How to add a horizontal line in RoboHelp 7 HTML
HI - I work with RoboHelp 7 HTML. I want to add a horizontal line to my topic. I use RoboHelp as my editor. Working mainly in WYSWYG / Design mode and do not do much coding by hand in general, but sometimes I change the code. Because I couldn't find a way to WYSIWYG to add a line horizontal, so thought I would try the < hr / > tag.Unfortunately - it just shows up on top of the display page of design as a big, red evidence of the < hr / > tag.
Suggestions?
Thanks, Leisa
So much worse... as simple as faulty code - Oh
I told you I didn't hand code a lot...
There
Tags: Adobe
Similar Questions
-
How to create a horizontal line in the region of html
Hello
How can I create the html elements, including a horizontal line in an html area filled with items. I want to use this horizontal line to part elements optically. Moreover, my solution for now is to group the elements belonging together in a separate html area. So I have now 3 parts of html, each filled with 5 columns of elements. Is it possible to align the elements in the 3 regions (together)? Cause at the present time, only the items in each region are aligned.
I use oracle 11 g 2 with apex 4.1
wucis wrote:
Apex version is 4.1
Theme: Sapphire 17
Page: Two level Tabs - right Sidebar (optional / based on a table)
The region is HTML
Main question is, how to create a horizontal line as visible separator between items.
My personal preference would be to group the items according to the needs in the subregions and use CSS to display the Visual borders and uniform spacing of control over formatting tables.
If however you want using HTML single region, is to create elements of the only view to the agenda of the positions of the sequence in the region where you want the jumps to appear, with the following parameters:
Name: PX_HR_1 / / substitute suffix number and an increment of page as required
Display in the form: Display only
Save Session State: NO.
Start on a new line: Yes
Start the new field: Yes
ColSpan: number of columns in your layout
Label: leave blank
Horizontal/Vertical alignment: Above
Model: --choose a model--
Type of source: Static assignment
Source of value or expression:
-
Hello
I have a region with 20 columns +, I want it divided into two sections and draw a horizontal line. I don't want to create another region. I have trired to add Stop 'and Start HTML table' but could not figure out how to draw the line.
Can someone please advise?
Thanks in advance
AaliHello
you're right, create a new breakpoint and start HTML Table (label poster only)
middle of your articles and seq number 30 means 30.1 like this
and the label -
How to have the horizontal line?
I have 3 horizontal frames that are added to the screen. I need to have a horizontal line between the managers.
How to do?
Thanks for any help.
You should be able to do it with a SeparatorField
-
How to add the new line?
Hello
I wrote a select statement, the data is displayed, and I want to add a new line, how do?
There is no icon "more (add)" the above data.
Then, you insert first a table, then in the other.
If you choose multiple tables so you are most likely to join them in some way, and when joins between in the field (or even worse grouping functions) you're sure source of data you see actually (this is the reason why by default you cannot insert data from a select query), as it is perfectly possible to select only a single column in a single table , but if this table has multiple columns and one of them is defined as NOT NULL, and you're not selecting then you are out of luck and you cannot insert of your select query.
There are cases when the insertion is possible and where it is not SQLDeveloper try even to guess if they can put your query, and is a good decision, when the data changes, it is always better to think first of my humble OPINION and you might forget that if edit you a query result grid.
-
How to add a new line in the JavaScript editor?
I have a script like this:
var n = this.getField("score").value;
If (n > = 0 & & n < 5) {}
Event.Value = "The WP 100% Bond\nThe 10% Stock WP / 90% Bond\nThe WP 20% Stock / 80% Bond."
}
I want out of this line as...
The leap from 100% WP
The Stock of 10% WP or the Bond of 90%
The Stock of 20% of WP or 80%
But it's not to honor the \n for a newline. How in the heck can you add a new line? I tried \r, \r\n, \n\n. It is to add a space character and looks like this...
The leap from 100% WP WP 10% Stock or the Bond of 90% 20% of WP Stock or Bond of 80%
You can use \n like you did to indicate a new row or \r (carriage return). If this does not work, be sure to set the Multiline field on the Options tab of the field properties dialog box.
-
How to add the new line 'Total' to a report?
Hello
I built a report within the region. I can get the total by checking the 'sum', but I need the word 'total' showing on the same vintage with the total amount. How can I achieve that? or in any different way how to create the new line to show total?
Source debit credit
A 45 44
45 56 B
90 100
Thank you
Victor
Hello
For the classic report show the sum.
Go to the report attributes and click the box check the amount that you want to total.
If you still face any problem-
Please go to the
Workspace - WS_SUNITI
User name: Test
Password: 1234
82863 application ID.
Name of the tab - PSVANS3
Page no 5
Kind regards
Director
-
How to add an imaginary line in the result of the value of a SELECT statement.
Hello all-
I have requirment to add an imaginary line in the result set of a SELECT statement.
For example lets say it is a pay table having the following columns:
Number of Payment_id
status varchar2 (10)
number amount
date of payment_date
so here's the data: -.
