How to assign a static public IP to Server 2008R2 through a SOHO router

Similar Questions

• How to assign a static IP (external) to a virtual computer when provisionng by vCAC

  Hi all

  
  I'm trying to figure out how to assign a static IP address at a request of vCAC via vCO prior to cloning. Without a static IP address assigned, cloning ends well and gets a random IP address... but I want the virtual machine to use a specific IP address.

  I use the pack of extensibility (not dynamic Ops Designer).

  
  Is it possible to do? Any ideas would be appreciated.

  
  Thank you.

  Are you planning on using network profiles for a pool of static IP addresses? If this is not the case, will provide you the IP address at the time of the request? For static IP address assignment, put in the property custom 'VirtualMachine.Network0.Address' and associated custom properties (see page 251 of the Guide) and if you have a comment specified in your plan customization, it will use this information to provide the IP address.

• Spectrum of HP x 360: how to assign the static IP address

  Seeks to use my Wi - Fi business, I need to use a static IP address, as well as the WPA/WPA2 PSK security password.  I can't find where to enter the static IP address.  I think I may also need to modify the DNS 1 address and gateway.  Can tell me where to access these settings in any case? Thank you!

  My Wi - Fi works perfectly at home, which does not use a static IP address.  Also, the laptop shows the work of network WiFi SSID and tries to connect to it, but can't since I did put in the settings above.

  @BlueCyclone

  Take a look at the following: Static WiFi IP address

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• How to take an incremental backup in windows server 2008R2 64 bit

  Dear helpdesk,

  I am unable to take an incremental backup in windows server 2008r2. Whenever he takes the full backup.

  Help, please.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• ezvpn server. assign a static ip to specified customers

  Hello

  I have configured the router cisco easy vpn server.

  everything works very well.

  but I can't find how to assign a static ip to the specified vpn client. (provided by MAC or name)

  I tried to create the dhcp binding:

  IP dhcp pool vpnclient

  the host 192.168.111.50 255.255.255.0

  address material 0005.9a3c.00a9

  vpnclient customer name

  but this does not affect the ezvpn client ip address...

  Hey good thing Andrii, noted

  You must include the IP Pool of Group A on the Split tunneling ACL for Group B and vice versa.

  I hope that makes sense

  If it is not made me know

  Raga

• How to assign variables itemrender in a global public variable of my application.

  
  Hi friends,

  How to assign values to render internal elements in a global public variable. You can see example below.

  List an itemrender, the itemrender breast I use the data grid. The dataGrid control have itemrender.now I tried the values to assign public variable in my application data grid itemrender, but is it from the error... How can I slove u this problem Any One can help me.

  Example:

  public var myData:arrayCollection;

  < mx:List variableRowHeight = "true" dataChange = "validateNow ()" width = "900" id = "Lst_userlist" verticalScrollPolicy = "off" horizontalScrollPolicy = "off" "
  buttonMode = "true" >
  
  < mx:itemRenderer >
  
  < fx:Component >
  
  < mx:VBox paddingTop = "-5" horizontalScrollPolicy = "off" verticalScrollPolicy = "off" >
  
  < fx:Script >
  <! [CDATA]
  
  override public function set data(value:Object):void
  {
  ------

  -----
  }
  
  []] >
  
  < / fx:Script >
  
  < mx:VBox id = "vbox_grid" horizontalScrollPolicy = "off" verticalScrollPolicy = "off" width = paddingLeft '890' = "10" paddingTop = "5".

  backgroundColor = "#317152" color = "#FFFFFF" >
  
  < mx:DataGrid visible = "false" includeInLayout = "false" height = "100%" id = "membershipGrid" alternatingItemColors = "[#DCDCDC, F8F8FF #]".

