Need help with registry key permissions.

OK, so I downloaded a file .exe on the internet, and now it does not work. I contacted the administrator (the person who did the file) and he said to get procmon. I did and I send a log of the file running for him and we have concluded that some malware or security changed the permissions of the registry key. Not that I'm not able to access it, it's just that my computer is not giving permission to program to run. I found the registry key in regedit, but I do not know how to GIVE key approval to run.

You must click on the button Advanced Options key of registry IExplore and make you the owner of the key. Also note that registry key permissions are notoriously difficult to change.

Tags: Windows

Similar Questions

  • Need help with the key "Reg" {EEC5AD98-8080-425F-922A-DABF3DE3F69A}

    My PC works fine but I am getting a bunch of disks "Unknown" in the Device Manager

    This happened after I amazed the contents of the registry key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {EEC5AD98-8080-425F-922A-DABF3DE3F69A}

    Yes Yes I know, my fault to not backup... I tried a solution to USB MTP device error and I did it wrong.

    Now, all this shows is (default) REG_SZ (value not set)

    The subkeys (0000-0010) are very good, because I don't mess with those. But the main key {EEC5AD98-8080-425F-922A-DABF3DE3F69A} is missing its data.

    I was wondering if someone could post their content for this key?

    I don't want to do a complete reinstallation of the operating system because it seems to me a lot for such a small thing.

    Any help would be greatly appreciated.

    I suspect that you need move on to a more robust way of using Windows by
    (a) restoration of the fastening system facilities. He must show a lot of restore points.
    (b) manually create a Restore Point before of playing with the registry instead of fixing thingslater .

    Here are two methods more to repair the damage:

    • Manually restore the backup of the registry. You will find it here: C:\Windows\System32\config\regback\system. Check the timestamp of the file. If it is old enough, save it immediately elsewhere then post to know how to use. He could get crushed any time!
    • Import the registry file below. No guarantee that it will work and some descriptive fields are in German.

    REGEDIT4
    (deleted)

  • HP 15 - ac043tu: need help with the key feature and WiFi Drivers

    Hi team,

    I try to activate the key feature and WiFi in my new HP 15 - ac043tu laptop.

    I use Windows 7 Ultimate 32 operating system.

    I installed all the drivers available on the site Web of HP (http://support.hp.com/us-en/drivers/selfservice/HP-15-ac000-Notebook-PC-series/7771404/model/8326116... for my product.

    To activate the function key, I installed driver: HP System Event Utility - sp71716, but it doesn't seem to work.

    In Device Manager, network controller shows exclamation as shown below. I tried to install Broadcom and Realtek WLAN drivers, tried to turn on/off, uninstalled/reinstalled drivers referring to other positions, but that did not work.

    I also tried to install HP SoftPaq Download Manager, but it did not help. Tool does not show my product described.

    I went through a similar question posted by other members, but failed to get the solution. This question gave me hard times.

    Appreciate your help in this regard.

    Thank you

    Kishan

    Hello:

    You need these drivers wireless and bluetooth driver 64-bit file should have the 32-bit drivers too.

    Network controller (wireless card):

    FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

    Bluetooth:

    This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

    File name: sp71440.exe

    Unfortunately, I can't help you with the next question.  The system of the event utility would be the only software I can think that would have worked.

    You can try the software HP Quick Launch, but I doubt it will work.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_112835_1

  • Reinstalled Windows after accident, need help with product key

    Original title:

    What sanctimonious group of the so-called 'AID', we have tended to meet with members of the staff of windows.

    I recently had to install all the programs/info after my PC at home.

    Fortunately many of my documents/pictures etc was backed up.

    I have also re install Windows 7. Home premium - which came with the PC when I bought it new.

    Keep the packaging product keys /... for 5 years, OF COURSE NOT!

    Mr. self - rightous "how further I can help you today" Microsoft informs me that EVERYONE KNOWS to keep this info;

    I told him I hope he has ability to view and the brain at my age to remember or be able to do the task himself.

    Of course if I want to 'gift' of Microsoft will be free of charge another $40 to give me another product number.

    Allowing paid once in the fourth, it's a computer at home, I have the drive, it used to work fine, I never use a Word sometimes ~

    I can't be bothered; I'll explain to you just for the little girl that GUYS at microsoft has taken their photo / i.e. screensaver.

    Have anice day :)

    Have you checked the side or the bottom of your box for a laptop at the bottom or inside the battery case the product key.

    J W Stuart: http://www.pagestart.com

  • NEED HELP WITH THE KEY

    HELLO, I'M NEW TO COLDFUSION.

    IS a FUNCTION of the BUTTON AND click ON AURA TIGGER a COLDFUSION FUNCTION (NOT the JAVASCRIPT FUNCTION)? WHAT I'M TRYING TO DO IS TO CREATE A BUTTON AND WHEN THE USER CLICKS ON IT, HE WOULD CALL COLDFUSION FUNCTION. I NEED TO USE THE CF TAG AND CANNOT USE THE JAVASCRIPT FUNCTION. OR is it POSSIBLE to USE CF TAG inside JAVASCRIPT (from WHAT I UNDERSTAND, this IS NOT POSSIBLE)?


