How to add a VMXNET3 adapter

Similar Questions

• Unable to choose VMXNET3 adapter

  A small backstory - ESX 5.5, VM running is VyOS (which is running a Debian flavor).  We add a 10Gig NIC to the host and would like to take advantage of the faster speeds on virtual machines.  VyOS is currently using the E1000 adapter, and the drop-down list of adapter inside the map Add Wizard window lists only E1000 (with no VMXNET3).

  

  Strangely, create a new VM VyOS from scratch (using the same ISO installation), I am able to choose between E1000 or VMXNET3 initial VM Wizard, and this new virtual machine recognizes the VMXNET3 adapter (and 10Gig speeds).  I'd rather not have to migrate to this new virtual machine - how can I add the VMXNET3 adapter to the existing VM VyOS?

  Exactly as I thought:
  the new virtual machine has two PCI-express ports. The old man uses only PCI-ports.
  To reset the mainboard remove all lines that start with pci *, value of the a different option of 'other-64' guestOS and start the virtual machine once.
  After that, you should be able to use the graphical interface

• How to add the software iSCSI adapter in vSphere, ESXi 5.0?

  Hello

  Please give me the steps to add the software iSCSI adapter in vSphere, ESXi 5.0.

  Thank you.

  Hello

  In an earlier version of VMware ESXi software iSCSI adapter was included in the list of the storage card, but is not in the case of VMware ESXi 5.0. In ESXi 5.0 iSCSI adapters are not listed by default and must be activated first before we go away from configuration.

  How to add iSCSI adapter in ESXi 5 check the link below

  http://www.google.co.in/#sclient=psy&hl=en&source=hp&q=How+to+add+Software+iSCSI+Adaptor+in+vSphere+ESXi+5.0+Site%3A+blog.srinfotec.com&pbx=1&oq=How+to+add+Software+iSCSI+Adaptor+in+vSphere+ESXi+5.0+Site:+blog.srinfotec.com&aq=f&aqi=&aql=&gs_sm=e&gs_upl=9181l21561l0l21875l33l30l4l0l0l0l736l10898l3-8.7.7.1l23l0&bav=on.2,or.r_gc.r_pw.&fp=1ad7a99e02298f12&biw=1366&bih=647

  or

  http://blog.srinfotec.com/?p=178

  concerning

  Rohit

• How to add records to a file via the file adapter.

  Hi all
  How to add records to a file via the file adapter.
  
  I must read data from the database and need to add all the records in a file.
  
  Thanks in advance.

  Hello

  I think you have a while loop to hit the DB in your process (as you said you need to extract data from DB 10 times if 1000 rec is here)
  First sopy your DB O/P to a var
  and second time add to previous data. (Otherwise you can directly use Add to start instead of copy and add)
  When the loop ends, you can turn to the file adapter Var.

  Otherwise, you can configure yourFileadapter as it will be aapend current recordings for previous records.

  You can use 'Append = true' in your adapter wsdl file.
  It will add the previous records to existing records in the same file.

  Concerning
  PavanKumar.M

• How to add a monitor HP Envy 23 IPS to a desire to tilt all in one

  We have a 27-k150xt want tilt all-in-one with the Windows 8.1 operating system.

  How do add us a HP Envy 23 inch monitor IPS P # E1K96-60001?

  Thanks in advance for your time and help!

  Hello

  The HDMI port on the tilt is IN a port. You need something similar to the following device (called USB video adapter):

  http://www.harveynorman.com.au/Targus-USB-3-0-superspeedtm-dual-video-adapter.html

  Kind regards.

• How to add "Add to selection windows media" to the context menu of the Explorer in Windows Vista 32/WMP 11?

  Hello. I am currently looking for a way to queue files flv and mp4 in WMP 11 in Windows Vista. I used to be able to do with Shark007 Windows Vista installed Codec, but I recently replaced it with a combination of ffdshow, Haali Media Splitter and open source Flash Video Splitter; This combination has been recommended as being superior to my old codec pack.

  I found a similar topic and solution, for Windows 7 / WMP 12:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/how-to-add-add-to-Windows-Media-playlist-to/eb5ff6a0-5260-47de-903F-00bca38edc14

  Someone knows how to adapt the solution here for use with Vista?

  Copy-paste all below into Notepad and save it as FLVMP4Enqueue.reg. Then double-click on this file to add it to the registry. After that, you may have to reassociate the FLV/MP4 files with WMP, via Control Panel - default programs .

  -----------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\.flv]
  @= "flvfile.

  [HKEY_CLASSES_ROOT\flvfile\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\flvfile\shellex\ContextMenuHandlers\WMPAddToPlaylist]
  @= "{F1B9284F-E9DC-4e68-9D7E-42362A59F0FD}".