Payment_id status amount payment_date
applied 1 100 12/07/2008
2 Reversed 200 01 / 06/2009
Applied 3 300 01 / 07/2009
Here is my SQL
Select * form payment where payment_date > = 01/01/2009
The output will be
2 Reversed 200 01 / 06/2009
Applied 3 300 01 / 07/2009
My desired output is less than
2 Reversed 200 01 / 06/2009
Applied 3 300 01 / 07/2009
reversed-200 2, 01 / 06/2009-(Dummy Row)
Third line here is the imaginary line that I add when the status is "reversed".
I would be very grateful for any help on this...
Thank you
GerardCartesion join against a shadow table is a useful method to create a fictitious line:
with my_tab as (select 1 cust_id, 1 Payment_id, 'Applied' Status, 100 Amount, to_date('12/07/2008', 'mm/dd/yyyy') payment_date from dual union all select 1 cust_id, 2 Payment_id, 'Reversed' Status, 200 Amount, to_date('01/06/2009', 'mm/dd/yyyy') payment_date from dual union all select 1 cust_id, 3 Payment_id, 'Applied' Status, 300 Amount, to_date('01/06/2009', 'mm/dd/yyyy') payment_date from dual union all select 2 cust_id, 1 Payment_id, 'Applied' Status, 100 Amount, to_date('12/07/2008', 'mm/dd/yyyy') payment_date from dual union all select 2 cust_id, 2 Payment_id, 'Reversed' Status, 200 Amount, to_date('01/05/2009', 'mm/dd/yyyy') payment_date from dual union all select 2 cust_id, 3 Payment_id, 'Applied' Status, 300 Amount, to_date('01/06/2009', 'mm/dd/yyyy') payment_date from dual union all select 2 cust_id, 4 Payment_id, 'Reversed' Status, -400 Amount, to_date('01/06/2009', 'mm/dd/yyyy') payment_date from dual union all select 2 cust_id, 5 Payment_id, 'Applied' Status, 500 Amount, to_date('01/07/2009', 'mm/dd/yyyy') payment_date from dual), --- end of mimicking your table dummy as (select 'Reversed' col1, 1 rn from dual union all select 'Reversed' col1, 2 rn from dual) select mt.cust_id, mt.payment_id, mt.status, decode(dummy.rn, 2, -1*mt.amount, mt.amount) amount, mt.payment_date from my_tab mt, dummy where mt.status = dummy.col1 (+) order by mt.cust_id, mt.payment_id, dummy.rn nulls first; CUST_ID PAYMENT_ID STATUS AMOUNT PAYMENT_DATE 1 1 Applied 100 07/12/2008 1 2 Reversed 200 06/01/2009 1 2 Reversed -200 06/01/2009 1 3 Applied 300 06/01/2009 2 1 Applied 100 07/12/2008 2 2 Reversed 200 05/01/2009 2 2 Reversed -200 05/01/2009 2 3 Applied 300 06/01/2009 2 4 Reversed -400 06/01/2009 2 4 Reversed 400 06/01/2009 2 5 Applied 500 07/01/2009
Published by: Boneist on January 7, 2009 23:10
NB. You may need to mess around with the order if that is not in the order you want. You did not mention what the rules were for all orders expected, so I composed my own * {;-)Also, I added a (cust_id) identifier to differentiate different types of payments, as is usually the case. Remove unless it is not applicable to your case.
-
How to add the large number of RoboHelp docs to SharePoint version control
I'm on RH11 and some versions of SharePoint, which I'm not sure. I am able to add a document to both HR SharePoint Versioning (file > Version control), but I must have about 49 000 with version control in RoboHelp. I was able to get the files in SharePoint, but now I have to get RoboHelp to be managing the large number of files.
How can I get RoboHelp to give version control a large number of documents at a time?
Are - you're talking about individual files or projects? I guess that the individual, since 49 000 project files can be a bit heavy.
If you add a project to version control, RoboHelp will add all the files in SharePoint. This will take a little time (set HR to add it before you go out for lunch or before going home). At the end of the day, you can check in the entire project in a single click. Or you see something else?
You can still manipulate the files .apj of HR to very quickly add loads of files to a project. If you have files in SharePoint, you can update the FPJ files (use the following script: missing subject Fixer). Then remove the CPD and start the project.
-
EPub - how to add invisible hyperlinks + lines of separation?
Hello
I use Indesign to create an epub.
I would like to add a link that will take you to another section, but I don't want the other section that you are taken to a different aspect (e.g. as a blue link). How arrival point invisible?
How can I add a black dividing line that separates a part of one chapter of another? Ive thought to use the underscore character or less symbol but output will be different on each ereader. I don't want a black line which is spread over two lines.
Val
Hypertext links often have an appearance in an EPUB. You want there to be some change if someone knows to click. But the destinations don't look otherwise.
As for the creation of black separation lines, I personally don't think that would look very good. Usually, you want sections or chapters to start on a new page. There are two ways to do this. You can use the export settings to choose a paragraph style that causes a page break. Or, if you do a book, each file in a book will start on a new page.
But if you want to use a rule, you need to learn more about CSS to do the formatting. You can do that in InDesign. I would suggest books of Elizabeth Castro at this address:
EBooks - EPUB directly point shaped
Or watch videos of Anne-Marie Concepcion on Lynda.com.
