How to access my other network cards?

Similar Questions

• How can I determine what NETWORK card for vShere driver?

  I want download the driver of NETWORK card adapter: Marvell 8001 that is integrated on the motherboard for vShere.

  I checked that the kernel has been 2.6.18 - 128.ESX. But, I don't know what Linux is, for example, Red Hat or anything else. So, how do I determine what NETWORK card for her driver and where I ca nget it?

  Thank you!

  George

  Just thought I'd provide the link to the HCL.   http://www.VMware.com/resources/compatibility/

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• How to upgrade the wireless network card in Windows Vista

  Hello

  Please how can I update the wireless network card?

  Thanks for the help

  Hello

  I suggest you try the steps from the following link to update the wireless network card drivers.

  a. right click on the Start button and click on Device Manager.
  b. display all devices on one.
  c. right-click on the WLAN driver and click on Update.

  Display us the results, once you try the steps above.

• How to get the driver network card and on the use of the PowerCLI firmware version?

  Hi all

  I would like to know if anyone can help me in sharing the PowerCLI script to list the server NETWORK card driver and the firmware version?

  Note: I use the HP Blade Server and it's manual ESX - CLI command output:

  	HP BL 465c G8
  	~ # ethtool-i vmnic0
  	pilot: be2net
  	version: 10.5.65.4
  	firmware version: 10.2.340.19
  	bus-info: 0000:04:00.0

  	HP BL 465c G7
  	~ # ethtool-i vmnic0
  	pilot: be2net
  	version: 10.2.293.0
  	firmware version: 4.9.416.7
  	bus-info: 0000:04:00.0

  Any kind of help would be greatly appreciated.

  Thank you.

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 6.0 Release 2 build 3056836

  ---------------

  Component versions

  ---------------

  VMWare AutoDeploy PowerCLI component 6.0 build 2358282

  VMWare ImageBuilder PowerCLI component 6.0 build 2358282

  VMware vSphere PowerCLI component 6.0 build 3052101

  It works for you?

  $esxName = "MyEsx".

  $esxcli = get-EsxCli - VMHost $esxName

  $esxcli.network.nic.list () | %{

  $esxcli.network.nic.get ($_.) Name) |

  Select Name,

  @{N = "Driver"; E={$_. DriverInfo.Driver}},

  @{N = 'Version'; E={$_. DriverInfo.Version}},

  @{N = 'Firmware Version'; E={$_. DriverInfo.FirmwareVersion}}

  }

• How to add the second network card?

  A server (VMware ESX 4.1) works well with a network card. Since I want to add a virtual switch, I need to add another network card. So I inserted into a PCI slot and reboot ESX. But the ESX does not. I need to reinstall ESX to let him find this network adapter?

  Thank you very much for the help.

  The added network adapter is Gigabit PCI Desktop Adapter, D-Link DGE-528 t.

  I tried several model D-link years... None of this can work.

  Use a broadcom or Intel card (and listed in HCL).

  André

• How can failed Realtek RTL8139 network card I download another

  my card network Realtek RTL8139 failed, how can I download another

  I just downloaded from the HP website and let my comp. do it for me.    Works very well.

• Network connects via radio instead of via the network cable. How can I configure the network card as the default network connection?

  Network wireless adapter NIC Ethernet network device

  I've updated from Windows XP to Windows 7 recently. My internet connection used to be connected directly to my computer and I have a wireless router for other users in the House. Since getting 7, my computer (while still having the direct connection) should automatically connect via the wireless. If I disable the feature wireless to the computer I lose access to the internet completely. Is there anyway that I can get it back to the way it was without going back to XP? I know it's probably something really simple to fix, but I just can't understand it. Thanks for any help you can give!

  Hello

  I recommend you to follow the steps suggested in this article and check if it helps.

  I can't connect to the Internet via wired broadband digital subscriber line (LAN) or cable.

• How to access the "Check Box" card resource

  Hello, I currently use 11.1.1.3.0 from IOM.
  
  I created a resource object, a form and an adapter that uses the java code that I created.
  
  In the form, I have two checkboxes, which act as Boolean values. These boxes should be introduced to the java method, that I created. I have downloaded the jar, went into the task of the adapter and began to fill the input parameters when I realized that I don't know how do to access the data card resource.
  
  So, how can I get it back of the IOM or not a selected user 'true' or 'false' (regarding the checkbox) and enter the java method via the console design?
  
  Can someone help me with this?

  You will need to create a process of type definition 'disposition' and specify the resource "Unix Linux" and the table as "US_ULHOST". Once you create the process, you will need to create your workflow (i.e. to define tasks that need to be called in a certain order) and connect your adapter to these tasks. When you attach your card you must map the entrance / exit of the adapter to the task. Thus, by mapping the entry, you will have the option to select "process data" and there you will see your form fields. I would say through the developer's guide to a better understanding of the procurement process and etc.

  -Marie

• How to use the second network card physical to Virtual Machine?

  Two queries. We strive to VMware Server 2

  How to increase the speed of the network of the guest operating system.  Currently it shows 10 Mbps.

  If we have a second physical network adapter, is it possible to use it for the guest OS. ?

  We are noobs, please give links to this info or explain in steps.

  concerning

  Merlina.