  [HKEY_CLASSES_ROOT\flvfile\shellex\ContextMenuHandlers\WMPPlayAsPlaylist]
  @= "{CE3FB1D1-02AE-4a5f-A6E9-D9F1B4073E6C}".

  [HKEY_CLASSES_ROOT\.mp4]
  @= "mp4file".

  [HKEY_CLASSES_ROOT\mp4file\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\mp4file\shellex\ContextMenuHandlers\WMPAddToPlaylist]
  @= "{F1B9284F-E9DC-4e68-9D7E-42362A59F0FD}".

  [HKEY_CLASSES_ROOT\mp4file\shellex\ContextMenuHandlers\WMPPlayAsPlaylist]
  @= "{CE3FB1D1-02AE-4a5f-A6E9-D9F1B4073E6C}".

• Enabling Jumbo frames on VMXNET3 adapter in Windows Server 2012

  Hello everyone on the forums of wonderful Equallogic :)

  We have a PS4100X of the virtual computer running on vSphere 5.1 EQL. Everything works very well, and we are about to migrate a VM 2012 SQL our database. I did some research on the issue of whether we should allow the frames extended on the VMXNET3 adapter in the virtual machine.

  Reading this white paper, it seems there are large performance benefits to enable jumbo frames and a few other options in the NETWORK adapter settings:

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20403565.aspx

  Just curious as to how other people and if they saw an improvement in performance. Someone at - he had experience with this?

  Thank you

  Lee

  Frames being good or bad, is highly dependent on the switching infrastructure.   If the switches do not manage flowcontrol and frames, then performance could be worse with frames enabled.

  If the switches are not on the list certified for EQL tables, I tend to start with the standard frames, get a baseline run, then try frames gradually and do things of course worsen.

  Extended frames may provide an advantage, he will never be a huge increase, but it improves the efficiency of the network and could reduce the overhead of the processor.    Which are not mandatory for EQL iSCSI environments.

  Please check best practices with document ESX.  That can really help to maximize your performance with storage EQL.

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20434601.aspx

  Kind regards

• vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server

  Hello!

  We have a server windows 2012 R2 with MSSQL server 2014.

  The client software uses the jdbc for database connection. If customers make a query which collects a massive amount of data the whole thing slowed down after a while.

  Then, his need to wait 10-20 minutes to speed up again. I have tested and tried everything.

  -measure the ethernet parameters

  -replace the cables by cat7

  -installed a virtual machine with the windows client and the real customer use the virtual environment via rdp

  -activated the RSS in the vmxnet3 advanced settings and windows

  -the mode SplitRx in vcenter vm settings and disabled ethernet Coalescent too

  -set the VM to high latency

  -tried to migrate the virtual machine to another host

  Not for their help. If a massive sql query is run first its great, then the need for a second or more to check a single record.

  checked the vm cpu stress but its less than 5% all the time. Checked the network with wireshark, there are a lot of small packets but nothing big. The bandwidth used is still low.

  When its idle delay after two packets will increase from a few ms to 400-500 ms.

  Our most powerful server is an HP DL380 G9 with two octa core Xeon processor 384 GB of ram, full SSD datastore. Its a lightning fast host.

  The virtual machine have 8 core cpu and 64 GB of ram.

  No matter where am I up the virtual machine or how many resources provide the custom aisle question.

  The strange thing is when customers slowed down I can copy large files between the client and the server with fast speed, so the slow sql.

  I can solved this question if I use the ethernet E1000 instead of the VMXNET3 adapter, but E1000 have much more load and the server need to transfer big files too, not only the sql service.

  Vmxnet3 much faster and have less overhead, but this question of sql, I have a problem with that. So I go back to the E1000 for now. Its slower eat more cpu but the sql connections works very well without any problems.

  Can someone tell me what I can try harder to identify the vmxnet3 problem? I really need it to improve network performance and lower overhead, but the rapid sql is the top priority.

  Thank you!!!

  We had exactly the same problem on our SQL servers once upgraded to Vsphere6.This is due to Receive Segment coalescence feature in new VMXNET3-nics on Win 2012.

  More details here: http://nickmarshall.com.au/blog/2015/7/24/vsphere-6-hardware-version-11

  The best way to solve this problem is to turn it off completely in the server operating system (in the admin command prompt):

  netsh int tcp set global rsc = disabled

  
  

  Check with:

  
  

  netsh int tcp show global

  It's fast and easy without downtime or disruptions and involves no change types of nic.

  After doing this on all our SQL and application servers, everything was ok.

  
  

  
  

• How to add the device (eth1) after the command 'neat' calls 'Configure Network'?

