How to account for the Radius Server cisco vpn client
Hello
I would like to realize vpn cisco customers
My config is:
AAA authentication login default local radius group
RADIUS AAA authentication login aaa_radius local group
RADIUS group AAA authorization exec default authenticated if
AAA authorization vpn LAN
failure to exec AAA accounting
action-type market / stop
RADIUS group
!
AAA accounting network aaa_radius
action-type market / stop
RADIUS group
RADIUS-server host x.x.x.x auth-port 1812 acct-port 1813 key xxxxx
No package of accounitng is sent to the server radius, only the packages autthetication
RADIUS server is freeradius
Thank you
Pet
Hello!
The sequence of commands you add to your configuration:
1. in the case of former card crypto
crypto-NAME of the customer accounting card card list aaa_radius
2. in the case of isakmp profiles
Profile of crypto isakmp PROFILE NAME
accounting aaa_radius
When the NAME of the map and the PROFILE NAME real names for you profile crypto map or isakmp respectively.
I hope this helps.
Best regards.
Tags: Cisco Security
Similar Questions
-
MS RADIUS and Cisco VPN client
We currently have with a Server Windows RAS and IAS authentication with PPTP to users.
I want to move a hub (we have two not used) and the use of the Cisco VPN client with IPSEC 3005, also using the RADIUS (IAS) in Windows to authenticate against Active Directory.
I have a config to work for the client and it performs authentication, but I'm afraid that you can't configure IAS to work with IPSEC, unless you configure the policy for
"Unencrypted authentication (PAP, SPAP).
on the Authentication tab
and
"No encryption".
on the encryption tab.
Are encrypted with IPSEC credentials to establish the tunnel of the Cisco VPN client?
For RADIUS PAP authentication, the user name is clear and the password is encrypted with the RADIUS shared secret.
To maximize security, you would use GANYMEDE + or IPSec transport mode and isolated VLAN. But for most of us, strong passwords and physical security prevents the RADIUS PAP to a significant weakness.
-
Another problem with the configuration of Cisco VPN Client access VPN Site2site
We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site. JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support. So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0
Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.
CORP netowrk 192.168.1.0
IP VPN 192.168.12.0 pool
Colo 10.1.0.0 internal ip address
Also, here's an example of my config ASA
: Saved
:
ASA Version 8.2 (1)
!
hostname lwchsasa
names of
name 10.1.0.1 colo
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
backup interface Vlan12
nameif outside_pri
security-level 0
IP 64.20.30.170 255.255.255.248
!
interface Vlan12
nameif backup
security-level 0
IP 173.165.159.241 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network NY
object-network 192.168.100.0 255.255.255.0
BSRO-3387 tcp service object-group
port-object eq 3387
BSRO-3388 tcp service object-group
port-object eq 3388
BSRO-3389 tcp service object-group
EQ port 3389 object
object-group service tcp OpenAtrium
port-object eq 8100
object-group service Proxy tcp
port-object eq 982
VOIP10K - 20K udp service object-group
10000 20000 object-port Beach
the clientvpn object-group network
object-network 192.168.12.0 255.255.255.0
APEX-SSL tcp service object-group
Description of Apex Dashboard Service
port-object eq 8586
object-group network CHS-Colo
object-network 10.1.0.0 255.255.255.0
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.1.0 255.255.255.0
host of the object-Network 64.20.30.170
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
ICMP service object
service-object icmp traceroute
the purpose of the service tcp - udp eq www
the tcp eq ftp service object
the purpose of the tcp eq ftp service - data
the eq sqlnet tcp service object
EQ-ssh tcp service object
the purpose of the service udp eq www
the eq tftp udp service object
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
ICMP service object
EQ-ssh tcp service object
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0
outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
outside_pri_access_in list extended access permit tcp any interface outside_pri eq www
outside_pri_access_in list extended access permit tcp any outside_pri eq https interface
outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100
outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface
outside_pri_access_in list extended access permit icmp any any echo response
outside_pri_access_in list extended access permit icmp any any source-quench
outside_pri_access_in list extended access allow all unreachable icmp
outside_pri_access_in list extended access permit icmp any one time exceed
outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586
levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0
outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0
outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0
outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0
Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list
OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0
L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
exploitation forest asdm warnings
record of the rate-limit unlimited level 4
destination of exports flow inside 192.168.1.1 2055
timeout-rate flow-export model 1
Within 1500 MTU
outside_pri MTU 1500
backup of MTU 1500
local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 100 burst-size 5
ICMP allow any inside
ICMP allow any outside_pri
don't allow no asdm history
