" use in the channel Finder to retrieve a specific bit value of a digital channel (which contains integers).  You can alternatively convert all strings string channels to digital channels, and then use the function 'G' out of all the values 0 or 1 of the 5th bit of the values of each channel.  Running this command with ChnCalculate() runs much faster than access to each value of the layer one at a time, although you can use the GetB() function with each value in a loop of the channel.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

  I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

  If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

  If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Also:
  "Description of the account in Windows XP"
    <>http://support.Microsoft.com/kb/300489 >

  HTH,
  JW

• I have a problem, try to uninstall the ask toolbar. get the error message: cannot access the VB script... need help please

  I have a problem, try to uninstall the ask toolbar. get the error message: unable to access the VB script... need help

  Hello

  How do you try to uninstall the toolbar?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  How to fix script errors in Internet Explorer on Windows computers:

  http://support.Microsoft.com/kb/308260

  Correction of errors in Internet Explorer: http://support.microsoft.com/kb/822521

  Method 2:

  Try to uninstall the toolbar, programs and features and check if it helps.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope the information is useful.

• I get a "Network error" Evertime I try to access a shared folder on another PC in my network.

  I get a "Network error" Evertime I try to access a shared folder on another PC in my network.  I get error code 0 x 80070005 access denied.  When I click on diagnose, I get a message that says 'c' is available, but the user account you're connected with was access dinied.  Also, I can't use Media player media sharing Windows.  I wonder if they are related

  Read this info and see if it helps:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  See you soon.

  Mick Murphy - Microsoft partner

• VM simulator - how to access the file system.

  I was wondering if anyone knows how to access the file vmware playbook simulator system.

  I don't want access programmatically, I covered, for access to the file system to copy files to the Simulator in shared directories.

  When you connect a playbook on the USB, it shows up as a drive, and I would like access to the same playbook vm dir structure to copy files for testing. for example if your s app access the pictures on the camera, I would like to copy some images for the test. Any ideas?

  TIA - dave

  Search the forum for more information on using 'ssh' to access the Simulator and more specifically help 'scp' or 'sftp' to transfer files to. You will do this in the files under/accounts/1000/shared, and if you're on Windows you will probably be to install PuTTY to do this. Feel free to ask for help more once you have dug through it all.

• Set up two separate networks with access to shared resources

  Hi all

  We have a two separate companies in the same building which will both need access to shared resources and the same internet connection. They must be on separate subnets cannot communicate directly with each other. The current switch is a Cisco ESW-520-48P and we are looking to buy an SG-300-20 p for the new entity moving in. Heres how we envisage the establishment:

  • ESW-520 will host network company A. workstations, servers, etc.
  • SG - 300 will be two VLANS. Vlan1 will host any business network (B) workstations, servers, etc. VLAN2 will host shared resources, such as printers.
  • The internet gateway is a system based on UNIX with 3 CARDS. 2 NETWORK cards is absorbed by ADSL connections, while the other card NETWORK LAN, linking to VLAN2 on the SG-300. We would like to define which connection ADSL to carry through according to what subnet traffic is originating.
  • The ESW-520 need access to shared resources and the internet gateway on VLAN2 on the SG-300.

  This will be possible with these two switches? It would be the best way to go about this?

  Appreciate any recommendations that you can provide.

  Thank you

  Tom

  Hi Tom, yes the ESW can be either an access port to the vlan 2, unidentified or you can configure the trunk for the host devices on two subnets on the ESW, your choice. When the SX300 is L3 it will load the intervlan routing when you assign IP addresses for the interfaces of VLAN locally.

  Default gateways will be the SX300 Lass (interface vlan).  There will always be a route established between subnets so assign each vlan an IP address.

  You'll see ARP of course through the subnets of course. Not sure the DHCP acknowledgement, etc..

  -Tom
  Please mark replied messages useful

• How can I disconinue sharing of any kind on my acer laptop for win 7/64 home premium?

  Original title: NO PARTICIPATION using win 7

  How can I disconinue sharing of any kind on my acer laptop for win 7/64 home premium?  I want to share anything with anyone.

  Hi rhagland,

  To prevent files or sharing folders do the following:

  (a) open computer management. To do this, click Start, then right click on computerand then click Manage.

  (b) if the user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click Yes.

  (c) in the console tree, click System Tools, click shared folders, and then click share.

  (d) in the Details pane, right-click on a shared folder and then click stop sharing (this option appears only if you started the computer management by using a member of the local Administrators group account).

  To stop sharing multiple files, press CTRL while clicking the file names, right-click one of the selected files and then click stop sharing. This removes access network shared files selected.

  
  See also: http://technet.microsoft.com/en-us/library/cc753475.aspx

  You can also check the following links for more information on sharing:

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
  

  http://Windows.Microsoft.com/en-us/Windows7/keep-specific-files-and-folders-from-being-shared-with-a-HomeGroup
  

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials#section_4

  Let us know what helps.

• How to access page aplication module of dynamic region?

  Hello

  I have a main app with the shared library. Page.JSFF (from the main application) contains dynamicRegion. Task flow for this dynamicRegion I defined in library shared sessionBean. I need call commit action in the main application for the data in a dynamic region.

  How to access the application module or binding operation for page of workflow dynamic region?

  I try to do this:

  BindingContainer bc is BindingContext.getCurrent () .getCurrentBindingsEntry ();.

  DCTaskFlowBinding dtb = (DCTaskFlowBinding) (bc) .findExecutableBinding ("dynamicRegion1") (DCBindingContainer);

  System.out.Print ("" + dtb.getViewPort().getViewId()+"\n"); -return id correct view

  Form JUFormBinding = dtb.findExecutableBinding ("test5PageDef") (JUFormBinding);

  DCBindingContainer dcRegion = form;

  OperationBinding o = dcRegion.getOperationBinding ("Commit");

  o.Execute ();

  but the result is NullPointerException

  Jdev 11.1.2.4

  Thank you

  Hello

  Try this:

  BindingContext bindingContext = BindingContext.getCurrent ();

  DCBindingContainer dcBindingContainer = bindingContext.findBindingContainer("myPageDef");

  OperationBinding operationBinding = dcBindingContainer.getOperationBinding ("Commit");

  operationBinding.execute ();

  Kind regards

  Ruben