  "5" paddingLeft = horizontalScrollPolicy = "off" color = 'black '.
  horizontalGridLines = "false" verticalScrollPolicy = 'auto' verticalGridLines = "false" rowHeight = "25".
  borderSkin = "{null}" showHeaders = 'true' borderVisible = "false" dataProvider = "{data.dataCollection}" width = "900" > "
  
  < mx:columns >
  
  < mx:DataGridColumn width = "180" headerText = "Name" minWidth = "150" sortable = "true" wordWrap = "true" >
  < mx:itemRenderer >
  < fx:Component >
  
  < mx:HBox horizontalScrollPolicy = "off" >
  
  < fx:Script >
  <! [CDATA]
  
  override public function set data(value:Object):void
  {
  -----

  -----

  }
  
  function Click_Name (): void
  {
  

  outerDocument.myData = data;  Here the error came

  }
  
  []] >
  
  < / fx:Script >
  < mx:Image id = "fileimg" buttonMode = "true" toolTip = "This is organization at the home page of the user" / >
  < s:Label id = "lbl_Gridcloumn_name" width = "200" buttonMode = "true" textDecoration = "underline" click = "Click_Name ()" / > "
  
  < / mx:HBox >
  < / fx:Component >
  
  < / mx:itemRenderer >
  < / mx:DataGridColumn >

  < / cloumn >

  < / datagrid >

  Error:

  MyData property possibly access not defined through a reference with static type com.istmanagement.views:ProgramAcessRights_ComponentInnerClass3.

  Thank you

  Mamoudou R.

  Have you tried outerDocument.outerDocument.myData?

• How to assign static ip to 1131AG Lightweight Access Point before register you for the controller

  Hello

  I have controller Wireless LAN that is installed at the head office, we have allowed H-harvest so that the remote access can be registered with headquarters controller.

  Now, I have an access point to one of the remote site now, I want to give a static IP address to the AP through that console too, before saving the controller.

  I have the console with sub name:

  ...... MAC address... >

  But if I type any command to assign the IP address, it displays the error "command disabled."

  I join calrification details.

  I know that I can connect to this access point to the headquarters LAN and registered with WLC and then via WLC GUI, I can assign static IP address, but I need solution to assign a static until you save to WLC IP not.

  I will be obliged if I get a solution

  Hi Vinod,

  problem solved?

  Concerning

  Surendra

  Please do not forget to note the useful messages...

• How can I assign a static ip for each virtual machine

  I have the NIC 2 and 3 vm on my vm server.

  I did find documentation how to assign an ip for each virtual computer fix.

  pleas help me... but probably easy...

  Assuming you have the management and the virtual machines on the same network, attach both rising/NIC bindings to the vSwitch0, configure the management network and tie each VM to the port "VM Network" group. As DSTAVERT mentioned, the IP of the virtual machine configuration is done in the VM themselves, as if they were physical systems.

  sample:

  

  If you have different subnets for the management and the virtual machines, you must either create multiple vSwitches or work with the VLAN.

  André

• How to assign an IP address permanently?

  I have a netbook Aspire One, 2 GB of ram, Windows 10, but I can't assign a static for OpenDNS dns address because it keeps the switch back to the old one. I just want to change the IP address to a static, but how? Thank you.

  You can use a permanent IP unless you have been instructed by your ISP. Are paying you extra for a static IP address?

  If so,.

  https://support.OpenDNS.com/entries/25213189-dynamic-IP-General-information-for-OpenDNS-usage

• How to get a static Image location (Lon &amp; Lat)

  Hi, I have a location (long & Lat),

  How to get a static Image of these data?

  Thank you

  JAM373 blackberry jam europe reading

  and

  http://supportforums.BlackBerry.com/T5/native-development/crush-in-BB-Cascades-imageView-SetImage/m-...

  Found the solution using MapImageGenerator

  I am applying like this

  on .qml:

  function getImage() {
     mapImage.getImageMap(lat, lon, screenWidth);
  }
  
  attachedObjects: [
     StaticMapImage {
       id: mapImage
       onGetProperties: {
         staticMapImage.image = aPropertyMap.img;
       }
    }
  ]
  
  ImageView {
     id: staticMapImage
     preferredWidth: screenWidth
     preferredHeight: 300
  }
  

  on StaticMapImage.cpp:

  StaticMapImage::StaticMapImage(QObject *parent):
      QObject(parent)
      {
  
      }
  
  void StaticMapImage::getImageMap(const double &aLatitude, const double &aLongitude, int width)
      {
      ViewProperties mapProperties;
      mapProperties.setLatitude(aLatitude);
      mapProperties.setLongitude(aLongitude);
      QRect windowRect(0,0, width, 300);
      mapProperties.setWindow(windowRect);
  //  mapProperties.setAltitude(500);
  
      iMapImageGenerator = new MapImageGenerator(mapProperties);
      bool result = connect(iMapImageGenerator,
              SIGNAL(finished(bb::cascades::maps::MapImageGenerator *)),
              this, SLOT(imageFinished(bb::cascades::maps::MapImageGenerator *)));
      Q_ASSERT(result);
      Q_UNUSED(result);
  
      iMapImageGenerator->start();
      }
  
  void StaticMapImage::imageFinished(bb::cascades::maps::MapImageGenerator *aMapImageGenerator)
      {
      bb::cascades::Image img(aMapImageGenerator->imageData());
  
