HP Officejet 6500 a Plus: how to allow access to the ePrint and still block direct wireless printing?

Similar Questions

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• How to add text on the video and still images?

  CS 5.5. I want to add text credits at the end of a clip on top a fixed image, but I don't know how to do it. I don't want to do some exploring, text just above the .jpg image. I tried to use the title of"to do, but for some reason any title using part of the video for do not return, it comes with a yellow instead of red like the rest of the video in the timeline. I searched the FAQ and google for help and all that shows is how to make a title using text.

  Thank you

  For some info on the red, yellow and green bars go look here http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html

• How do I get my apps to allow access to the camera and photi

  • MY iPhone 5s was software updated this morning and found out my snapchat and Kijiji, do not have access to my camera or the photos
  • I have reset my attribution and privacy, it's still doesn't work do not
  • AAND also when I go into settings > privacy > camera it says ' apps that have requested access to the camera will appear here "(mais là pas appers ci-dessous) it's the same for photos under the heading Privacy"»
  • someone also suggested in general > restrictions but do not know my password so I can't try it

  Does anyone have any other suggestions

  Hello

  Delete the apps that you have problems with then download again.

  Open the app, then it should be on the access to the camera.

  See you soon

  Brian

• How to allow access to the external network of VPN through PPTP

  Hi guys, this is probably a simple one, but I have not much firewall experience so any help is appreciated.

  We would like to have the opportunity to connect to a private network virtual to a company, we have recently acquired.  When you connect to it directly from the Internet (not), it is accessible.  However, behind our firewall, there is no access.  We use Cisco ASA 8.2 (2)

  Currently, we have an entry as follows:

  PPTP tcp service object-group

  EQ pptp Port object

  inside_access_in list extended access permit tcp any host object_name object-group PPTP

  Please can anyone advise what else are required to complete what I'm not sure of what else is needed?  Basically, we want any device within our network in order to access the VPN through PPTP.

  Your help is appreciated

  Kind regards

  Hi Angelo,.

  It should work when you make a pptp permitted and inspected. But will also Appreciate ACL with your firewall to the PPTP server.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080094a5a.shtml#pptpwith

  The above documents helps you better understand.

  Please assess whether the information provided is useful.

  By

  Knockaert

• HP Officejet 6500 a Plus won't copy. It allows to print and scan but copies are empty. Windows XP

  I have a HP Officejet 6500 has more.  It allows to print and scan but the copies are to come in white.

  Hey, here's a link for y our question, it says empty and white scans copies, but it breaks down in their own separate headings, here is the link: http://support.hp.com/us-en/document/c03111687

  If that does not help the problem, a sequel to the above listed link I would do a hard rest is: while the printer is on, pull on the power cord to the printer and the wall. After 30 seconds reconnect power to the wall and printer. This will trigger a 'dirty power upwards' and restoring the printer to a State well known (if possible). No user settings are lost with a "hard reset." I'm pulling directly the instructions for this process of a hardware instruction guide. I'm sticking to it would have shown here Word for Word. I hope this helps

• OfficeJet 6500 a Plus: clear the call history

  I would like to know how celar to the call history please. I deleted the history of fax and restored factory settings (settings > tools >) but on start-up again calls on any phone numbers history is still there.

  Hey @Appt,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the story on your Officejet 6500 a Plus e-All-in-One of compensation. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see in a message private shortly.

  Please let me know if that clears the history. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet 6500 a Plus: printer shows as a fax machine

  I unplugged my printer about a month ago and when I rebooted and tried to add a printer, it shows just like a fax machine. I've tried different help topics, nothing seems to work.

  Hi @Swissmizz,

  Welcome to the Forums of HP Support!

  I see that your printer of HP Officejet 6500 a more re-won't add to the Mac as a printer, as a fax machine. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing. HP doesn't have the full functionality of software and drivers for Mac OS X 10.10. Apple has a software update for the HP Officejet 6500 E710n driver, but it is only the print driver.

  That being said. I recommend reset us the printing system and add new printer using the driver update from Apple.

  Reset the printing system:

  To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do not add your HP Officejet in now.

  Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Once the reset complete, restart the Mac.

  Uninstall the drivers and the software (if installed):

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down list 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps under two method to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Add device:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list. Do not add the AirPrint driver.

  7. try to print again.

• No connection after moving: OfficeJet 6500 a Plus

  I moved houses and now unable to connect to the printer.  I worked with wireless.  The cable only I can see that needs to be attached is the power to the printer.

  1. the additional cords needed to reset my printer?

  2. do I need to reset the IP address of my new location?  How can I do?

  3. are there tricks to get my updated printer in place at my new address

  It is an OfficeJet 6500 a Plus all-in-One.  Thank you.

  Hello

  He may think that it is talking with a new router now.  Please try the following instructions to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.

• HP printer Officejet 6500 a Plus

  I bought a new printer and want to get rid of my old printer (HP Officejet 6500 a Plus).  My question is: is there any reader of memory in the printer I'm tossing or is it just just to throw it away?