ARP timeout 14400
NAT-control
interface of global (outside_pri) 1
Global 1 interface (backup)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside_pri) 0-list of access OUTSIDE-NAT0
backup_nat0_outbound (backup) NAT 0 access list
static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns
static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns
Access-group outside_pri_access_in in the outside_pri interface
Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1
Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254
Timeout xlate 03:00
Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
http server enable 981
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside_pri
http 0.0.0.0 0.0.0.0 backup
SNMP server group Authentication_Only v3 auth
SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt connection tcpmss 1200
monitor SLA 123
type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri
Annex ALS life monitor 123 to always start-time now
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outside_pri
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_pri_map 1 match address outside_pri_1_cryptomap
card crypto outside_pri_map 1 set pfs
peer set card crypto outside_pri_map 1 50.75.217.246
card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5
card crypto outside_pri_map 2 match address outside_pri_cryptomap
peer set card crypto outside_pri_map 2 216.59.44.220
card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
86400 seconds, duration of life card crypto outside_pri_map 2 set security-association
card crypto outside_pri_map 3 match address outside_pri_cryptomap_1
peer set card crypto outside_pri_map 3 216.59.44.220
outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
card crypto outside_pri_map interface outside_pri
crypto isakmp identity address
ISAKMP crypto enable outside_pri
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 50
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
!
track 1 rtr 123 accessibility
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd auto_config outside_pri
!
dhcpd address 192.168.1.51 - 192.168.1.245 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
rental contract interface 86400 dhcpd inside
dhcpd field LM inside interface
dhcpd allow inside
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection host number rate 2
no statistical threat detection tcp-interception
WebVPN
port 980
allow inside
Select outside_pri
enable SVC
attributes of Group Policy DfltGrpPolicy
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal GroupPolicy2 group strategy
attributes of Group Policy GroupPolicy2
Protocol-tunnel-VPN IPSec svc
internal levelwingVPN group policy
attributes of the strategy of group levelwingVPN
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl
username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard
aard attribute username
VPN-group-policy levelwingVPN
type of remote access service
rcossentino 4UpCXRA6T2ysRRdE encrypted password username
username rcossentino attributes
VPN-group-policy levelwingVPN
type of remote access service
bcherok evwBWqKKwrlABAUp encrypted password username
username bcherok attributes
VPN-group-policy levelwingVPN
type of remote access service
rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username
rscott username attributes
VPN-group-policy levelwingVPN
sryan 47u/nJvfm6kprQDs password encrypted username
sryan username attributes
VPN-group-policy levelwingVPN
type of nas-prompt service
username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0
username cbruch attributes
VPN-group-policy levelwingVPN
type of remote access service
apellegrino yy2aM21dV/11h7fR password encrypted username
username apellegrino attributes
VPN-group-policy levelwingVPN
type of remote access service
username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5
username rtuttle attributes
VPN-group-policy levelwingVPN
username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin
username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0
username nbrothers attributes
VPN-group-policy levelwingVPN
clong z.yb0Oc09oP3/mXV encrypted password username
clong attributes username
VPN-group-policy levelwingVPN
type of remote access service
username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0
username attributes finance
VPN-group-policy levelwingVPN
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
type of remote access service
IPSec-attributes tunnel-group DefaultL2LGroup
Disable ISAKMP keepalive
tunnel-group 50.75.217.246 type ipsec-l2l
IPSec-attributes tunnel-group 50.75.217.246
pre-shared-key *.
Disable ISAKMP keepalive
type tunnel-group levelwingVPN remote access
tunnel-group levelwingVPN General-attributes
address LVCHSVPN pool
Group Policy - by default-levelwingVPN
levelwingVPN group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group 216.59.44.221 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.221
pre-shared-key *.
tunnel-group 216.59.44.220 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.220
pre-shared-key *.
Disable ISAKMP keepalive
!
!
!
Policy-map global_policy
!
context of prompt hostname
Cryptochecksum:ed7f4451c98151b759d24a7d4387935b
: end
Hello
It seems to me that you've covered most of the things.
You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel
outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo
Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.
-Jouni
-
How to use Windows 7 64-bit cisco vpn client?
Hello
I want to use the cisco vpn client to connect to my Institute.
I use Windows 7 64-bit edition Home premium.
