How to add routing Configurator or mask change

Similar Questions

• How to add images to slide w / change in the browser

  I need my client to be able to add images, not only to change and replace existing ones. Is this possible? Help, please.

  Thank you!

  Hello

  This is not possible with the Muse/BC in the edition browser at the moment. You can only modify and replace existing ones.

  Kind regards

  Aish

• How to add data to the table changed in sql developer at Apex and vice versa

  Hello

  I had tables of database with sql developer. But now, I have modified the database (new tables added + changed the data in the tables). However, in the Apex, I the old database. Is it possible to get the new Apex database with the data of the table changed so this database in both places (sql and apex developer) is exactly the same... Also the other way around.

  Thank you

  The database schema that contains the tables, is it associated with the workspace even you are searching through the APEX product t development?  Why I'm asking is, if they are the same schema, the tables that you MODIFIED should be appear in the sql for APEX workshop part.  Now reports and forms will NOT see the changes (unless you have actually added or updated definitions for column).

  Can you explain what exactly you were doing the SQL Developer to the tables in your schema?

  Thank you

  Tony Miller
  Los Alamos, NM

• Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  I got a modem Comcast/Xfinity upgrade. Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  Whenever you change the modem or modem/router on a network, AirPort Extreme will be reset to the default settings and then set it up again to work properly with the new modem. For this he would be...

  Turn on AirPort Extreme for a few minutes... If it is not already turned on

  Hold in the reset button on the back of the AirPort Extreme for 7-8 seconds, then release it.

  Allow a minute for the AirPort Extreme restart to a slow, flashing amber light status

  Make sure that an Ethernet cable connects to one of the four LAN <-->Ethernet ports on the modem/router on port WAN "O" on AirPort Extreme

  To start the Setup program, click the WiFi icon at the top of the screen on your Mac and are looking for a list of the new AirPort base station

  Just below that, click directly on the AirPort Extreme and then follow the prompts for configuration "Wizard".

  When you configure AirPort Extreme once again, you can use the same wireless network name and the same password that you used with AirPort Extreme with the 'old' modem, if you wish, or use a new wireless network name and password

• I am trying to disable the option 'comments' on my wireless internet connection. I was told to go to my configuration of the router, but how do the router on my PC?

  In the past, I have activated the 'comments' option while others may have access to my wireless internet, but now I want to turn it off.  I got to go to my router configuration. How do the settings on my router on my PC?  I forgot how I activated the option.  Thank you very much.

  Hello

  You must contact the manufacturer of the router for the best assistance.

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• For a given file, how to add and change file properties on the Details tab, for properties that are not in the properties list?

  Now, I am aware of the modification of the properties of the file is simple in Windows 7 Explorer. Select a file, 'Properties', then tab "Details".  Some are not editable, and that's understandable.  Click on next to any area classified as year, Genre, Publisher, etc. and the apply.  No problems so far.

  Then of course in Explorer, when you right click on a column header, you get several choices of column beyond the usual that is displayed by default; Date, the Type, size, etc.  But, there is an option "More...", which has up to now, MUCH more useful properties to choose from, such as the model project, Department, job statusand so on.

  It's fantastic!

  But when you look into the details of any given file, none of these additional properties even are listed to be edited.  Why offer to view these details, if you don't change them, or add them to different files?  I must be missing something.  I do not need to add my own custom details, this additional list has a choice, that I need; If only I could edit the files to get this info.

  How to add and change these properties to files?  Word, Excel, MP4, AVI, JPG; I would add these properties, so I can set directly in the Solution Explorer, as you would by name or Type.

  Any help would be greatly appreciated!

  My experience is that most of these 'extra fields' no existence not as fields in the directory (folder) itself.  On the contrary, these fields exist in the target file itself. Each file type has its own format and established file except for the types of files that belong to Microsoft, Microsoft cannot control or arbitrarily change the format of a particular file type.

  For example, a ".jpg" file  The format of this file type allows a large number of areas such as comments, Tags, date taken, opening, device manufacturer and so on.  If you go into the properties on a .jpg file, you will see a lot of them and will be able to change.  After changing any of these fields, you will find that the file itself has been changed to contain this information (as can be verified by the parity of the file and to come check upward with a different checksum).  If you display one of these fields in Explorer and 10000 ".jpg" files in this folder, then Explorer must open each of these 10000 files to extract the data in the corresponding fields, you have chosen to display.  May take some time.

  Compare that to the same picture saved to a file ".bmp".  The ".bmp" format has no provisions for any of these fields, so you will not be able to view, save, edit, or sort by them.  If the editable fields are directly related to the type of file that is displayed.

  Microsoft has apparently interviewed a lot of file types and made a compilation of the editable fields in each type of file and the Union of the selected fields in which can be displayed and modified.   That's apparently what you see in the option «More...» ».   So, in summary, the file type determines which fields are available for editing and posting.

  HTH,

  JW

• How to add menuitem in my application that would open configuration bluetooth already on the device?

  Does anyone know how to add a menuitem which would be like a shortcut to the bluetooth configuration screen that is already on the phone?  I know how add menuitems, just trying to figure out how to create one to open an existing page.

  I meant to search the Forum.  I just did an and found this, something to try and maybe I'm wrong!

  http://supportforums.BlackBerry.com/T5/Java-development/launch-Bluetooth-app-to-turn-on-off/m-p/3955...

• How add and configure a new controller AIR-LAP1142N-E-K9 Access Point WLAN-AIR-WLC4402-12-K9

  How add and configure a new controller AIR-LAP1142N-E-K9 Access Point WLAN-AIR-WLC4402-12-K9

  'option 43 hexagonal f104c0a80a05' looks right to me...

