Wireless key Log-On where? !!

Similar Questions

• Error - the Intel PROSet/Wireless event log Service stopped working andwas closed

  Whenever I am re-booting, I get this error window:

  "Error - Service of Intel PROSet/Wireless event log stopped working andwas closed."

  It started a month ago. I can't tell at all what I did--except that I installed a router Linksys Cisco Wireless (802.11 N), replacing an old Netgear device (802.11 G).  My wireless feature works well and I really do not notice the effects to receive this error message.  I don't remember having this error immediately after installation of Linksys.  I "think" some time elapsed before the error started - but I don't re-boot often, so it could be related.

  I'm on Vista Ultimate OS, with Service Pack 2.

  Intel (R) Core (TM) 2 DUO CPU T9400

  Hello

  I was able to find a link from the site intel, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.

  http://communities.Intel.com/message/69976

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  However you can make the boot which would help you to cut down on the service that is causing this problem.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Let us know if this helps

  Concerning
  Anthony.

• [R] Intel PROSet/Wireless event log Service stopped working. What is c? Please help me.

  What log the events ofIntel PROSet/Wireless Service has stopped working? Please help me.

  Hi Tariq.khan,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I was able to find a link from the Intel site, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.

  [R] Intel PROSet/Wireless event log Service stopped working

  http://communities.Intel.com/message/69976

   

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Let us know if that helps.

• E4200 access via a browser is low. Password and wireless keys must be the same.

  I tried to change my admin password to something I just want to know. When I did, I was told that the key and wireless admin password must be the same. What madness is this? I have to give my children the key to enter the system there. I put parental controls for device there. Now all owe it do is google this router and read and then they can understand the key and the password are the same. Log in to the router and change parental controls.

  I thought about a work around that. I would give them the key to access as a guest. It was great if they were going to use a browser to surf the Web. Guest access does not work for me on other devices such as iPods and iPads. In my tests on these types of devices applications cannot get on the Internet with guest access. That a browser can.

  Thoughts from cisco? No help from cisco on this?

  Do not use Cisco Connect and you'll be able to have the password admin and "wireless key" be different without problem.  I don't know why Cisco Connect is doing this, but if you go to http://192.168.1.1 with your web browser after using Cisco Connect and you connect to the web GUI admin here, you can manually set your admin password and the "wireless key" However desired.

• My @ key is now where my "inverted comma key once and visaversa, how can I change this back?

  My @ key is now where my ' formerly (comma double inverted) and vice versa, how can I change this back?  My computer is Windows 7, running 32-bit and 64-bit on split by car?  Using the mouse and Logitech wireless key board.

  reversed double comma - these are quotes haha.

  In any case, you can fix this by going to your language and regional settings and put in the correct language (version USA or UK English keyboard, using keys for @ and "")

• After you have installed windows 10, I can't use apple wireless key board and mouse magic. any solution

  I am facing a strange situation. I used Win7 on BootCamp. Last week attempted to upgrade to Win10. After the upgrade is perfect, I could not connect to the wifi or wired internet. called the Apple support, Windows supports, no one would help you. Downgraded to Win7, after decommissioning, apple wireless key board and mouse magic does not work. Called Apple support, after nearly 90 minutes of interaction with them, ZERO, no solution result. Apple support told me that an Apple engineer will call me at my appointed time. A call came, but no one answered.

  So, today did a clean install of Win10 through BootCamp. All right, BUT I still can't use apple wireless key board and mouse magic. Can someone help me with this situation? Apple & Microsoft support engineers have failed to help out me. Thanks in advance.

  Have you installed the Boot Camp Windows Support software?

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

• Wireless key code can I find this on my PC anywhere

  I lost the wireless keys and need to connect to another currency.

  You will find on PC anywhere?

  Hello

  You can see the following article on how to set the wireless network key.

  http://support.Microsoft.com/kb/870702

  You can also connect to your router if you know the password and you will find the WEP key.

• I have a vista 64 bit but loast company key a dvd where I can download vista Professional 64-bit?

  I have a vista 64 bit but loast company key a dvd where I can download vista Business 64-bit on my HP?

  You can download Vista from Digital River (MS distribution partner) by using the links on this site...

  http://www.heidoc.NET/Joomla/technology-science/Microsoft

• I accidentally turn off my WIFI! When I go to it says disable 'status' HP wireless assistant but no, where do see how to activate it again, can someone help please!

  hen I go to it says disable 'status' HP wireless assistant but no, where do not see how to activate it again, can someone help please!

  I went to something help I have and it says to reboot my laptop, press F10, then go to system configuration > integrated device options > LAN/WLAN switching > activate. I restarted my laptop and pressed F10 but it come with the system configuration...

  Hi you can access device manager and enable you WLAN, or simply more portable computers HP come with a button to toggle WLAN, please check the color of the light wireless button and press again to see if it changes color, if not you have successfully activated the WLAN again.