I tried several options, but nothing has worked.
Please suggest me the correct procedure to run on my Windows 7 64 bit Home Premium Cisco vpn client.
Thanks in advance,
Federico
VPNclient is not yet supported on 64-bit windows.
However, there is a beta version of the next 5.0.7 version that does.
Have you tried this version? If so, what are the exact symptoms?
Edit: you can download the 5.0.7 beta here
-
RSA token with Cisco VPN clients
I am currently using the 3.6 Cisco VPN client that connects to a 6.3 (4) version Pix. I want to migrate to token SecurID from RSA to RADIUS authentication. Is this possible with these versions of the software? I could not find information on the client to support the SecureID.
Roland,
Yes, it is possible.
Please see the below URL for more information:
http://rsasecurity.agora.com/rsasecured/guides/imp_pdfs/Cisco_PIX_702_AuthMan61.PDF
Let me know if it helps.
Kind regards
Arul
-
Setup
Cisco Catalyst 2960-S running 15.0.2 - SE8
Under Centos freeRadius 6.4 RADIUS server
Client (supplicant) running Windows 7
When Windows client is connected to the port (port 12 in my setup) with authentication of 802. 1 x active switch, show of Wireshark that catalyst sends ask EAP and the client responds with EAP response. But it made not the request to the Radius server. The RADIUS test utility 'aaa RADIUS testuser password new-code test group' works.
Here is my config running. Any advice would be greatly appreciated.
#show running mySwitch-
mySwitch #show running-config
Building configuration...Current configuration: 2094 bytes
!
version 12.2
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname myswitch
!
boot-start-marker
boot-end-marker
!
activate the password secret 5 $1$ Z1z6$ kqvVYRQdVRZ0h8aDTV5DR0 enable password!
!
!
AAA new-model
!
!
AAA dot1x group group radius aaa accounting dot1x default start-stop radius authentication group!
!
!
AAA - the id of the joint session
1 supply ws-c2960s-24ts-l switch
!
!
!
!
!
control-dot1x system-auth
pvst spanning-tree mode
spanning tree extend id-system
!
!
!
!
internal allocation policy of VLAN no ascendant interface FastEthernet0 no stop ip address!
GigabitEthernet1/0/1 interface
!
interface GigabitEthernet1/0/2
!
interface GigabitEthernet1/0/3
!
interface GigabitEthernet1/0/4
!
interface GigabitEthernet1/0/5
!
interface GigabitEthernet1/0/6
!
interface GigabitEthernet1/0/7
!
interface GigabitEthernet1/0/8
!
interface GigabitEthernet1/0/9
!
interface GigabitEthernet1/0/10
!
interface GigabitEthernet1/0/11
!
interface GigabitEthernet1/0/12
switchport mode access
Auto control of the port of authentication
dot1x EAP authenticator
!
interface GigabitEthernet1/0/13
!
interface GigabitEthernet1/0/14
!
interface GigabitEthernet1/0/15
!
interface GigabitEthernet1/0/16
!
interface GigabitEthernet1/0/17
!
interface GigabitEthernet1/0/18
!
interface GigabitEthernet1/0/19
!
interface GigabitEthernet1/0/20
!
interface GigabitEthernet1/0/21
!
interface GigabitEthernet1/0/22
!
interface GigabitEthernet1/0/23
!
interface GigabitEthernet1/0/24
!
interface GigabitEthernet1/0/25
!
interface GigabitEthernet1/0/26
!
interface GigabitEthernet1/0/27
!
interface GigabitEthernet1/0/28
!
interface Vlan1
IP 10.1.2.12 255.255.255.0
!
IP http server
IP http secure server
activate the IP sla response alerts
recording of debug trap
10.1.2.1 host connection tcp port 514 RADIUS-server host 10.1.2.1 transport auth-port 1812 acct-port 1646 timeout 3 retransmit testing123 key 3.
Line con 0
line vty 0 4
password password
line vty 5 15
password password
!
endinterface GigabitEthernet1/0/16
!
interface GigabitEthernet1/0/17
!
interface GigabitEthernet1/0/18
!
interface GigabitEthernet1/0/19
!
interface GigabitEthernet1/0/20Have you run wireshark on the server because the request to switch? If so you make sure that there is a response from the server? For Windows network POLICY Server (I've never tried Centos), you must ensure that the request is related to a policy which then authenticates, or denies access. Usually, it is a matter of such attributes and the seller.