      QDeclarativePropertyMap* propertyMap = new QDeclarativePropertyMap;
      propertyMap->insert("img",  QVariant(QVariant::fromValue(img)));
      setProperties(propertyMap);
  
  //  delete iMapImageGenerator;
      }
  
  QDeclarativePropertyMap *StaticMapImage::properties()
      {
      return iPropertyMap;
      }
  
  void StaticMapImage::setProperties(QDeclarativePropertyMap *aPropertyMap)
      {
      iPropertyMap = aPropertyMap;
      emit getProperties(iPropertyMap);
      }
  

  on StaticMapImage.hpp:

  class StaticMapImage: public QObject
  {
      Q_OBJECT
      Q_PROPERTY(QDeclarativePropertyMap *properties READ properties WRITE setProperties NOTIFY getProperties)
  public:
      StaticMapImage(QObject *parent = 0);
      Q_INVOKABLE void getImageMap(const double &aLatitude, const double &aLongitude, int width);
  
  private slots:
      void imageFinished(bb::cascades::maps::MapImageGenerator *aMapImageGenerator);
  
  public slots:
      QDeclarativePropertyMap *properties();
      void setProperties(QDeclarativePropertyMap *aPropertyMap);
  
  signals:
      void getProperties(QObject *aPropertyMap);
  
  private:
      MapImageGenerator *iMapImageGenerator;
      QDeclarativePropertyMap *iPropertyMap;
  };
  

  Thank you

• How to set address static IP for cisco APS to the controller via command line

  Hello

  in our project it 208 APS registered in a WISN-1 controller

  How do I assign a static ip address to this Aps via command line in a controller 4404

  Thanks to the Internet, it takes more time to assign the static ip address

  You don't mention what version of the code, you are on but on 7.0:

  ap static IP config activate

  You can also add

  ap static IP config add domain

  ap static IP config add nameserver

• How to assign values to the nested table and passes as a parameter for the procedure?

  How to assign values to the nested table and passes as a parameter for the procedure?
  
  Here are the object and its type
  
  create or replace type test_object1 as an object
  (
  val1 varchar2 (50).
  val2 varchar2 (50).
  VARCHAR2 (50) val3
  );
  
  
  create or replace type test_type1 is table of the test_object1;
  
  
  create or replace type test_object2 as an object
  (
  val1 varchar2 (50).
  val2 varchar2 (50).
  VARCHAR2 (50) val3
  );
  
  
  create or replace type test_type2 is table of the test_object2;
  
  
  GRANT ALL ON test_object1 to PUBLIC;
  
  
  GRANT ALL ON test_type1 to PUBLIC;
  
  
  GRANT ALL ON test_object2 to PUBLIC;
  
  
  GRANT ALL ON test_type2 to PUBLIC;
  
  Here is the table object type:
  
  create the table test_object_tpe
  (
  sl_num NUMBER,
  Description VARCHAR2 (100),
  main_val1 test_type1,
  main_val2 test_type2
  )
  
  
  NESTED TABLE main_val1 STORE AS tot1
  NESTED TABLE main_val2 STORE AS earlier2;
  
  
  -----------------------------------------------------------------------------------------------------------
  
  Here is the procedure that inserts values into the nested table:
  
  PROCEDURE INSERT_TEST_DATA (sl_num in NUMBER,
  Description in VARCHAR2,
  p_main_val1 IN test_type1,
  p_main_val2 IN test_type2
  )
  IS
  BEGIN
  
  FOR rec in p_main_val1.first... p_main_val1. Last
  LOOP
  
  INSERT INTO xxdl.test_object_tpe
  (
  sl_num,
  Description,
  main_val1,
  main_val2
  )
  VALUES
  (
  sl_num
  description
  test_type1 (test_object1)
  p_main_val1 .val1 (CRE),
  p_main_val1 .val2 (CRE),
  p_main_val1 .val3 (rec)
  )
  )
  test_type2 (test_object2 (p_main_val2 .val1 (CRE),
  p_main_val2 .val2 (CRE),
  p_main_val2 .val3 (rec)
  )
  )
  
