How to add an anchor point on the exact spot that it overlaps with another line?

Similar Questions

• Placement of anchor point at the exact Center of a circle object

  Hello.

  Is it possible to locate exactly at the center of a circle of sequels? I made a circle perfect photo editing program and given the limits of the layer corresponded to the edges of the circle, I thought that this anchor point after effects will be exactly in the Center. but this is not the case - the anchor point is at the center of a composition.

  I imported the .psd layer circle as well as other layers in the form of composition, that it has a matter? As I said, the circle layer limits would correspond to the edges of the circles, and not with the edges of the canvas in my photo editing program. But whe I the circle layer solo, I see that the anchor point is at the center of a composition, not the layer.

  So now I have to place the anchor in the Middle manually, and it's pretty hard to do perfectly. When I rotate the circle, it shakes and wobbles.

  Your mistake is that you did not open the composition created when you imported the PSD as composition. Instead, you added all the layers of a new composition. After that effects will do all the work for you, simply open the publication that was created.

• I need to clean reinstal my OS. How can I back up and reinstall the POP accounts that I use with Thunderbird?

  Hello

  I use thunderbird for 3 e-mail accounts (POP, no message left on the server server), and I need returned my OS (win7).
  How can I back up and reinstall account 3 without losing records "Inbox" and "sent"?

  Is it enough to copy the folders in Thunderbird/Profiles/Default/Mail, reinstall the OS and Thunderbird, create 3 email accounts in Thunderbird and replace the files newly created in the path above with old mail folders?

  Thank you very much
  l

  So basically I have reinstall 1 backup the entire contents of the folder Thunderbird lies in AppData/Roaming 2 OS and Thunderbird 3 Replace folder Thunderbird above with the old

  Yes, that's all!

  Blockquotes <>what accounts? < / blockquote >
  The profile that you have is all you need. It is ' just ' copy him on the same place in your new configuration.

  Oh and make sure Thunderbird is closed when you perform your copy.

• Illustrator cc 2014 adds anchor points to the guides

  What is happening with the Illustrator CC 2014! I placed a guide for where to add a cliked of anchor point on the Add anchor point tool, but when I select the object I want to add the anchor point that adds an anchor point to the guide! so I blocked the thinking guide that would solve the problem, that it is then for me a poster that says attention please use on a segment of the path it still considers that the guide is a path!

  TIF,

  Are you sure that you select the path, not the guid?

  Maybe it's time to look at the list.

  The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• How set the anchor point of the composition (no layer)

  Hi people,

  I have a composition very long and skinny.  In a far corner of the comp, I'm turning a layer on the x axis, but I want to turn backward in relationship to itself, and NOT with regard to the focus of the long and lean model.  I changed the anchor point of the layer itself to be the center of the layer, but it always tilted toward the center of the model:

  

  How can I change the anchor point of the comp itself?  I tried to change the position of 'anchor' in the grid 3 x 3 in the composition settings panel, but that seemed to have no effect.  Thank you!

  mbirame wrote:

  It makes sense, but it surprises me. If the point of leakage of a 3D object will always be in the center of the composition?

  No.... Just like in real life, point of view is controlled by the position of the camera, the angle of view is controlled by the focal length, and the center of the view is always on an infinite perpendicular line between the center of the plan of the film (point of interest). The human eye is not tilt shift, like the cameras was discovered and no not the camera AE (or no matter what camera I've ever seen in a 3D application, so you can not control the perspective by winning the film plane or by moving the center of the lens as you can do with a camera or a tilt shift lens.

  The vanishing point is where the parallel lines converge and depends on the angle of parallel lines to the camera.

  I hope that makes sense.

  Here's the thing about nesting more small compositions in a larger. If you put 3D layers in your nested compositions and condense the transformations, then the camera in the main computer will interact with the 3D layers in nested compositions. If you do not condense the transformations there will be no change in perspective as the camera moves into the main computer. If you do not condense the transformations and you make the 3D before comps will organize just flat cards in the main 3D model space.