Regarding the configuration, it seems a bit out of the AAA. Try to remove the:
line "aaa dot1x group service radius authentication" and this by using instead:
"aaa dot1x default radius authentication group". After the dot1x word you are supposed to provide a list of the authentication or the default Word if you do not want to use a list.
-
How 2 Configure ACS 4.2 to delegate authentication to the radius server
Hello
We need run the following scenario:
Cisco VPN client (or any connect, Cisco SSL VPN client)---> Cisco ASA 5520---> Cisco ACS 4.2---> CAT Authentication Server
The CAT authentication server is a Radius server. It can receive Radius authentication requests and respond. It is used for strong authentication TFA WBS similar to RSA OTP tokens.
The question is: how we set up the 4.2 ACS to delegate authentication request to another Radius server.
Thnx
Add the RSA server as an external database, configure the drop user profile or a group to authenticate on the new external database rather than ACS DB Local (or Windows DB).
Easy as pie!
Please rate if this is useful.
-
How to create a VPN file .pcf for the CISCO VPN CLIENT software profile
Dear all
How to create a VPN file .pcf for the CISCO VPN CLIENT software profile
Concerning
Hi Imran,
Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.
Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.
Once you create and save this profile. Your FCP file is stored.
Please assess whether the information provided is useful.
By
Knockaert
-
Cisco 1812 no contact to the Radius Server
Hi guys,.
IM pretty new to cisco and plays with an 1812 products... I am trying set up an easy VPN server, with the support of ray and I can see that I did everything right, but there is a problem, because the router do not contact the RADIUS server and the RADIUS server has been tested ok.
Anyone who can see what I'm missing? Worked with this problem for 3 days now.
Here is my CONF.
Current configuration: 9170 bytes
!
! Last modification of the configuration to 13:44:49 UTC Tuesday, October 12, 2010
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
no set record in buffered memory
!
AAA new-model
!
!
AAA server radius sdm-vpn-server-group 1 group
auth-port 1645 90.0.0.245 Server acct-port 1646
!
AAA authentication login default local
AAA authentication login sdm_vpn_xauth_ml_1-passwd-expiry group sdm-vpn-server-group 1
AAA authorization exec default local
AAA authorization sdm_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-250973313
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 250973313
revocation checking no
!
!
TP-self-signed-250973313 crypto pki certificate chain
certificate self-signed 01
308201A 5 A0030201 02020101 3082023C 300 D 0609 2A 864886 F70D0101 04050030
2 040355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
69666963 32353039 37333331 33301E17 313031 30313230 39343333 0D 6174652D
395A170D 2E302C06 1325494F 03540403 32303031 30313030 30303030 5A 303031
532D 5365 6C662D53 69676E65 4365 72746966 69636174 652 3235 30393733 642D
06092A 86 4886F70D 01010105 33313330 819F300D 00308189 02818100 0003818D
BCF94FB0 77240E92 B703CE70 556D5D22 A57823E5 DD4CD4C4 12D639DE 5E97DB2D
81FBB304 9FA677A6 CAD84F96 9734081B F8F8FAAE 000B02FB AEF7C7B1 73AFA44B
7D27E112 8991F03B 3D4FD484 34E2EA9F BD426F73 48778F2A AD35AAD6 EC00805D
249B 8702 D545AEEA 40670DFD 3E6BEC29 EE48A0C6 CB7694FD 722D1A62 3A499CC5
02030100 01A 36630 03551 D 13 64300F06 0101FF04 05300301 01FF3011 0603551D
11040A 30 08820652 6F757465 72301F06 23 04183016 801462CB F6BD12F6 03551D
080C8A89 F9FBBDCE 9751528A FFFD301D 0603551D 0E041604 1462CBF6 BD12F608
0C8A89F9 FBBDCE97 51528AFF FD300D06 092 HAS 8648 01040500 03818100 86F70D01
ACA87977 CF 55225 6 9147E57E 8B5A8CA8 46348CAF 801D11C6 9DA57C69 14FA5076
6844F0CC 4CBEB541 136A483A 69F7B7F0 E44474E8 14DC2E80 CC04F840 B 3531, 884
F08A492D 8C3902C0 725EE93D AC83A29F 799AAE0F 5795484B B3D02F84 911DB135
5 189766 C30DA111 6B9B4E46 E999DA5B 202 21B0B9D4 HAS 6900 07A93D8D 41C7FD21
quit smoking
dot11 syslog
IP source-route
!
