How to allow web access in RV120W

Similar Questions

• How to allow another access to the computer through firewall

  How to enable another computer game acess my fire wall

  Hi Roy,

  If you are using Windows Firewall, the last item in this article shows you how to open a port in the firewall to allow access: http://windows.microsoft.com/en-us/windows7/Firewall-frequently-asked-questions.

  For more information, see the following: http://technet.microsoft.com/en-us/library/cc722062 (WS.10) .aspx.

  It may be more than just the firewall.  You need to allow remote access (in control panel / system / remote settings / Remote Access) and Remote Desktop (same place, but just below).

  Here is an article on the remote desktop for Vista: http://windows.microsoft.com/en-US/windows-vista/Remote-Desktop-Connection-frequently-asked-questions (because I do not know your operating system - you can perform a search Bing for office remotely for your operating system to find something similar).

  I hope this helps.

  Good luck!

• How to allow anonymous access to rights-managed form?

  I have rights enabled form and created a simple strategy which expires the form after a certain date.

  Now the everytime I open the form, I need to provide identification livecycle information.

  

  What I want is to have a form that will be available to the public, but expires after a certain date, after which they must download an updated release of the form.  The public should not see this connection because they will not setup as a user.

  How do I configure this?

  When you create the policy, rather that add you users to a policy, select 'Add the anonymous user' button (see screenshot).  Expiring the document at a certain date, set the period of validity of the document (General settings in the policy).

  If you want to do with the currently protected document, you'll need to 'remove' the policy and again apply whichever is configured for users 'anonymous '.

  

  

  Concerning

  Steve

  P.S. It's posted in the wrong forum (it should be the framework for the management of rights, not of Reader Extensions)

• HP Officejet 6500 a Plus: how to allow access to the ePrint and still block direct wireless printing?

  My web access is on a public network that I can't control.  I feel ePrint installation and it works fine, but I have a number of people who directly print on my printer and wish to block this direct printing for the ePrint which I can control through allowed/blocked senders lists.

  Firstly, is it still possible?

  It it is possible, how do I do to fix this?

  Thank you

  Hi @Unhappy_Camper ,

  Welcome to the HP forum.

  I understand that you want to prevent other people from printing on your 6500 has more.

  Unfortunately what you would do, is not possible.

  Anyone on the network can see and use the printer.

• How to allow only .gov Web sites on Windows XP using the installation of the broad-band

  How to allow websites .gov only on Windows XP. Use BSNL broadband. Made of internet sharing in LAN.

  Concerning

  Maton

  Hi Matt,

  This forum is for MSE who cannot restrict access of Web site you want.

  One of the possible methods that comes to mind uses the Parental http://www.windows-help-central.com/parental-controls-in-windows-xp.html may control with Windows Live Family Safety http://explore.live.com/windows-live-family-safety?os=other (according to the version of XP and whether or not you have a workgroup or domain LAN).  When you set up, allow *.gov, but reject all other types you can imagine (I don't think there is a way to allow only .gov, but you can exclude most if not all of the other busiest - check domain name registrars to get a list of options).  If you use a domain, way to go would be with a custom domain group policy to restrict access on all of the network (except perhaps the server or individuals of special category in Active Directory if you want).

  If that is not the case, and I think it might, please repost your question in the following forum to get the expert assistance you need: http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking?page=1&tab=all.

  I hope this helps.

  Good luck!

• How can I find a road to my old email 'Outlook Web Access' runner

  I've been using the messaging system of the University of Ohio (Outlook Web Access) and it was easy for me.
  I am now provided with TV, telephone and computer on the cable.

  Yesterday, I saw the words "Road Runner" on my screen and clicked on it to see what it was.
  Now, I've lost my email old system and must watch announcements and news, and worst of all, my email listed in very small characters that I can barely read.

  How reverse and go back to my easy access to Outlook?

  I guess that RoadRunner is your ISP, and you redirected to the RR pages for some reason any.

  If you use a bookmark try to access OAW through its login page.

  If printing of web pages is too small then make sure you are not zoomed out on these pages.

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• How to allow access to all users of the connection on my computer?

  How to allow access to all users of the connection on my computer?

  Your question is hard to understand.  I interpret as:

  "How to allow all the users on my computer to access some files or folders?

  The answer depends somewhat on the question of whether you have XP Pro or XP Home, but a general answer is found the following article.

  "How to use file sharing Simple to share files in Windows XP"
    <>http://support.Microsoft.com/kb/304040 >

  Click on "level 3: files in shared documents available to local users"

  HTH,
  JW

• How to solve the local origin: / / is not allowed by Access-Control-Allow-Origin.

  I try to use the $.ajax call other service, this method of correct running on iphone, android, but failed on Simulator bb10,.

  get the message from the web Inspector:

  XMLHttpRequest does not load http://www.example.com/getData

  Place of origin: / / is not allowed by Access-Control-Allow-Origin.

  I added in the config.xml file.

  I try to google for the solution, but I failed, can anyone help me, thank you.

  I've solved, I think that the blackberry document must provide detailed on webworks settings.

  This losing my several times.