  Hello
  
  Thank you for using the HP forum.

  You can restore the default printer.

  Theres no hard drive on the PC but if you don't save any number of fax on this subject, you may want to delete that.

  Usually, we cut the strip of coding, break the glass of the scanner and cut other visible wires before disposing of it so that the printer is "beyond economic repair" for anyone who can pick it up.

  Hope that helps.

• HP Officejet 6500 has plus: HP Officejet 6500 a more impossible to connect to the server

  My printer can detect my wireless network, but does not connect to it. Problem started with my MAC a few months ago, but he persists even with my new HP laptop.

  I thought I could have network problems, so upgrade my router (Linkys at Linkys))... still problem. Comcast upgraded my router (Linkys multifunction ARRIS) again and the problem persists.

  I tried cycling power offshore for the router and the printer.

  Even my scanner picks up signals from the printer. I don't know where's the disconnect?

  Help, please

  @mikkiglanvill

  Printer:

  HP Officejet 6500 a Plus e-All-in-One - E710n

  A few ideas

  If you have not done for awhile, you may download and install a new copy of the software full functionality.  Reference: install the full features software - printer

  If the printer is located where you can do so, you could try a wired connection to the router.

  You could try the printer of the assign a static IP address.

  Make sure that there is at least 1 meter / 3 feet between the printer and all wireless devices you want to connect.  Too much is as bad as too far away...

  Paw through all ideas / suggestions / information in the exceptional User Guide of this printer - network setup Section starting on Page 222.

  Try to use as not only a static IP address, but also a hard to connect to your ISP DNS information.

  Mount the power wireless on your receiving devices (PC)

  Help:

  Printer keeps no connection Wi - Fi

  Set the SSID printer

  Parameters to improve wireless connectivity

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• I'm looking for on what toner is empty on my printer HP OfficeJet 6500 a plus?

  I'm looking for on what toner is empty on my printer HP OfficeJet 6500 a plus?

  Hello

  Check with HP support, their documentation online and ask in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Officejet 6500 a Plus e-All-in-One - E710n ' slow printing - cannot scan.

  Windows 7 64

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Wireless connection

  Until recently, I noticed that it takes a good 45-60 seconds to print. From the moment that I hit print say at the start of the printing printer. Real bummer, but today I tried to scan and got an error "Scanner communication cannot be established... "I've uninstalled all the drivers and the printer and reinstalled same thing any suggestions I have to be able to scan.

  Hey alsmith1964,

  It seems that the network communication between the PC and the printer has become lost or locked up.  The first step, I would suggest in this case is to perform a cycle of power to all devices in the network circuit.

  Follow these steps to reset your printer HP, your router and your computer.

  1. To turn it off, press the power button on the HP printer.
  2. Unplug the power cord at the back of the HP printer.
  3. Unplug the power cord from the wireless router.
  4. Turn off the computer.
  5. Wait 30 seconds.
  6. Reconnect the power cable to the wireless router.
  7. Wait 30 seconds, or until the router is completely ready.
  8. Turn the computer on.
  9. Wait for the computer to recharge.
  10. Reconnect the power cord to the back of the HP printer.
  11. Turn on the printer.

  I would like to know if it is able to get the question to be resolved,

  Jason

• OfficeJet 6500 a Plus: Paper Jam on Officejet 6500 has more ADF

  I analysis an article of newspaper & stuck to the ADF.  I tried to shoot, but half of it is still in the tray and I can't find a way to move it.

  Hello @MaryRuth144,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of paper jam that you are having with the document feeder on your HP Officejet 6500 a Plus e-All-in-One Printer today. I understand that a newspaper article that you scanned is still stuck in the paper feed mechanism. At this point, I would like you to follow the steps below to remove the paper without any damage to the machine.

  1 remove all paper drop the document feeder

  2. lift the document feeder cover

  

  3. pull any paper stuck on the reels

  4. close the document feeder cover

  5. lift the scanner cover

  

  6. lift the document feeder mechanism

  

  7. checked for any paper stuck in the paper feed mechanism. Check both entry and exit of the feeder for any paper stuck or torn.

  

  8 lower the document feeder mechanism

  9. close document feeder cover and then close the scanner cover.

  10. If it is not "Paper jam" message appears on your printer, please try a blank copy of the 1 page to check if your document feeder always advance the paper correctly.

  -Source

  To avoid paper jams in the future:

  • Support up to 35 sheets in the tray
  • Paper weight (16 to 20 pounds bond paper) from 60 to 75 g/m is supported
  • Supported paper formats: letter, letter without borders, Legal, A4, custom size of scale in 5 to 8.5 and 9.5 to 12 in long
  • Don't use paper that has clips or Staples
  • Don't use paper that is folded, torn, dusty, damp, wrinkled, curpled or paper not based dish
  • Don't use paper that is too thin, too thick or too bright

  Please reply to this message with the result of your troubleshooting. Good luck!