!
!
!
!
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
license udi pid CISCO1812/K9 sn FCZ10232108
username admin privilege 15 secret 5 P677 $1$ $ Rggfdgt8MeD8letZDL08d.
!
!
!
type of class-card inspect correspondence sdm-nat-smtp-1
game group-access 101
smtp Protocol game
type of class-card inspect entire game SDM_AH
match the name of group-access SDM_AH
type of class-card inspect all sdm-cls-insp-traffic game
match Protocol cuseeme
dns protocol game
ftp protocol game
h323 Protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
inspect the class-map match sdm-insp-traffic type
corresponds to the class-map sdm-cls-insp-traffic
type of class-card inspect all SDM-voice-enabled game
h323 Protocol game
Skinny Protocol game
sip protocol game
type of class-card inspect entire game SDM_IP
match the name of group-access SDM_IP
type of class-card inspect entire game SDM_ESP
match the name of group-access SDM_ESP
type of class-card inspect entire game SDM_EASY_VPN_SERVER_TRAFFIC
match Protocol isakmp
match Protocol ipsec-msft
corresponds to the SDM_AH class-map
corresponds to the SDM_ESP class-map
type of class-card inspect the correspondence SDM_EASY_VPN_SERVER_PT
corresponds to the SDM_EASY_VPN_SERVER_TRAFFIC class-map
type of class-card inspect all match sdm-cls-icmp-access
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence sdm-invalid-src
game group-access 100
type of class-card inspect correspondence sdm-icmp-access
corresponds to the class-map sdm-cls-icmp-access
type of class-card inspect correspondence sdm-Protocol-http
http protocol game
!
!
type of policy-card inspect sdm-permits-icmpreply
class type inspect sdm-icmp-access
inspect
class class by default
Pass
type of policy-card inspect sdm-pol-NATOutsideToInside-1
class type inspect sdm-nat-smtp-1
inspect
class class by default
drop
type of policy-map inspect sdm - inspect
class type inspect sdm-invalid-src
Drop newspaper
class type inspect sdm-insp-traffic
inspect
class type inspect sdm-Protocol-http
inspect
class type inspect SDM-voice-enabled
inspect
class class by default
Pass
type of policy-card inspect sdm-enabled
class type inspect SDM_EASY_VPN_SERVER_PT
Pass
class class by default
drop
type of policy-card inspect sdm-license-ip
class type inspect SDM_IP
Pass
class class by default
Drop newspaper
!
security of the area outside the area
safety zone-to-zone
ezvpn-safe area of zone
safety zone-pair sdm-zp-self-out source destination outside zone auto
type of service-strategy inspect sdm-permits-icmpreply
source of sdm-zp-out-auto security area outside zone destination auto pair
type of service-strategy inspect sdm-enabled
safety zone-pair sdm-zp-in-out source in the area of destination outside the area
type of service-strategy inspect sdm - inspect
sdm-zp-NATOutsideToInside-1 zone-pair security source outside the area of destination in the area
type of service-strategy inspect sdm-pol-NATOutsideToInside-1
in the destination box source sdm-zp-in-ezvpn1 ezvpn-pairs area security
type of service-strategy inspect sdm-license-ip
source of sdm-zp-out-ezpn1 of security area outside zone ezvpn-zone time pair of destination
type of service-strategy inspect sdm-license-ip
safety zone-pair sdm-zp-ezvpn-out1-source ezvpn-zone of destination outside the area
type of service-strategy inspect sdm-license-ip
safety zone-pair source sdm-zp-ezvpn-in1 ezvpn-area destination in the area
type of service-strategy inspect sdm-license-ip
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group Sindby crypto isakmp client
key TheSommerOf03
90.0.0.240 DNS 8.8.8.8
win 90.0.0.240
SBYNET field
pool SDM_POOL_2
Max-users 15
netmask 255.255.255.0
ISAKMP crypto sdm-ike-profile-1 profile
identity Sindby group match
client authentication list sdm_vpn_xauth_ml_1
ISAKMP authorization list sdm_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
Crypto ipsec transform-set esp-SHA2-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-3des SHA3-ESP-3DES esp-sha-hmac
Crypto ipsec transform-set esp-3des SHA4-ESP-3DES esp-sha-hmac
Crypto ipsec transform-set esp-3des SHA5-ESP-3DES esp-sha-hmac
Crypto ipsec transform-set esp-3des SHA6-ESP-3DES esp-sha-hmac
Crypto ipsec transform-set esp-3des SHA7-ESP-3DES esp-sha-hmac
Crypto ipsec transform-set esp-3des SHA8-ESP-3DES esp-sha-hmac
Crypto ipsec transform-set esp-3des SHA9-ESP-3DES esp-sha-hmac
Crypto ipsec transform-set esp-3des SHA10-ESP-3DES esp-sha-hmac
!
