How to assign a static IP (external) to a virtual computer when provisionng by vCAC

Similar Questions

• How to remove a Trojan allowing horse to the my computer when I did a scan? It's URGENT

  How to remove a Trojan allowing horse to the my computer when I did a scan?  There were 2 Trojan horses that was the same things and 1 was deleted and the other was allowed.  How can I remove it?  They are as follows:

  Trojan horse: JS / Redirected.EV - severe.    One was at 10:07 - deleted; the other was at 10:05 - authorized.  This is urgent if this Trojan horse is in my computer.  No threat in future analyses.  This means - he went at 10:05 and was withdrawn at 10:07.  I do not know, so need help.  Thank you charge.

  Hello

  Preferable to analyze with other programs to ensure that everything has been detected and removed.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How would recreate the pagefile to a Windows 2008 virtual computer running on a host ESX 3i?

  As the subject says, I'm looking for a way to do this.  I inherited the environment of another group and it is very small, but it performs ESX 3i on the two hosts and Vcenter version 2.5 (Infrastructure) is a bit old.  5 of 6 VM are operational, however, the 6th when turned on will not get 40% full, but then it will fail to stating that is not a swap file.  Now, normally it is not a swap file, because they are created or deleted dynamically whenever a virtual computer is powered on one of the hosts.  It's quite strange.

  In the new versions / environments, there seem to be ways to recreate exchange capacity easily, but which doesn't seem to be the case here.  I don't think it's a process lock as the two hosts have restarted to clear HA agent / editions of the resource.  My guess is this has happened has been one of the hosts could not reproduce any more process for some reason any and when the VM problem has been powered down to try to erase some, the problem occurred.  Either that, or there are unreadable sectors in the data store, and perforated in this swap file black...

  I was wondering if anyone had any ideas on how to solve the problem.  Any input would be welcome.

  Thank you!

  All,

  Thanks for the suggestions, but I solved the problem.  What needed to be done was to remove the virtual machine of the inventory and then re-create it as a new virtual machine under the cluster of the same name, same settings and have it use its 2 existing virtual disks.  For some stupid reason, once this is done, he managed to turn on normally and now runs without problem.

  I'm not necessarily happy that this solution because it does not really help understand me what underlying the problem actually was, but I guess I can live with that.  The reason why I have not tried it earlier, is that I was afraid the vmdk would be replaced and I wanted to keep the existing information.  However, someone I work with was certain that they had done before, and that she maintained the pre-existing data, even in this older version, so I finally tried.

  in any case, thanks for the support, and if someone can glean some root causes of the problem based on the solution I have just given, that would be helpful.

• How to assign a static public IP to Server 2008R2 through a SOHO router

  Title pretty much sums up it.

  I tried to assign a public static IP (provided by my ISP) on my server.
  They gave me two IPs, one for the router and the other for my server. The router is assigned without problem, I have assigned the IP address to the server and the subnet, and I get questions of connectivity.
  Any help please?

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Spectrum of HP x 360: how to assign the static IP address

  Seeks to use my Wi - Fi business, I need to use a static IP address, as well as the WPA/WPA2 PSK security password.  I can't find where to enter the static IP address.  I think I may also need to modify the DNS 1 address and gateway.  Can tell me where to access these settings in any case? Thank you!

  My Wi - Fi works perfectly at home, which does not use a static IP address.  Also, the laptop shows the work of network WiFi SSID and tries to connect to it, but can't since I did put in the settings above.

  @BlueCyclone

  Take a look at the following: Static WiFi IP address

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• How to assign a DNS address fixed to a single computer

  I have pored downloaded (and very good!) Linksys guide several times and probably it's me being dense but I can't follow how to go about booking an address fixed for only one computer on my LAN, it will affect others.

  My PSN does not - and nor do I want - to select other that "obtain an IP address automatically" as my WAN connection type.

  On the DHCP tab should then turn off the DHCP server?  If I have to do, should I then assign a fixed address individually for each machine on my local network, not only to the one that I want to have a fixed address, but each of the other institutions?  In this case I would have also made it necessary to allocate a "customer rents time" for each of them and - probably - subsequently to refresh it at regular intervals.

  Is there a simpler and easier way?  Or am I barking the wrong tree anyway?

  Orientation (at the level of "Dummies") would be very appreciated!

  You' you absolutely right!  I confused 8 ' to '0',

  I made the correction.

  Thanks again.

• Can I create a static IP address for my virtual server when my physical network only has a dynamic IP address?

  Hi all!

  About, what I'm trying to do is to create an entire virtual network. I'm working on and studying for my MCSE and wanted to create a virtual server and a few virtual desktops.

  I wanted to put up a few roles on the server which (sort of) requires me to have a static IP address. My question is can I create something like a "static IP address make fun" to do?

  I prefer not to pay the additional sum of $ my ISP for a static IP address if I have to. Other than this virtualization project, I don't need a static IP address.

  Thank you!

  Create and internal network, then NAT so they can talk to the internet.

• How to install view agent 4.0 on a virtual computer

  Hello

  How do we install view agent in a virtual machine, I use vsphere to manage the virtual machine but cannot delete the exe file in the virtual machine

  You must install the agent somehow, maybe make a iso with the agent on and attach it to the virtual machine?

  Linjo

• How can I type of NETWORK adapter in the virtual computer a vCloud?