-
How to add a padding lines spark and mx datagrid
Hi all
I want to add the top and lower padding in each line of the spark and mx datagrid control.
Please help me how do.
I think that in Spark you add padding in the rendering engine. In mx, you should bea wheat
to set paddingTop/paddingBottom styles.
-
How to add views horizontally and use it on parchment
Hello
I need two views to be placed horizontally, but they should be seen by a (one at a time). Need to place them in a scrolling when I scroll, the second point of view should be displayed. How can I do?
Hello
He works in my code.
import bb.cascades 1.0 Page { content: ScrollView { scrollViewProperties.scrollMode: ScrollMode.Horizontal Container { layout: StackLayout { orientation: LayoutOrientation.LeftToRight } Container { Button { text: "Button" } } Container { Button { text: "Button" } } Container { Button { text: "Button" } } } } }
-
How to add a new line at the top of manual tabular form
I have a manual tabular form. I am trying to add a line at the top of the form, instead of the new line of being displayed at the bottom. any ideas are appreciated.
Thank you
SuryaIf you did a manual tabular presentation using a select statement as follows:
Choose option...
Union of all the
Select... of doubleTry to simply reverse the two select:
Select... of double
Union of all the
Choose option...I did this in an application, and it works.
(I've never tried with sorting...)
Concerning
Stefano Corradi -
How would add labels to lines and columns of a spreadsheet?
I got some data of an oscilloscope, which has about 500 lines I want to the label at the time of measurement (1ms, 2ms, 3ms...) and about 10 columns I want to mark it with a corresponding wavelength (800 nm, 805nm, 810nm...). Any idea or links to examples would be appreciated.
Gregory
Before you write data in your spreadsheet file, write a line of column names. Just make a table 1 d of strings with column names. Write the 1 d array to the worksheet. If you want labels on each line, you will need to convert your data into strings. So, you will have a table 2D-string data. Create a table 1 d of your line labels. Insert in the table to insert your picture label in the data table, making sure to wire a 0 in the index of the column, not the index of the row. This will put your labels in the first column. Then write the 2D table in the spreadsheet file.
-
Here, the title is a bit confusing, I completely realize that but here's what I'm trying to accomplish. I have a table with a column that repeats.
the table looks like this.
create table testCheck (check_num varchar2(20), amount number(17,2), invh_Code varchar2(20))
and it contains data as follows
INSERT INTO "TESTCHECK" (CHECK_NUM, AMOUNT, INVH_CODE) VALUES ('001', '50', '1123') INSERT INTO "TESTCHECK" (CHECK_NUM, AMOUNT, INVH_CODE) VALUES ('001', '50', '1123') INSERT INTO "TESTCHECK" (CHECK_NUM, AMOUNT, INVH_CODE) VALUES ('002', '100', '1234'
I would like to write a query that would give me of the separate check_num, but put an asterisk on the elements that are in fact double.
so in other words expected result in this case is as follows.
"CHECK_NUM" "AMOUNT" "INVH_CODE" "001*" 50 "1123" "002" 100 "1234"
I could go as far as getting unique values, but what I can't do, it is understand for the life of me how to put the asterisk in there.
Here's my query.
with Checkquery as ( SELECT count(*) over (partition by CHECK_NUM order by CHECK_NUM ROWS UNBOUNDED PRECEDING ) thiscount, CHECK_NUM, AMOUNT, INVH_CODE FROM TESTCHECK group by check_num, AMOUNT, INVH_CODE) select check_num, amount,invh_Code from Checkquery where thiscount ='1';
can someone tell me please in the right direction. I just want to identify the dups put an asterisk on the record and then only select records.
According to your last post, you keep what is displayed for the other columns, so why display them at all, so this will do the job.
SELECT check_num.
Decode (to_char (Count (*)), '1', NULL,'* ') dup_checks
TO define by test
GROUP BY check_num;
If you want to view the other columns, you have two choices. You must either put some sort of aggregate function in the list of selection, such as min, max, or sum, or they need to be part of the group.
Concerning
André
Maybe you are looking for
-
QuestionI have made a subdirectory for libflashplayer, therefore, but it cannot move to this location with cp or mv
-
ThinkPad Twist: Keyboard to screen sounds
Does anyone know how to disable the annoying clicks when you hit a key on the keyboard touchscreen twist? My sanity remaining thank you in advance.
-
How to read the worksheet for setpoint speed using the speed control (Closed Loop)
My VI is able to go through a series of speed reference points that lie in a sort of constant matrix. I have to be able to go through a series of hundreds of game points, and fill in the constant table whenever I have a new profile to test don't will
-
WRT160N LOSES INTERNET CONNECTIVITY
I have a wrt160n connected to a Motorola ATT DSL Modem.I only have intermittent internet connectivity. He worked awhile then lose internet connectivity on my XP computer plugged directly on the router, as well as on my laptop vista home wireless. I w
-
Webcam doesn't work is not in the new laptop
Hello you can someone plz help me.i got a new laptop but the webcam is work.am new to computers a need all the help I can get thanks