Profile of crypto ipsec SDM_Profile1
game of transformation-ESP-3DES-SHA10
isakmp-profile sdm-ike-profile-1 game
!
!
!
!
!
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
!
interface FastEthernet0
Description $FW_OUTSIDE$
IP address 93.166.xxx.xxx 255.255.255.248
NAT outside IP
IP virtual-reassembly in
outside the area of security of Member's area
automatic duplex
automatic speed
!
interface FastEthernet1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
FastEthernet6 interface
!
interface FastEthernet7
!
interface FastEthernet8
!
interface FastEthernet9
!
type of interface virtual-Template1 tunnel
IP unnumbered FastEthernet0
ezvpn-safe area of Member's area
ipv4 ipsec tunnel mode
Tunnel SDM_Profile1 ipsec protection profile
!
interface Vlan1
Description $FW_INSIDE$
IP 90.0.0.190 255.255.255.0
IP nat inside
IP virtual-reassembly in
Security members in the box area
!
local IP SDM_POOL_1 90.0.0.25 pool 90.0.0.29
local IP SDM_POOL_2 90.0.0.75 pool 90.0.0.90
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
IP http timeout policy inactive 600 life 86400 request 10000
!
!
IP nat inside source static tcp 192.168.1.200 25 interface FastEthernet0 25
the IP nat inside source 1 interface FastEthernet0 overload list
IP route 0.0.0.0 0.0.0.0 93.166.xxx.xxx
!
SDM_AH extended IP access list
Remark SDM_ACL = 1 category
allow a whole ahp
SDM_ESP extended IP access list
Remark SDM_ACL = 1 category
allow an esp
SDM_IP extended IP access list
Remark SDM_ACL = 1 category
allow an ip
!
exploitation forest esm config
access-list 1 permit 90.0.0.0 0.0.0.255
Access-list 100 = 128 SDM_ACL category note
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip 93.166.xxx.xxx 0.0.0.7 everything
Remark SDM_ACL category of access list 101 = 0
IP access-list 101 permit any host 192.168.1.200
!
!
!
!
!
!
RADIUS-server host 90.0.0.245 auth-port 1645 acct-port 1646
!
control plan
!
!
Line con 0
line to 0
line vty 0 4
transport input telnet ssh
!
end
Hello
Looks like you're missing the key from the radius server configuration "RADIUS-server host 90.0.0.245 auth-port 1645 1646 key your_keyacct-port»
Thank you
Wen
-
How to restrict Internet access by using the RADIUS server via switch Catalyst 3560
Dear all,
I need a configuration using any. I have a small network of 15 users a 3560, which is in turn connected to a router ISR 2811. Interface fastethernet 0/24 switch 3560 I intend to connect to a unix based server RADIUS. ISP is connected on the opposite side of the 2811 to the fa0/0 interface.
I want to make is that if someone among the 15 users tries to access the internet, they must be validated in the RADIUS server by their pre-configured user credentials. (I'm going to store 15 user credentials here). If someone else tries to connect (except those 15) he or she should be denied internet access.
The RADIUS server will be having a login page to type the name of user and password.
Please guide based on what commands I should inject into the 3560 or what specifically, I need to have to run this task.
Thanks in advance!
Samrat.
I only did this in a very long time, but you probably want to do is activate the web authentication.
-
Test of the RADIUS server options
Hello
Does anyone have experience in the radius server availability tests? I have what the switch is used to test the availability of the radius server and what measures he will take after the detection of server are dead? Setup is done with ISE 1.4.
Hello
Because how switch contact RADIUS and how to configure the switch for dead timers, I will redirect you on the Cisco documentation which is very simple and complete as well.
http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/iDEN...
All parameters to mark a server as dead and how long it will be considered as dead are tweak-able. Setting dynamically some servers as dead if no responses may result in better performance of RADIUS response.
Thank you
PS: Please don't forget to rate and score as correct answer if this answered your question.