  I'm trying to write a script that compares the type of NETWORK card in vCloud NIC type in vCenter to work around a bug in vCloud 1.5.  I can get the type of NETWORK adapter in the virtual computer a vCenter by getting the vCenter VM up and running:

  
  

  $vcvm | Get-NetworkAdapter | FT-auto
  Name Type NetworkName MacAddress WakeOnLanEnabled
  ----              ----           ----------- ----------        ----------------
  Network adapter 1 isolated EnhancedVmxnet 00:50:56:01:00:33 True

  
  

  I do not get the same results when you perform an action similar to vCloud:
  $vcdvm | Get-CINetworkAdapter
  
  
  Connected primary index IPAddressAllocation IPAddress ExternalIPAddress VM
  ----- ------- ---------  ------------------- ---------       ----------------- --
  0 true true manual 192.168.10.30 nic1
  
  
  I can get all the other info NIC, such as the network, IP, MAC, etc, but not the type:
  ($vcdvm. ExtensionData.section) [2] .networkconnection
  
  
  Network: isolated
  NeedsCustomization: false
  NetworkConnectionIndex: 0
  IP address: 192.168.10.30
  ExternalIpAddress:
  IsConnected: true
  MACAddress: 00:50:56:01:00:33
  IpAddressAllocationMode: MANUAL
  Get_anyattr:
  VCloudExtension:

  For the moment, I get the type of NIC the vCloud himself database vCloud.  Thanks for any help.

  I use VMware vSphere PowerCLI 5.1 Release 1 build 793510

  I could tell you where to find it, but there is a bug in the API that shows only as PCNET32 anyway (sleep if she could be VMXNET3). Keep doing what you're doing with the database query.

  See you soon,.

  Jake

• How to change the type of adapter on a virtual computer network

  Hello

  I'm testing the network drivers in the virtual machine. My current VM has a 79 c 970 AMD Ethernet controller but I want to test different drivers. so is it possible for me to use another Ethernet controller type on a virtual machine? For example all cards Realtek?

  Currently, I use VMware Workstation 7.

  Thank you

  Zheng Da

  You do not have a lot of choices:

  -Without VMware tools, you will be using the vlance network adapter

  -With VMware tools, by default, you use the VMware AMD Pcnet network adapter

  -You can change inside the VMX configuration file and insert the following line:

  ethernetX.virtualDev = "e1000".

  Where X is the number of your network adapter (0 for the first, 1 for the secod, etc...). This will transform the adapter in an Intel PRO 1000.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• How to restart a virtual computer when it blue screens

  Someone at - it an entries if there is no options in ESX 3.5 that is OS (Windows 2003) blue screened, it will restart it self?

  I know that in HP, there is a function if the OS is not accessible, it will automatically restart. Is there a similar function in ESX? I have some server that just blue screen and uses a lot of resources when he stuck on the blue screen.

  Thanks in advance.

  If you have virtual Center, you can set an alarm on the loss of pulse to restart the virtual machine - VM

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• ezvpn server. assign a static ip to specified customers

  Hello

  I have configured the router cisco easy vpn server.

  everything works very well.

  but I can't find how to assign a static ip to the specified vpn client. (provided by MAC or name)

  I tried to create the dhcp binding:

  IP dhcp pool vpnclient

  the host 192.168.111.50 255.255.255.0

  address material 0005.9a3c.00a9

  vpnclient customer name

  but this does not affect the ezvpn client ip address...

  Hey good thing Andrii, noted

  You must include the IP Pool of Group A on the Split tunneling ACL for Group B and vice versa.

  I hope that makes sense

  If it is not made me know

  Raga

• assign a static IP to guest OS using API

  Hi, I would like to know if there is a method in the VI API to assign a static IP address to a virtual machine? I would also like to be able to assign multiple IP addresses, or to remove, when the virtual machine is running, someone knows how do?

  Thanks in advance.

  You can assign a static ip address for the guest operating system by using the CustomizeVM_Task API or passing CustomizationSpec when cloning a virtual machine using the CloneVM API.

• How to assign static ip to 1131AG Lightweight Access Point before register you for the controller

  Hello

  I have controller Wireless LAN that is installed at the head office, we have allowed H-harvest so that the remote access can be registered with headquarters controller.

  Now, I have an access point to one of the remote site now, I want to give a static IP address to the AP through that console too, before saving the controller.

  I have the console with sub name:

  ...... MAC address... >

  But if I type any command to assign the IP address, it displays the error "command disabled."

  I join calrification details.

  I know that I can connect to this access point to the headquarters LAN and registered with WLC and then via WLC GUI, I can assign static IP address, but I need solution to assign a static until you save to WLC IP not.

  I will be obliged if I get a solution

  Hi Vinod,

  problem solved?

  Concerning

  Surendra

  Please do not forget to note the useful messages...

• How can I assign a static ip for each virtual machine

  I have the NIC 2 and 3 vm on my vm server.

  I did find documentation how to assign an ip for each virtual computer fix.

  pleas help me... but probably easy...

  Assuming you have the management and the virtual machines on the same network, attach both rising/NIC bindings to the vSwitch0, configure the management network and tie each VM to the port "VM Network" group. As DSTAVERT mentioned, the IP of the virtual machine configuration is done in the VM themselves, as if they were physical systems.

  sample:

  

  If you have different subnets for the management and the virtual machines, you must either create multiple vSwitches or work with the VLAN.

  André