  One last thing. Only the Active camera view has perspective. All custom views are orthogonal - no perspective. This

  It will take a minute, but you should be able to wrap your head around that. Here is a demonstration of model how global collapse of transformations. Feel free to play with it. Collapse Transformations.aep (Note: your browser may add an extension .txt to the app file - just delete it)

  

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• Unable to set the anchor points of the path when the keyframes turned on...

  I have a layer of irregular shape who I am deformation over time (from smallest to largest). I am able to set the anchor points of the path to the forms I want, but once I put two keyframes for the path I'm interpolating a slide, I'm more able to set the anchor points for minor changes, for example, I am unable to draw the Bézier handles. If I disable keyframes, then I am allowed to adjust the anchor again, but that means I have to start whenever I need to make an adjustment. I have run successfully the concept but need to change several layers of form in this way, and not having is not access to the Bézier handles point of anchorage slows productivity.

  Any ideas?

  Thanks in advance,

  Chris

  12.2.1.5 AE

  Mac 10.9.4

  Sorry, I missed the rather obscure reference to an expression in the first post you. Had, I had to pay more attention I'd say disable the expression to change the path, and then select. Not being able to select a top with the marks of perfectly logical on expression because it is turned on with the full path is selected by the expression of all time. This is how work expressions. This seems to be a lot of trouble to go just to change the "timing" of a couple of keyframes.

• Add Remote Anchor Points?

  I often need to add anchor points to a shape when I bring it in Cinema 4 d to extrude and deform.

  The object > path > add Anchor Points only adds an additional anchor between the existing anchor points, doubling the density every time his race.

  It's not ideal for shapes with segments very long and very short segments. Short segments have not need subdividing, but long segments need several subdivisions.

  Is there a script or plug-in that can add anchors, based on the distance? Such as: Add an additional anchor point to a path every 10 mm?

  

  Use the scratch effect. Set the size to 0

• Moving anchor points and the whole shape gets distorted to change the line weight

  I have a fairly simple drawing that I drew in a larger size, so I could be more specific with it, and now I want to reduce up to the finished size and thicken the line, but when I make the line thicker, my anchor points are moving and the whole drawing is distorted.

  Using Adobe Illustrator of 24 years, I never saw that happen. When I click on the "up" arrow in the stroke palette a lot of time to gradually increase the thickness of line, I can watch made anchor 'walk' around like my shape gets distorted.

  If I go to the place a numeric value for the thickness of line, it doesn't.

  However, if I use the scale tool to shrink the design down to the size of 10% or 20%, or whatever, with traits of the scale and effects UNCHECKED, yet once, move the anchor points and the drawing is distorted.

  It's all about a brand new installation of Illustrator CS 6 for Mac (although I use CS 6 for about 2 years now, my hardrive crashed this past weekend and I had to reinstall everything).

  I missed a little box somewhere that I never saw elsewhere that is what actually happen?

  This post editing to add:

  Also, some of these objects in my drawing I cannot change the race less than 1 point thickness. If I choisis.5 ou.25 pt in the context menu, or even if I enter the numeric value, it jumps to 1 point. Other objects in the drawing are not.

  These objects in question are "rounded rectangle" forms I used the scissors tools to cut and then used the "join" command to put them as well as other forms that have been "scissored"as well."

  All forms of "Ellipse" and "Rounded Rectangle" that I have left intact do not exhibit this problem with stroke and distortion.

  You are being bitten by the Align-to - pixel grid. Select the entire document and go to the transformation Panel and turn off snap to Pixel - grid at the bottom of the Panel. Then go into the rollout (small triangle in the upper-right) and disable align objects on the pixel grid.

• How to add a data center on the virtual center via VI client server?

  How to add a data center on the virtual center via VI client server?

  I formatted ESX server & ESX Server Update installed keeping the data center on the storage (of many desktop computers)

  Now I have fresh installed a new server of virtual & added the ESX Server, but I'm unable to reattach existing data centers on storage.

  What will be the way to import of existing data on server Center virtual center?

  Help, please...

  Is ' VMware-VMimporter - 2.0.0 - 30557 "is the software through which I can solve my problem?

  You need to browse each data store, go to the folder of the virtual machine, right-click on the *.vmx file and add it to your inventory.