  Welcome to the VMware forums communities.  You may be able to fix your problem by changing the type of virtual NETWORK adapter and install VMware Tools.  See this KB article - http://kb.vmware.com/kb/1002456.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• How to know if a network card is configured as auto-negotiation

  Hi all

  I would like to automatically check if all the network adapters on ESXi all are configured as auto-negotiation

  the Get-VMHostNetworkAdapter does not provide this information

  Thks for help

  Try this

  Get-VMHost | Get-View | %{
       $esx = $_
       $_.Config.Network.Pnic | %{
            if(!$_.Spec.LinkSpeed){
                 $auto = $true
            }
            else{
                 $auto = $false
            }
            $row = "" | Select ESX, pNIC, Autonegotiate
            $row.ESX = $esx.Name
            $row.pNIC = $_.Device
            $row.Autonegotiate = $auto
            $row
       }
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to add a second network card to my VMs

  I would like for my VMs see as two NICs installed on my machine. What are the steps to get there there are only three options briged, host-only, and Nat which should I use?

  Probably want to make a host only NIC then and have a second VM on the host that too, assuming that the one you already have is filled, that simulates a machine on the inside of your network.

• How update you the wireless network card

  My WLAN continues to stop. What should I do

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  For more information:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Choose a specific NETWORK card in VCB Proxy?

  Hi, I have VMware Consolidated Backup installed on a VCB Proxy with two network adapters. A NIC goes to the switch for iSCSI box, and the other NETWORK adapter goes to the general network switch. How can I specify which NETWORK card to use?

  Here's the problem I have, is that, without the "nbd m" option is specified, it gives me an error:

  "vcbMounter" 1784 error] error: could not open the drive: cannot access the SAN/iSCSI LUN support this virtual disk.

  However, if I use the "nbd-m" option, VCB can see the iSCSI and do a backup very well. However, it does so through the NETWORK adapter connected to the general network and not through the NETWORK adapter go to the iSCSi switch. If I don't have the two switches are connected, it does not at all. This seems to be a waste of bandwidth to send the backup through two switches traffic.

  Is there a way to specify which NETWORK card to use for backups in VCB?

  TIA-danno

  If your VMFS volumes are on an iSCSI array and you don't have any iSCSI HBAs in your VCB proxy, you must have Microsoft iSCSI initiator installed. Once you have installed, you must ensure that your VMFS volumes are exposed to the initator on the VCB proxy, so you can mount them. In the iSCSI initiator parameters, you can specify the IP source (NIC) on the server to use to connect to the iSCSI target.

  Hope that helps! Please, help me by marking my response as "useful" or "correct", if you feel it is useful!

  -Amit

• How can I make a network between two databases?

  Hello all;
  

  Is going to set up oracle 10 g - (

  I try to Exchange data between two different databases.)
  Each database is configured in different operating systems.
  
  For ex: a database of windows XP (separate virtual machinne)
  a database of linux rhel (separate virtual machinne)
  
  I'm waiting for suggestions...
  
  Thank you...
  
  Published by: 969352 on March 19, 2013 10:04

  969352 wrote:

  What virtualization product do you use?

  * #* vmware - toolbox - cmd - v
  8.1.3.9911 (build-203739)

  VMWARE product information:

  Version: 7.0.0 build - 203739

  Ok. You will need to ensure that the ip addresses you assign to your virtual machines are in the same subnet that the adapter created by the installation of vmware. Once you get the fixed basic network installation, you can treat these virtual machines like any machine in your data center. Forget the vm console and access it exactly as you would for any remote server - putty for the Linux and Windows Remote Desktop to the Windows machine.

  To a prompt on the host computer, post this:

  c:> ipconfig -all
  

  You will get feedback on multiple net cards, of which two are identified as with vmware - vmNet1 and vmNet8. Note the IP addresses of the two. We'll need later.
  You'll also need to know how you have configured the network cards on your virtual machine - NAT, bridged, hostonly?

  Note that these issues are out of scope for this forum. I don't mind helping, but I don't have an installation of vmware for details of the reference.

  Which have really tried to do? ( Data transfer )

  I tried to Exchange data from windows to linux DB database

  It's pretty vague. Exactly how did you try to "Exchange data"? A SQL using a db_link? import/export? Pigeons?
  >

  Where are you stuck?

  I don't know, how to set up the ip address and the necessary information for the windows database.

  Configuration of an IP address is purely a matter of admin OS and out of range for this database forum.
  Google is your friend, but only if you use: [url http://lmgtfy.com/?q=configure+windows+ip+address] http://lmgtfy.com/?q=configure+windows+ip+address
  >

  It's all Edstevens... Thank you...

• To access the other account via external hard drive

  MacBook Pro (13 inch, early 2011)

  V.10.11.6 El Capitan (15G 31)

  To summarize what I've lived, I got a kernel panic, by connecting to any account. So I tried to fix it by zapping the PRAM and NVRAM, tried the reset SMC, and both did not work. So I installed El Capitan on my external hard drive and it works, I just need to access the other account on the Mac to recover photos and then do a clean set install.

  The problem is that I do not know how to access the other account on the mac like I did not move any info from another acc to my external hard drive. Is it possible to do more than to reconfigure my HD post and return to the new installation procedure? Or I'm able to get pictures on the other account with the photo software?

  Open the drive containing, then the folder users, your record of departure, and photos. If you encounter a file that you don't have access permission, either drag it to the office supply your administrator password, or select the entire disk, choose get the information in the file menu and set to ignore permissions or ownership.

  (143739)