    FOR EXAMPLE.

    < name cfinput = "TEST" type = "button" value = "TEST" onClick = "#TEST () #" >

    < cffunction name = "TEST" returntype = 'Cancel' >

    < cfoutput >
    "This is the test."
    < / cfoutput >
    < / cffunction >

    I DO NOT KNOW IF IT IS POSSIBLE. AS, I SAID I'M NEW TO COLDFUSION. ANY HELP WILL BE GREATLY APPRECIATED.

    Thank you

    OnClick, onChange and so on are triggers for Javascript and to get to the client browser. They are not available on the server of Colfusion. That's also what said Ian.

    Therefore, the code onClick = "#test () #", where the left side is Javascript and right Coldfusion, will not call the function by clicking on. ' " However, the code might still work, because Coldfusion could stll run function, if the button is clicked.

    A good example is something like


       



    The most common example of the execution of a Coldfusion function on the click of a button is the submission of a form.  Here is an example:


       


    #test () #.



  • New to AS3 needing help with the key

    OK Im a newb full when it comes to AS3.  Here's what I'm trying to accomplish, I try to make my link button to another page of mine and it loads into the central computer of the original source page.  I found some code to bind the button to a Web site or else my page, but it just opened another window and as previously indicated, I want it to load into the central computer, the button is in the left frame.  Any help would be great, here is the code I use to bind.

    aboutbtn.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler);
    function mouseDownHandler(event:MouseEvent):void {}
    navigateToURL (new URLRequest (". (("/ aboutus.htm '));
    }

    Thanks in advance for the help

    You beat me to it: Yes, it was the parenthesis.

  • Need help with Windows 7 key.

    I have a laptop that I had to change the HARD drive due to a complete failure.  I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3.   Now the installation tells me that this is not a valid key.  I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.

    The old HDD is dead, I tried to connect with a USB key and nothing.   The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead.  I need help with a new key, or at least the one I have to work.  The new drive HARD won't have not all partitions or any attached former windows key.  I can't get past the check of Windows screen.

    Need help please.

    You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.

    How to change Windows 7 product key

    http://www.windowsvalley.com/how-to-change-product-key-in-Windows-7-and-Windows-Vista/

  • I'm suddenly needing help with my browser Firefox (6.0.2)

    Hello
    I'm suddenly needing help with my browser Firefox (6.0.2)

    (OS: I use Windows XP).

    When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

    I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

    This problem started today, September 8, 2011 and has never happened before.

    Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

    I also noticed that just before I "opened" Firefox, I now get a small box indicating:

    [JAVASCRIPT APPLICATION]
    Handl exc in Ev: TypeError: this oRoot.enable is not a function

    This never appeared before - I hope that it offers a clue has what is wrong.

    The browser not be stuck in Mode safe, said by the way.

    Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
    (A friend sends this request in my name from their pc)

    Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

    If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
    In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

    Thanks in advance.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • need help with my screen has been using mouse and the screen is smaller and smaller

    need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see

    Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.

  • Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

    Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

    I don't know why vista windows no longer charge, or when the files and folders disappeared

    How Windows Defender is on this problem?

    Follow these steps to try to solve your problems of boot.

     

     

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • Need help with slui message with the Validation Code: 50

    OT: need help with the message 'victim' slui...

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 50
    Code of Validation caching online: 0xc004c4a2
    Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
    Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
    Windows product ID: 00371-702-8613485-06367
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.150928 - 1507
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, retail channel
    Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
    Installation ID: 022214046070387640229264400212325972472065330163335456
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: X7D3P
    License status: Notification
    Reason for the notification: 0xC004F200 (non-genuine).
    Remaining Windows rearm count: 4
    Trust time: 12/01/2016 11:28:57

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0xC004C4A2
    Beyond: 0 x 0000000000000000
    Event timestamp: 1:11:2016 12:55
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC1425 APIC 060111
    FACP 060111 FACP1425
    HPET 060111 OEMHPET
    MCFG 060111 OEMMCFG
    LASRYVITRAGE OEMB1425 060111
    ASPT 060111 PerfTune
    OEMOSFR OSFR 060111
    SSDT DpgPmm CpuPm

    Hello

    Thanks to everyone who responded to my question.

    Turns out it would not activate the system properties page.

    He did, however, turn on the tool online browser without a

    hitch. Yes, problem solved.

    Jon

  • Need help with a SQL query

    Hello

    I have a data in table (raj_table) with columns (char11) raj_id, raj_number (varchar2 (15)), raj_format (NUMBER), Primary_ID (identity with the values of the primary key column)

    Primary_ID raj_id Raj_number Raj_format

    1                            raj                 rajvend                      1

    2                            raj                 rajvend                      1

    3                            raj                 rajvendor1                 2

    4                            raj                 rajvendor1                 2

    5                            raj                 rajvendor1                 2

    6                            raj                 rajvendor2                 3

    I used under SQL to get query output as below, but has not achieved the required result:

    Select client_id vendor_number, vendor_format, primary_id, row_number() on sl_no (client_id partition, primary_id, vendor_format order of client_id primary_id, vendor_format, vendor_number, vendor_number)

    from raj_table by sl_no asc

    SL_NO raj_id raj_number raj_format primary_id

    1                   1                   raj              rajvendor                 1

    1                   2                  raj              rajvendor                 1

    2                   3                   raj              rajvendor1                2

    2                   4                   raj              rajvendor1                2

    2                   5                  raj               rajvendor1                2

    3                   6                    raj              rajvendor2                3

    I need help with a SQL query to get the result as above without using the group by clause. I want to bring together the combination of separate line of the three columns (raj_id, raj_number, raj_format) and add a unique serial number for each online game (SL_NO column below). So, above there are 3 unique set of (raj_id, raj_number, raj_format) I can get in a group by clause, but I can not add prmiary_id, SL_NO values if I group by clause. I used the analytical functions like row_number() but no luck. Need solution for this.

    with t as)

    Select 'raj' raj_id, 'rajvend' raj_number, 1 raj_format, 1 primary_id Union double all the

    Select option 2, 'raj', 'rajvend', 1 double Union all

    Select 3, 'raj', 'rajvendor1', 2 double Union all

    Select 4, 'raj', 'rajvendor1', 2 double Union all

    Select 5, 'raj', 'rajvendor1', 2 double Union all

    Select 6, 'raj', 'rajvendor2', 3 double

    )

    Select dense_rank() over (order of raj_id, raj_number, raj_format) sl_no,

    t.*

    t

    order by primary_id

    /

    PRIMARY_ID RAJ RAJ_NUMBER RAJ_FORMAT SL_NO
    ---------- ---------- --- ---------- ----------
    1 1 raj rajvend 1
    1 2 raj rajvend 1
    2 3 raj rajvendor1 2
    2 4 raj rajvendor1 2
    2 5 raj rajvendor1 2
    3 6 raj rajvendor2 3

    6 selected lines.

    SQL >

    SY.

  • Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

    Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

    Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

    I was wondering if I saved a layer somewhere and set it as a default value.

    If you group the layers, you will be left with a single layer, thus spreading your concern.

    Suggest that you do the following:

    1. Make sure you have the latest drivers for your printers
    2. Reset the default preferences.

    Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

    Items nearby and let regenerate the file.

  • Making the ear of corn and need help with the ball.

    I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

    http://images.clipartof.com/sweet-corn-on-the-cob-with-husk-royalty-free-vegetable-stock-photo-by-kennygadams-4501068853.jpg

    http://image.shutterstock.com/display_pic_with_logo/660550/660550,1298544740,8/stock-photo-ripe-corn-vector-illustration-on-white-background-71847955.jpg

    http://static5.depositphotos.com/1012047/533/v/950/depositphotos_5336961-Corn-oil.-Stylized-drop-of-oil-and-corn-cob..jpg

    I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

    Tank,

    You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

    Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

    I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

    You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

    Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

    If the above consists of:

    Three roads closed, 8 points each, with ordinary linear degrees

    Three mixtures of open path with three anchor points for each key path

    Six paths closed for shadows / highlights, with 19 points in total

    Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

    Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

    JET

Maybe you are looking for

  • Favorites do not appear in the sidebar save/open dialogs (El Capitan)

    The question The problem is that the sidebar first SAVE / OPEN Windows is missing from the list of favorites. Some people also report they are absent in the side bar of the Finder itself, but in my case, it was not the question. In some cases reboot

  • Is there a another way to resize the browser to share window by dragging the corner?

    My Firefox window is slightly larger than the size of my desktop, so I put the hand on the corner down to resize the window horizontally. Y at - it a shortcut keyboard or another way to do this?

  • Portege series, different on R100 and M100 battery life?

    Hello everyone, I want to buy a new laptop with a high mobile work autonomy. The R100 and M100 are retained, but anyone know if there are differences in the life of the battery. I tested the two NBs to my dealer, but I have no experience of working w

  • Satellite Pro M30 - audio output problem

    Hello Audio output level is lower when I bought this laptop... All of a sudden without any reason. I almost don't hear all the sounds... What is the problem? Software is ok. I reinstall the audio drivers. Once when it was portable sound back to a nor

  • Defender, configfree has stopped working.

    Hello I'm an ole f t, new to computers.i know that I have to take some classes, but... in the meantime, I have a toshiba satellite L355 with vista home premium. I have ccleaner, spybot, and mse. I tried to turn on defender, that came with it, but no