  Andrea

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Select the anchor point of the Group and anchor it to the PointInsertion

  Hi all

  How to select the anchor point of the Group and dock it at the point of insertion of the document in indesign cs5.5 using javascript or vb.net

  You need get a reference to your group - call the myGroup - and the other to the PointInsertion where you want it anchored - call - the myIP. Given those, you can achieve your goal (in CS5 or later) by:

  myGroup.anchoredObjectSettings.insertAnchoredObject (myIP);

  You can specify a second parameter, if you want that specifies the position of anchor:

  myGroup.anchoredObjectSettings.insertAnchoredObject (myIP, AnchorPosition.anchored);

  That should help you get started.

  Dave

• How to add a variable entry in the Oracle reports (i.e. &amp; T_DATE)

  Hello, all:
  
  Quickly, I'm trying to convert a report of PL/SQL to Oracle 10 g reports in order to obtain better formatting control. I get an error message regarding the & variable T_DATE. I looked in the doc online as to how this is done, nothing will do. Please get an idea as to how to proceed please.
  

  select 
  ALM_OG_ID,
  ALM_OG_ACTIVITY_DATE,
  --ALM_OG_NAME,
  RTRIM(ALM_OG_FIRST_NAME) "FIRST NAME",
  RTRIM(ALM_OG_LAST_NAME) "LAST NAME",
  ALM_OG_CAMPAIGN_CODE, 
  ALM_OG_OTHER_ITEM_CODE_DESC,
  ALM_OG_ACCI_CODE, 
  ALM_OG_TYPE_IND,
  ALM_OG_TOTAL_AMOUNT
  From WSUALUMNI.WSU_ONLINE_GIVING_TABLE
  WHERE to_date(ALM_OG_ACTIVITY_DATE, 'DD-mon-YY')                    >=                       '&v_date'
  ORDER BY  ALM_OG_TYPE_IND, ALM_OG_CAMPAIGN_CODE;

  Use a link instead of a lexical parameter setting. Remove the single quotes and ampersand. Add then two points if the parameter looks like this:

  WHERE to_date(ALM_OG_ACTIVITY_DATE, 'DD-mon-YY')    >=    :v_date
  

  Reports will create the setting use to you when you close the query window. In the navigation of the object, expand data model and user settings to see here. You can change the data type and other properties there.

• How to add a new language to the language and region of the Panel

  Hello
  Setting preferences in Mac OS X, I could ' t help noticing the huge amount of languages available in the Mac OS X El Capitan. Located in same languages like Klingon, Navajo and Latin - and of course, this looks like a great tribute to the rich diversity of languages in humanity. However, Mac OS X El Capitan still missing a language - my own. How can I add another language to the language and region of the Panel? How Klingon and Latin is?
  Of course, I have this Internet search, but nine out of ten results were some tutorials explaining how to add an EXISTING language to the ones I already have.

  Thank you.

  Rui Valente

  You just 'Add' a language. You would have to edit all applications to create strings of replacement for all menus, dialog messages, buttons, etc., that it doesn't translate from one language to the other. Each application has a list of strings mapped to the display string for each supported language. The localized string replaces the generic string in the user interface element.

  You can try to contact Apple and volunteer to locate the operating system, they would have confidence in you (unlikely) or hire a person to validate your work.

• How to add white Gaussian noise to the picture of her and her negative?

  How to add white Gaussian noise to the picture of her and her negative?

  Is that what you're trying to accomplish:

  

  TO:

  

  Here's the code to do.

  

  Michel

• How to add my link (folder) to the side RIGHT of the Start Menu?

  How to add my link (folder) to the side RIGHT of the Start Menu? I mean under my documents my music.

  Do I need a registry change or easy way?

  See my post here.

  Replace "Set Program Access and Defaults" Start Menu XP with trash:
  http://groups.Google.com/group/Microsoft.public.WindowsXP.customize/browse_thread/thread/1479ca45f5598b84/91bef4c26cd81c6b?q=replace+%7B2559A1F7-21D7-11D4-BDAF-00C04F60B9F0%7d
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]