  );
  
  END LOOP;
  
  commit;
  
  END INSERT_TEST_DATA;
  
  -------------------------------------------------------------------------------------------
  
  Here are the block anonymoys what values attributed to the object type and pass values in the procedure:
  
  Set serveroutput on;
  
  declare
  
  p_sl_num NUMBER: = 1001;
  p_description VARCHAR2 (50): = 'Test Val1;
  
  inval1 test_type1: = test_type1();
  inval2 test_type2: = test_type2();
  
  Start
  
  
  inval1 (1) .val1: = "testx1";
  inval1 (1) .val2: = "testx2";
  inval1 (1) .val3: = "testx3";
  
  inval2 (1) .val1: = "testy1";
  inval2 (1) .val2: = "testy2";
  inval2 (1) .val3: = "testy3";
  
  CSI_PKG. INSERT_TEST_DATA (sl_num = > p_sl_num,)
  Description = > p_description,
  p_main_val1 = > inval1,
  p_main_val2 = > inval2
  );
  
  end;
  /
  Someone can correct me.
  
  Thank you
  Lavan

  Thanks for posting the DOF and the sample code but whenever you post provide your Oracle version 4-digit (result of SELECT * FROM V$ VERSION).
  >
  How to assign values to the nested table and passes as a parameter for the procedure?
  >
  Well you do almost everything bad that could be hurt.

  Here is the code that works to insert data into your table (the procedure is not even necessary).

  declare
  p_sl_num NUMBER := 1001;
  p_description VARCHAR2(50) := 'Testing Val1';
  inval1 test_type1 := test_type1();
  inval2 test_type2 := test_type2();
  begin
  inval1.extend();
  inval1(1) := test_object1('testx1', 'testx2', 'testx3');
  inval2.extend();
  inval2(1) := test_object2('testy1', 'testy2', 'testy3');
  
  INSERT INTO test_object_tpe
  (
  sl_num,
  description,
  main_val1,
  main_val2
  )
  VALUES
  (p_sl_num, p_description, inval1, inval2);
  commit;
  end;
  /
  

  See example 5-15 making reference to an element of nested Table Chapter 5 using PL/SQL collections and records in the PL/SQL doc
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/Collections.htm#CJABEBEA

  1. you don't even have the procedure because it is a simple INSERTION in the table you can do directly (see my above code)

  inval1(1).val1 := 'testx1';
  

  Since you have not yet created all the elements, there is no element 1 "inval1". You need EXTEND the collection to add an element

  inval1.extend();
  

  And then, there is an empty element, but "inval1" is a container for objects of type 'test_object1' not for scalars as "val1", "val2", and "val3".
  If you can not do

  inval1(1).val1 := 'testx1';
  

  You must create an instance of 'test_object1 '.

  inval1(1) := test_object1('testx1', 'testx2', 'testx3');
  

  And so on for the other collection

  You don't need the procedure (as my code example shows), but once you fill in the variables correctly it will work.

• assign a static IP to guest OS using API

  Hi, I would like to know if there is a method in the VI API to assign a static IP address to a virtual machine? I would also like to be able to assign multiple IP addresses, or to remove, when the virtual machine is running, someone knows how do?

  Thanks in advance.

  You can assign a static ip address for the guest operating system by using the CustomizeVM_Task API or passing CustomizationSpec when cloning a virtual machine using the CloneVM API.

• How scam assignment affects iPad and iPhone

  How scam assignment affects iPad and iPhone

  UH... What? Could you elaborate?

• Satellite L300-2 - How to assign a new email address when registering

  I am writing this message on behalf of the end user of our Toshiba.

  She bought the TOSHIBA Satellite L300-2This and because she didn't have an internet connection at home, I order him to register his new Toshiba by our care.
  I took his laptop and I made a mistake by e-mail. I wrote the wrong email address. How to assign a new email address?

  Best regards

  SAMO Praprotnik

  Hello Samo

  If you have registration problems, please contact Toshiba [email protected]

  You should contact Toshiba in your country. Details are at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp

  Explain what is the problem and I hope someone will help you.

  Post edited by: ADMIN