-
Account for the Services Active Directory permissions
In the Cisco Unity Message Store Setup Wizard, I have problems with the account for Directory Services.
I created accounts (for the unit Directory Services) and for the unity Message Store Services and I run the wizard of permissions (usign CUICA).
However, when I specify the unit Directory Services account, the Configuration Wizard of Cisco Unity Message Store displays an error message indicating that the user doesn't have good Exchange permissions.
How can that be resolved?
Thanks in advance
If you order the Installation of the unit Guide to 4.x with Exchange in the section on creating accounts for the installation\Setting of the Exchange permissions.
You have to manually delegate the Exchange appropriate for your scenario via Exchange Admin perms.
The doco details the process better than I could.
If you already have, I got two check all your accounts and permissions.
I hope this helps.
NJ.
-
Auto, judgment of 10 days after installation for the Windows Server 2008 R2 evaluation version
Hello
I downloaded and installed the Windows Server 2008 R2 evaluation version. Initially. It seems to work perfectly. According to Microsoft, the trial period is 180 days. However, ten days after the installationt (10 days for activation), the system began to stop automatically every half hour.
For events, file system log event ID is 1074.
The information for this event are below.
The wlms.exe process has launched the power off computer Win2k8R2-1 (server name) for the NT AUTHORITY\SYSTEM account for the following reason:
Other (unplanned)
Reason code: 0x0
Stop type: power off
Please help solve this crucial problem.
Best regards
John Zhang
John,
For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.
Thank you & good luck. -
Error code 64 c for update of security for the SQL Server 2005 Service Pack 3 (KB2494113)
Have tried to install KB2494113 - update of safety and he constantly fails to install. Help please as I know very little about the "intricacies" of my laptop
Hi Phillipmuir,
Step 1:
You can read the following article and try to reset the Windows Update components and check.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Step 2:
You can also check the following link and try to download and install the standalone update package:
Update of security for the SQL Server 2005 Service Pack 3 (KB2494113)
Hope this information is useful.
-
Problems to connect via the Cisco VPN client IPSec of for RV180W small business router
Hello
I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for
> [34360] has no config mode. I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.
Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.
Router log file (I changed the IP
addresses > respectively as well as references to MAC addresses) Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart
> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT> [44074] because it is admitted only after the phase 1.
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for> [4500]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for> [4500] - > [44074] with spi = >.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of> [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP>
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of> [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP>
Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for> [4500] - > [44074] with spi = > The router configuration
IKE policy
VPN strategy
Client configuration
Hôte : < router="" ip=""> >
Authentication group name: remote.com
Password authentication of the Group: mysecretpassword
Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)
Username: myusername
Password: mypassword
Please contact Cisco.
Correct, the RV180 is not compatible with the Cisco VPN Client. The Iphone uses the Cisco VPN Client.
You can use the PPTP on the RV180 server to connect a PPTP Client.
In addition, it RV180 will allow an IPsec connection to third-party customers 3. Greenbow and Shrew Soft are 2 commonly used clients.
Maybe you are looking for
-
How can I get a continuous square wave to the duty cycle of 50% on one of the analog lines?
Hello, I had recently just buy an analog card to our system, and I'm still very new to labview. I have the PXI-6723, and I need to produce a wave square of 0 to 5 volts continuously. I used the square wave generator and used a writing funtion to on
-
Sir/Madam, Hello. My laptop is HP Pavilion DV4-2045DX Entertainment Notebook with 4 GB of memory which is 2 coins in 2 locations inside the machine. Because 4 GB of RAM is not enough to run my system now, I need to upgrade the memory of 8 GB that is
-
What is a good external backup drive that won't empty my wallet
I need to get an external backup drive for my PC, but do not know how to do in this regard. I've seen most are very Exspensive. Someone told me to get Seagate? Is - this right or which is a good thing?
-
my homepage is MSN and my list of favorites is lost when my laptop was updated.
Hello. I have a HP pavillion g series with windows 7, processor intel core i5, radeon graphics card. My problem is that when the HP update feature does its thing and has updates to apply, Solange restart my homepage from yahoo to MSN NZ NZ, and the c
-
Upgrade Alienware 17 r2, graphics, memory and SSD; heating system and stops
I tried to find information on the upgrade from my old system of r2 to Alienware 17 with new graphics, memory and an SSD, but I've been to find contradictory information on it, and if I would still be able to upgrade my graphics. My current setup is: