How to assign array of Boolean values in LabVIEW?

Similar Questions

• How to pin "Info button" Boolean values of the input data to acquire?

  I am a newbie to LabVIEW. I did this VI referring to this ARTICLE http://digital.ni.com/public.nsf/allkb/CA411647F224787B86256DD000669EFE
  I have problems with taking the values of these pines "Info"... As the functions of 32 buttons, 4 Directions, 8 info axis are wired to 3 Pins?...
  In fact, the goal of my project would be this...
  1 initialize the Joystick
  2. reading axis and Info button
  3 assign characters for each button (a Boolean value) and the axis (-32768 or 32767) as button 1 = Servo1, button 2 = Servo2, Y-Axis(-32768) = MF, Y - Axis (32767) = MB,
  X Axis(-32768) = ML, X-Axis (32767) = Mr... etc...
  4 send the characters to an Xbee Pro connected to the PC with a USB Dongle of Xbee.

  I know it's simple, but such things of convertion and the 'thing' entire component is really confusing... Kindly help me out to the point 3 & 4

  These are clusters.  You can simply use the Ungroup by name in order to leave the values of the components.

• How do I put a Boolean value until some other condition is met to reset?

  In PLC programming, you have sets and resets and a line of logic can put something on IT, until something else it resets and it turns OFF.  I was hoping to do the same thing in LabVIEW and will have a hard time imagine the solution.  Can anyone give me a tip?  I use the crippled basic version so no structure event for me.

  Change of use to a value entered in the wire loop.  Structures of the case allows you to change the value in the loop.    You can also use the function select

  

• How to assign Array/collection of data payload Humantask

  Hi guys,.

  I have an obligation to pass a collection of DBAdapter data for a payload of humantask which also has the collection type.

  but I can't give the collection to the collection.

  If I tried to pass of each column to the variable of the payload, then it will affect only the first data in the collection.

  I have attached the screenshot.

  Thank you

  I addressed this in a recent post: Re: store multiple values in a process data object

  Dan

• How can I create a Boolean oscillator in Labview?

  I have an indicator of booloean I want to go back and forth between 0 and 1 at a constant rate (360 Hz). I would like to clarify, that the indicator to indicate true 360 times per second at equal intervals.

  Something like that?

  

  You try to update an indicator or material is involved?  You aren't going to get a reliable 360Hz toggle with a timing of Windows.  You can easily with the right equipment.

• Can I link an LED on front panel for a specific element in an array of Booleans?

  In LabVIEW 2010, I have a string of LED. I and array of boolean values that contain the values that the LEDs have to indicate.

  What is the best way to connect the LEDs to elements in the array of Booleans?

  Can I link an LED on front panel for a specific element in an array of Booleans?

  How this is done?

  Can someone show the code example?

  
  

• Coordinate the functions of Boolean values by their name

  Hi all

  I have somewhat a challenge I appreciate some help with. I am trying to create a program that synchronizes the function of a group of Boolean values by their names. If the Boolean values are names bool 1_i, I want that they be synchronized such that when for example a bool 1(1)(a) is turned on, then all the other 1_i bool are replaced by the same State.  The value group Boolean bool 1_i will initially be in the same State, but I'm trying to get a program that allows them to work in parallel like this.  I was able to make a table of 16 by 128 to work like this, where every row has represented the bool j_i group where I = j = 128 and 16. Now, I want to have the same function as a stand-alone Boolean values that are not placed in a table the table function palette.  Indeed, I am trying to get an array of Boolean values without creating a Boolean matrix in the traditional sense of the term. It is because I want the position to each boolean standalone to change while maintaining is synchrony with other Boolean values bound to her by name.  Any help on this would be highly appreciated.

  Here are the screenshots of the code that I used the 16 y 128 table

  Sincerely,

  Tax

  
  

• Random 2D array of Boolean

  I'm trying to chance an array of Boolean values, and for reason any I succumbed

  I managed to makine lines at random, but I want the whole range to be random

  added to this I put a number of array of bool.

  Thank you

  Table initialization function will give you the same value for all items. It is documented in help. For example, you cannot use this way. You can simply use two loops so you generate a random number for each element of your 2D array. I do not understand what you say about the number of table of Boolean, or why you using same. If you use the 2-loop approach, all you need to do is decide what you consider a "1". For example, you might say that something greater than 0.5 is a '1 '. This can be done with a single superior? function. Note that this should be done inside the loop.

  An alternative is to use the continuous random function to obtain an array of random numbers that you can remodel in a 2D array. You must decide if the distribution provided by this function is "random".

  You try to create a sort of random communication signal?

• How can I test the Boolean State of the button action?

  Hello
  in as2.0, how can I test the Boolean value if a key has been pressed or not?
  
  I have a function simple im trying to work with like that...
  
  button_btn.onRelease = function (success: Boolean) {}
  If (success) {}
  trace ("we pressed the button value is true");
  }
  else {}
  trace ("value is false");
  }
  };
  
  working with Boolean values in this way is new to me - pointers will do - thanks!
  

  I got it! Here's a quick run down in a table format, hehe

  cry [0]...
  [1] create a Boolean variable
  [2] create your switch case statements correctly //which I have...
  [3] condition your Boolean in case statements
  [4] and then create your button managers
  [5] if the Boolean value is true, then say stream_ns.seek (0)
  [6] happy!

  Thanks again K - have a nice day.

• build an array with 2 values assigned to 1 dimension

  I am wanting to build a 1 d array where the two values are assigned to each dimension.  For example:

  Index 0 would have a 1 and 4 are attributed to him

  Index of 1 would have a 2 and 3 which are entrusted

  Index 2 could make a 0 and 1 that are entrusted to him.

  So can I unbundle the arrayand grab the two les deux valeurs values of index 0, index 1, etc...  I want to put this inside a control of the typedef table.  Is this possible?

  What is the meaning of the index 0 vs 1 against 2?  What is the significance of 1 and 4 for index 0?  2 and 3 for 1 index? ....

  It could certainly be a 2D array.  The line index would be the equivalent of your current 0, 1, 2 indices.  The column index would be the equivalent of the if you want 1 or 4 or 2 vs 3.

  That's all just a matter of how you want to extract data out of the data structure and pass it to your other duties, such as Fieldpoint DAQmx, a façade, a text file...  If it is a 2D array, you can use the index picture, to get a line, column, or a specific line and column item.  If this is a cluster, you can use the index table to get your line, unbundling for the first or the second product off the part of the cluster.

  What data structure is the best one to use really depends on what you're trying to do with the data.  You want two numbers?  Do you want a number and a Boolean value?  You will need to figure out which is best for your application.

• Through the sum of the values in all of the array of Boolean one and zeros

  Hello.

  I have an array of Boolean which I have converted one and zeros. I just want to the sum of all the elements in this table (in other words, giving the number of 1 in the table). I used the feature to add items, but I get a negative value. I checked there were not all values except one and zero (I know it shouldn't be) using max and min. I don't know how a negative value has been calculated - any ideas.

  Thanks in advance

  Before adding elements, convert the table I32 or I64. The output of the primitive add-on is of the same type that the entry and if the entry is an I16, then you cannot have a value greater than 32,767 or value will wrap around (what happened in your case.

• How to manage data in an array of Boolean

  Hello

  I have Boolean values inside the table 1 d

  and I have a numerc control and a text file so that the entry
  number will be compared to the number in the text file
  If the numbers match, the Boolean value of this number goes on
  The issue is that when I enter another number of the first
  Boolean turns off how can I keep the first
  Boolean on...

  It is shown in attachments I walked 5, then the fourth boolean is turned on
  but when I entered the second number '6', the last boolean is turned on
  and the first boolean who was IT turns OFF
  I wana keep the two of them, HOW?

  
  

• How to select cases or an event using an array of Boolean 2D.

  Hello world

  I'm trying to use an array of Boolean 2D to select different events or case. For example, if the variable Boolean 1 and 2 are TRUE, case 1 will be selected. If the Boolean variable 1 is FALSE and 2 is true, case 2 will be selected and so on. I tried to use the Boolean to the number, but I need a way to differentiate between B1 = B2 = FALSE and B1 = B2 = TRUE, FALSE, TRUE. In other words, no two Boolean combinations can lead to the same case, seminar.

  ~ Mario

  You need to remodel your table 2D to 1 d first.

  Now, assuming that you have the items in table 64 less thant, "boolean array to the number" will give you a unique number for each possible combination of bit.

  M_Mario_M wrote:

  I tried to use the Boolean to the number, but I need a way to differentiate between B1 = B2 = FALSE and B1 = B2 = TRUE, FALSE, TRUE.

  As mentioned, each combination will give you a different value. You must simply ensure that you Add unique cases for each number. Add as many cases you want to structure your business. If you do not, several models of trigger default case-sensitive.

  If your problems persist, please contact your code.

• How the Boolean value off the coast in the system bell auto College after 5 seconds?

  How the Boolean value off the coast in the system bell auto College after 5 seconds?... and also the Bell has to ring only the days... Please help me

  basically take the time, times of beginning and end, including the days of the weeks...

• How to assign values to the application points to leave on a table

  Hello

  I have a FORM on a table with two or three elements. How to assign values to the elements of the application with the values in the elements of form, every time the value of the element is entry, change or page is sent?

  I created a dynamic action to the region level with Event - change to run the suite of PL/SQL, I tried with 3 different ways in PL/SQL, as shown below, but it didn't work.

  BEGIN

  : APP_FY: =: P1_FY;

  END;

  BEGIN

  APEX_UTIL. SET_SESSION_STATE ('APP_FY', v ('P1_FY'));

  : APP_FY: =: P1_FY;

  END;

  BEGIN

  APEX_UTIL. SET_SESSION_STATE ('APP_FY', v: P1_FY);

  END;

  Then I created an action dynamic at the ITEM level with change event to run the suite of PL/SQL and tried with PL/SQL, as shown below, but it didn't work.

  I need to assign values to the elements of the request form as these elements of the application will be used in many other pages in the application. How to I get there?

  Thank you.

  If a dynamic action of PL/SQL execution, you must send your list of page elements in the parameter "Elements of Page to submit.

  See the section 'run pl/sql' for this post.

  If the page is submitted, the elements of the page will be automatically set to session state, and you can have a page process make the code you have.