• How to allow access to a local area network behind the cisco vpn client

  Hi, my question is about how to allow access to a local area network behind the cisco vpn client

  With the help of:

  • Cisco 5500 Series Adaptive Security Appliance (ASA) that is running version 8.2 software
  • Cisco VPN Client version 5.0 software

  Cisco VPN client allows to inject a local routes in the routing table Cisco ASA?

  Thank you.

  Hi Vladimir,.

  Unfortunately this is not a supported feature if you connect through the VPN Client. With VPN Client, that the VPN Client can access the VPN Client LAN host/local machine, not host from the local network to business as customer VPN is not designed for access from the local company network, but to the local corporate network.

  If you want to access from your local business to your LAN network, you need to configure LAN-to-LAN tunnel.

• How to configure windows 7 pc to allow full access to the xp pc.

  original title: how to configure windows 7 pc to allow full access to the xp pc. Both PCs have been configured for full sharing

  How to configure windows 7 pc to allow full access to the xp pc. Both PCs have been configured for full sharing. Windows 7 pc has full access to the xp pc. However, on xp pc, all readers of windows FP7 can be seen, but access not authorized expect public folders.

  Any suggestions welcome

  Search in the sharing folder entries in a procedure step by step for the creation of a network of Ethernet cable of two computers between Windows 7 and Windows XP with ICS

  You will be able to share files in C:\Users but Windows 7 has special protection on the folder root the C:\ drive and others.

• Sometimes when I access the net via firefox, a new tab opens and opens on a Web site. How can I block access to this Web site?

  When I access the net with firefox, a new tab opens on a specific page. How can I block access to this site or stop firefox from loading? Here is the site in question:
  http://AdultFriendFinder.com/go/g1110961-PMO
  not once have I ever accessed this site and it doesn't show up in the browser history

  This has happened

  A few times a week

  is since I started using firefox

  Make a check of malware with a few programs to scan for malware.
  You must use all of the programs, because each detect different malware.
  Make sure that you update each program to get the latest version of the database.

  http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  http://www.superantispyware.com/ - SuperAntispyware
  http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
  http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  ..........
  See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked

• How can I provide access to pictures, I have a license to the man who built my Web site?

  How can I provide access to photos that I bought to the man who built my company website? I simply give him access to my Adobe account? Also, I don't want free access to photos. What will happen if it downloads on his computer? This is all new to me... Thank you.

  Add them to a library then go to http://assets.adobe.com and share your library. Use the button to work. Or you can just download it yourself and send them to her.

  You don't have to give your own Adobe ID. Just use other people's electronic mail address. You'll never lose access to the photos. They will always be at your disposal in your history of license to redownload whenever you need.

• vCenter web access do not allow me to generate shortcuts

  Hey guys,.

  This is the first time I've been watching this.
  I connect to vCenter Web Access with my credentials (I have admin rights in vcenter) and I get to see my inventory.
  Returns the right info as expected for all objects (data centers, files) but when I click on a virtual machine on the right side is empty.
  I expected to see the Summary tab, because that's where I generate my shortcuts but there nothing at all.

  Any ideas?

  
  See you soon

  Hello

  You try to access the vCenter through a vSphere client installed on the vCenter server or PC remotely?

  This problem happens on the summary only tab?

  Kind regards

• How to create a local user for ESX Web Access?

  Hi, in my last post,

  http://communities.VMware.com/message/1444920#1444920 I enabled web access.

  But what is the best practice to create a temporary user directly on the esx to provide access of computer virtual via web access console?

  Thank you.

  You can have a configuration of the user for the local access to ESX and it will not be seen by vCenter.  ESX is not its userbase with vCenter synx.

  If you have vCenter, simply create a folder in your virtual machines and the view models, move the virtual machine in question in the newly created folder and add the AD account with permissions to this folder and assign a role.  You can then simply access the vCenter and all they will see, if the user does not have permissions anywhere elsewhere in your vCenter hierarchy, is the single guest.

  But, if you do not have vCenter you will need to create a local account on the ESX host

  Hope it makes sense.

• Verification email of site blackBerry Smartphones that use Outlook Web Access Lite

  I just got a Blackberry 8330 and the need to use it for the electronic control of my company's e-mail server.

  It turns out that this server uses Outlook Web Access lite. I am currently not able to check the mail that I am

  get errors saying that the browser must accept cookies. Also something about scripting.

  Does anyone know how to get around this problem?

  I don't want to 'integrate' this email account and I get messages pushed to Blackberry - only to be able to

  access the site of the email and check email.

  Solutions please!

  Hi and welcome to the Forums!

  It actually maybe not a cookie issue... since I access OWA as you wish (I integrate via BIS... very slippery!), I can only guess.

  In the browser, click on the BBKey and select Options. There is a ton of different options, including one that allows your browser to BB identify on a website in IE, FF or BB... being the default, of course, BB. If you change IE, you might have more luck. This setting is located in the screen of Configuration of the browser and is usually called the browser Identification.

  There are also many other settings that may be useful... basically, you need to tinker with them until you find a combination that works for your particular situation. But I would try the browser ID/emulation first.

  See you soon!