  People,
  
  Hello. I want to install 2-node RAC Oracle 11 GR 2 VMPlayer 3 System. The host OS is Windows 7. Oracle Linux 5.6 is the guest operating system. 2 nodes (2 Virtual Machines) are RAC1 and RAC2.
  
  We must create the public IP address and IP private for each virtual computer (RAC! and RAC2). IP addresses public (eth0) connect RAC1 and RAC2 of shared storage. The private IPS (eth1) connect RAC1 and RAC2.
  
  In Oracle Linux 5.6, the command "neat" to the root user calls the configuration of the network (5 tabs) as follows:
  
  Devices | Material | IPsec | DNS | Hosts
  
  In the "Devices" tab, I created the public IP address for RAC1 whose nom_peripherique is etho.
  But I don't know how to add another device 'eth1' in the 'Devices' tab to create the private IP address.
  Thus, the network cannot be implemented.
  
  Can any folk tell me how to add another device (eth1) in the 'Devices' tab after the "neat" command calls "Network Configuration"?

  user8860348 wrote:
  Folk,

  Hello. Thanks much for the reply.

  In the directory "/ etc/sysconfig/network-scripts", there is a file 'ifcfg-eth0"which contain a public IP address.

  But there is no file "ifcfg-eth1" that must be a private IP address.
  What is the reason that there is no device 'eth1' in the 'Devices' tab in the Network Configuration window?
  Do we need to create a file 'ifcfg-eth1 '?
  What should be the content of 'ifcfg-eth1 '?

  Did you create a second NETWORK adapter to the virtual machine?

• How to add contacts to my Apple Watch?

  Can someone explain how to add contacts to my Apple Watch 2, watch OS 3

  Hello

  Apple Watch is not a Contacts application and it is not possible to create new contacts on your watch.

  When make calls or send new messages, existing between in contact with instead are selectable via the phone and applications or Messages using Siri / the microphone to dictate a phone number:

  Instructions are available here:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e

• How to add friends again Apple Watch

  How to add a friend again Apple Watch?

  Hello

  Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

  When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e

• How to add new folders in thunderbird for mac 38.2.0 POP3

  Switch PC to a macbook pro. Downloaded Thunderbird 38.2.0. I am trying to add new folders, under local folders. Trash and Outbox are in local folders, but I don't see how to add folders to organize my mail.

  Right-click

• How to add podcasts to an existing account?

  I already downloaded 4 to 5 podcasts on my account, but I can't understand how I add another. I can repeat the process, but then I should add these 5 previous podcasts.

  I can't understand how it just add to my account.

  Everyone knows this?

  Thank you!

  Do you mean "podcasts" or do you mean "episodes"? A podcast is, indeed, the 'wrapper' for the episodes and has its own page in the iTunes Store, in which episodes show. The Store and iTunes work stream, which contains the information in a specific format. All what you need to do is add an episode to the food and the re - publish: subscribers in iTunes will see the new episode almost immediately and the store will be updated in 1 or 2 days.

  If you want to add a new podcast, with its own distinct episodes of your existing, just go to http://podcastsconnect.apple.com and click on the icon "+" at the top left to add. This will not affect your existing podcast.

  When you have any questions you should post the URL of your feed and iTunes Store page, because without them, we can give very general answers.

• How to add another search engine?

  Hi, guys! I have been using your browser for years on my PC and for about half a year on my cell phone. I used to use ie, opera, chrome, but finally I chose your browser for mobile and PC because your application is the best! It is incomparable! I have a simple question on the mobile version - how to add my favorite search yandex.ru for list provider do its default value? I did a tip of the parameters but it doesn't work. And why don't you make also much easier by adding a button like 'Add another search site' in the settings? Apart from please give advise me how to activate the English spelling? Thank you in advance for help.

  You should be able to find it at http://mycroftproject.com/search-engines.html?name=yandex.ru

  Search engines are managed in the settings of Firefox as described in https://support.mozilla.org/en-US/kb/manage-my-default-search-engines-firefox-android

• How to add Russian keyboard to the phone of flame with the construction of the aurora

  I have Mozilla flame phone.
  I change the stock software for:
  Boot2Gecko 2.1.0.0 - prerelease.
  Version of the platform: 34.0.
  Channel: aurora.

  But has no Russian keyboard. How to add the Russian keyboard on track.
  Thank you!

  p.s. I have tha same problem with 2.0. I build keyboard gaia repo git with included Russian keyboard app and install it. Maybe there is another way?

  The Russian keyboard should be available in these versions, if they are not, please also create a report bug with accurate information, equip and peripheral on the device. The component would be Gaia::System:Window

  In the meantime, here are the instructions on how to build with several locale if the local Russian keyboard is not available:
  https://developer.Mozilla.org/en-us/F.../building#Building_multilocale

  If you need help with this, we are happy to help you.