  If you're talking about only a few APs, you could hold the AP in the same vlan as the WLC Management Interface and allow discovery by diffusion...    Once he knows the controller you could put in a different subnet and you don't even need option 43.

  But then again, Option 43 I guess is a safe bet to ensuring that the always AP knows an IP address to find out.

• How can I add a custom coding to change the appearance of the "add to cart" and "view cart" paypal

  How can I add a custom coding to change the appearance of the "add to cart" and "view cart" paypal?  I can do these buttons on muse, or should I make them on Illustrator?

  Hello

  Here is some info:

  PayPal API developer - product page of Button Manager - classic

• How to add text and change my PDF file?

  How to add text and change my pdf file

  Hi pilothorse,

  To edit a PDF file, you must use Acrobat. If you do not have Acrobat, you can try it free for 30 days. See www.adobe.com/products/acrobat.html for more information.

• How to add an image to a layer with a mask?

  How to add an image to a layer with a mask?

  I use a flyer template and not good in photoshop.

  I just need to insert a picture in a layer with a mask

  What is the best way to do it?

  Thank you

  Just paste the photo. It turns on a new layer, which is OK, but then you just drag the mask above. Remove the old layer.

• How to add a vector mask?

  Hello:

  I would like to draw a circle with the Ellipse tool, and then add a vector mask

  I would like to duplicate the layer and then select the thumbnail of the mask vector in the layers panel so that when I select the pen tool intersect shape areas is available

  However, I can't seem to get the vector mask it is always grayed out to be available no matter what I try to do.

  I'm trying to add a "glossy" effect to the circle using the pen to draw a shape through it horizontally then upward and around the Summit of and join and closing it so that I can add a white > gradient trans.

  can someone help me please? I read the index of help etc until my face is blue and everything I read will not work.

  Thank you for your time.

  PS. using Ps cs6 and Windows 7

  Any given layer can have a pixel and a photomask vector. When you use one of the form tools, such as the Ellipse tool, you actually create a vector mask on a layer of filling. It was more apparent in earlier versions of Photoshop, but the user interface has been simplified so that the filling and the mask are now an icon in the layers panel. If you cannot add an additional vector mask to this layer, but you can add or subtract to the existing form of vector in the mask to change with the existing tools of vector.

  So, do exactly what you trying to do, but do not forget that the single icon see you in the layers panel after creation of the ellipse IS a vector mask, then you don't need to add anything more.

• How to add the device (eth1) after the command 'neat' calls 'Configure Network'?

  People,
  
  Hello. I want to install 2-node RAC Oracle 11 GR 2 VMPlayer 3 System. The host OS is Windows 7. Oracle Linux 5.6 is the guest operating system. 2 nodes (2 Virtual Machines) are RAC1 and RAC2.
  
  We must create the public IP address and IP private for each virtual computer (RAC! and RAC2). IP addresses public (eth0) connect RAC1 and RAC2 of shared storage. The private IPS (eth1) connect RAC1 and RAC2.
  
  In Oracle Linux 5.6, the command "neat" to the root user calls the configuration of the network (5 tabs) as follows:
  
  Devices | Material | IPsec | DNS | Hosts
  
  In the "Devices" tab, I created the public IP address for RAC1 whose nom_peripherique is etho.
  But I don't know how to add another device 'eth1' in the 'Devices' tab to create the private IP address.
  Thus, the network cannot be implemented.
  
  Can any folk tell me how to add another device (eth1) in the 'Devices' tab after the "neat" command calls "Network Configuration"?

  user8860348 wrote:
  Folk,

  Hello. Thanks much for the reply.

  In the directory "/ etc/sysconfig/network-scripts", there is a file 'ifcfg-eth0"which contain a public IP address.

  But there is no file "ifcfg-eth1" that must be a private IP address.
  What is the reason that there is no device 'eth1' in the 'Devices' tab in the Network Configuration window?
  Do we need to create a file 'ifcfg-eth1 '?
  What should be the content of 'ifcfg-eth1 '?

  Did you create a second NETWORK adapter to the virtual machine?

• How to add music to my library when icloud music is on

  Hello

  I could do something stupid, but I hope someone can explain this to me.

  Before the launch of Apple's music, I have my music the value Sync my iPhone to my music library via a playlist.

  When Apple launched music, I wanted to listen to some of the music in offline mode, so to do this she helped iCloud music library.

  The question I have is that I now want to change some of the music I have sync'd through the reading list which seems to be more accessible. The big problem is that music, I would add my library is not available on Apple music, so I can't just enter it on the Apple Store.

  I really want to have to rebuild my music library by disabling iCloud music to reset the music library, then re - download all the music I already have offline.

  I do something wrong or is this a quirk of how Apple music is configured, which means that it only what I want?

  Thanks in advance

  Vel

  If you have activated the iCloud music library with Apple music so all your music in iTunes should be available from your iPhone. iCloud music library will scan your library and correspond to all the songs that he can and that will be available on other devices. In addition all securities that are not available in the iTunes Store will be downloaded on Apple servers.

  Once this process is complete, your entire music collection will be available to stream on your iPhone. If you want some music downloaded for listening offline, then you can create a playlist and add all these titles in the playlist "offline." Once the new playlist appears on your iPhone just select "make available offline" and it will download all of the music on the phone.

  More details on works of iCloud music library can be found here. iCloud library: understand the differences between music from Apple and iTunes game - Apple Support