How to access the counters in cDAQ9174 / NI9403 with C / Matlab

Similar Questions

• How to access the Recovery Console for "fixmbr" with Toshiba Recovery DVD?

  Hello

  I searched but did not find all related messages, I start a new thread.

  I have to fix the MBR and normally you can do this via the recovery XP and then Console "fixmbr". As you may know Toshiba Recovery DVD know only in a sense - the way hard "format hdd or first partition".

  * How can I fix the MBR on the standard MBR MS when no original XP installation disk/DVD is usable - Toshiba Recovery DVD are available
  tried the XP CD from my office... but you know... it doesn´t work.

  Additional information:
  I deleted my HARD disk partition table and cannot access the first partition to a partition that would be very useful that I could try to recover this partition later - but I can't. My A200 SatPro also comes without floppy disk but can boot from USB.

  Thanks for any answer!

  Best regards
  Andreas

  Post edited by: alphasig - updated and corrected typos in page

  Yes, the thing with the recovery console fixmbr should do the trick, and I am a bit surprised that your XP from your other computer disk does not work.

  You are not able to boot from it, or what is the exact problem? Because you will not be able to repair with your recovery disk.
  Advise you to try another original XP disc, may borrow from a friend and try again. You may need to change the boot priority to operate.

• How to access the info in my iCloud account

  How to access the info in my iCloud account?

  You can access much of the iCloud.com on a computer or through specific applications on your mobile device such as contacts, calendars, iCloud Drive, Photos. What exactly you were looking for and what type of device.

• How to access the bios?

  I am trying to install a new OS, how to access the bios on my HP Pavilian dv8?

  Hello:

  You should be able to access the BIOS by pressing the F10 key as soon as you see the HP welcome screen.

  Paul

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• How to access the firefox on laptop Office keeping all the features?

  How to access the firefox on laptop Office keeping all tabs and bookmarks?

  Hello

  You may be able to do this in Firefox Sync configuration on both devices. Please see for detailed instructions.

• Qosmio G30-126 - how to access the bios!

  I have a laptop Qosmio G30-126 and I don't know the key to enter the bios to change real estate for the HARD drive or something... then how to access the bios? What is the key for the bios?

  Hello

  Try pressing the F2 key by turning on the device.
  The Toshiba notebooks supported the ESC and then F1 button
  If these two options are possible

• Re: How to access the BIOS on Satellite Pro A120

  Can someone tell me how to access the BIOS on my SAT Pro A120?

  Hello

  You must press ESC and then F1 key immediately after the laptop has been powered!

  The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!

  Good bye

• How to access the BIOS on Satellite A110-195 settings?

  How to access the BIOS settings (CPU, video memory ect). I have http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&PRODUCT_ID=1 18639

  At the start when the Toshiba start screen appears press F2 repeatedly and you should be able to enter the BIOS settings.

• How to access the BIOS on Satellite C50-A-1F

  Hey folk,

  A small question:

  How to access the BIOS of my laptop?

  I tried this method and f12, f1, f2 etc.

  Thanks in advance

  Have you ever tried to look for similar issues here in the forum?

  Check this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=76740

• HP laptop - 15-ac121dx: how to access the ram on a 15-ac121dx modules

  I want to upgrade the ram in my HP laptop - 15-ac121dx and maybe the hard drive, but I can't understand how to access the ram. There is no access panel, and unlike some other models, it doesn't have a single lever in the battery bay to remove the cover.

  OK, I realized how down low on the laptop.  After watching some youtube videos I came across another HP laptop computer who had screws under the rubber feet and of course there are also screws under the back of two rubber feet, can't believe I didn't think to look under them.

  To get the background you need to:

  1. Remove all the screws on the bottom.  (Must be 12 total)
  2. Remove the drive from DVD (Yes it does not).
  3. Finally, carefully separate the case around the side.

  After that, you should have full access to the slots of RAM and hard drive.

• How to access the material data (ACPI)?

  Since there seems to be no solution comes the question how to access data from hardware ACPI functions with Linux (Ubuntu).

  Windows device management indicates a driver for the fan control and the temperature. So, apparently, there is the ability to view and order the material. The question remains: how to read or conbtrol of Linux.

  Research in/proc/acpi has not shown the results.
  Maybe in the area/sys.
  Someone here to give a hint on this problem?

  Best regards / gwhh

  Hello

  Perhaps this thread could help you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64329
  The Linux ASPM function will save some power but is not enabled by default
  You can try to activate this manually using the parameter:

  pcie_aspm = force

• How to access the BIOS on Satellite Pro A120

  Sorry for my English.
  But I need help:

  How to access the BIOS on my Satellite Pro A120

  Hello

  If I m not wrong not the Satellite ProA120 is supported by the Toshiba BIOS and so you should be able to access the BIOS pressing the * ESC * key immediately after starting the laptop

• Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

  Hello

  I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

  How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

  Any help much appreciated

  Hey,.

  On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

  You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

  If you don t have the recovery disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• How to access the BIOS on Satellite L670-134

  Hello

  I need to access the BIOS, but I don't know the key combination.
  Tried F1 F2 DEL Backspace etc that none worked.
  I think I activated an option such as quick start once before... when I turn on the laptop I see not all postscreen, the screen remains black after turning on the laptop, and then the windows logo appears.

  So, how to access the BIOS!

  Hello

  Usually, you can access the BIOS by pressing the "F2" immediately after that the laptop was turned on!
  Try this once more. Alternatively, you can press F2 repeatedly to be sure that this has been accepted.

  Also try key INS all by turning on the laptop and then F2