  You can also try

  1. Reboot the laptop.
  2. Press F10 .
  3. Enter the BIOS .
  4. Select Advanced options .
  5. Select the Device option , WLAN/LAN switching.
  6. Switch to Activate .
  7. Select save changes and exit .

  If you could tell the laptop model and the version of the operating system you use that I'll be able to give you more accurate and simpler measures

• Caps, a light orange and flashing on the wireless key

  I'm so lost. My first month with this brand new laptop was problems he gave me a blue screen and shut down on me. I thought it was normal that it was my very first laptop. My computer hp Pavilion laptop is only 3 years but now it has a flashing light of caps and a light orange on the wireless key. I tried to reset hard but nothing does. I have been accustomed stop on me and restarting again but this time on that he would not return. I called Hp tech and now I said that this computer is obsolete and cannot be resolved. It still looks new, but I can't believe that you guys can't do anything for me. Please help, I can't afford a new laptop & I use this laptop for my work part-time, now I can't use it for work.
  Model: dv6-3134nr

  Hi lele17,

  One blink indicates a failure of the CPU. You will need to have to replace to make it work again. Maintenance and Service Guide, I have provided in my last post will show you how to replace and give you compatible part numbers to replace. You can find this information on page 94.

• How can I configure Windows 8 to remember my wireless keys?

  How can I configure Windows 8 to remember my wireless keys?  I have 4 SSID in my house, and whenever I connect to either of these wireless networks I re - enter the wireless key, even if I have already connected to it several times before.  Windows 7 remembers them as do Apple products.  It's really annoying.  (Please do not recommend 3rd party stupid WiFi8 app - it is undesirable)

  Yes, I meant Windows Defender, I apologize.

  I solved my problem by taking the direction of the Intel PROSet/Wireless WiFi connection utility WiFi card. I have the system configured to allow the Intel tools manage the WiFi, but Intel for some reason any would forget that he had the credentials. When I put management back to Windows 8, the problems disappeared.

• I suspect someone is using my key synchronization. Where can I find a list of all my devices registered on sync?

  I store my sync on my USB key, and I suspect that someone else could find it. Where can I find a list of all the devices I have currently recorded on sync?

  Hello

  You can find this information in "Tabs on other computers" in the menu of your history.

• Wireless key does not work on my Satellite 1410

  I have the system by Satellite 1410-303. I installed a broadcom802.11b/gwlan his works fine, but I can't market using fn + f8 keys. I want to solve the problem.

  Anyone offer a solution?

  There is a list of the supported PnP - ID in the registry under HKLM\Software\Toshiba\Wireless Hotkey.
  Search for the PnP - ID of your wifi in the device manager card and crush one of those that you don't need in the registry.

• I need my wep wireless key how I retrve it?

  I want to install a new dvd blue ray player, and he needs my wep key, seems the notes have disappeared who had my keys on them have gone we know something.

  Hello

  ·         What operating system do you use?

  If you use Windows 7, follow the steps:

  If your computer is connected to the router that you want to find the WEP key, then proceed as follows.

  a. open the network and sharing Center by clicking right on your connection icon in the lower right of the screen.

  b. click the link of the network that you are connected. (Should say "'name of the router here' wireless network connection)

  c. then click 'wireless property.

  d. then click on the Security tab

  e. it should show your security and encryption type. Also, there should be your password as a secret ball. Simply click on the "Show characters" and the WEP key of your should show.

  Also refer to:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-security-key-for-a-wireless-network

  Also, contact the manufacturer for help on this issue.

  Hope this helps

• Wireless radio failed. Where to get repair?

  All-in-one C309a, CC335A

  Bought in November 2010, 1843 printed pages.

  Wireless test report says "the wireless radio does not work.  Contact HP support. »

  So where can I get this repaired and how much will it cost?  After two hours on the Web, I came on this vacuum.  HP Partner Locator on the Web shows no repair facilities within 3000 miles, even though I live in St. Louis.

  HP has kindly offered to replace the printer for me, even if it's 4 months after the warranty period.  They offered me another model, but I chose one handed to nine, as the next model does not have the CD tray.  The framework is quite difficult to get.

  Here is the procedure.  First report of test of the wireless network.  Also print a status report.  You will need later, and there are chances that you might run out of ink while you run a test of HP.

  Pull the plug while the printer is on and plug end about 30-40 seconds.  This will reset the printer.  If this does not work, HP will you reset the printer setup and reset as a new printer.  You can't do it yourself, as it uses a lot of ink, and HP will probably ask you to do it again.  Be nice, but be prepared to spend hours on the phone with them.

  The other choice is to get an adapter wireless ethernet, sometimes referred to as a wireless hub (or a wireless Repeater).  It is a wireless receiver with one or more ethernet out ports.  You're on your own, but it should work for about $25 - $ 60.  I found the part HP (#1150-7931) for $80, but I'm thinking that it might fail once again, while the wireless card can be replaced separately, and it would be usable for other equipment.