How to assign two URLs for a single image?

Similar Questions

• How to run a script for all the images in a folder?

  How to run a script for all the images in a folder?

  You can assign your script to an action, then use processor by batch or image with the option apply to all subfolders.

• How to connect two databases to a single listener

  Hello
  
  How to connect two databases to a listener.is it is possible or not

  Hello

  Yes, you can record a single listener to respond to several databases. There are several ways to do it and the best way that I would suggest for you is the use of "Network Setup Wizard" or "netca", which is a graphical interface that allows you to meet your requirement. Otherwise, you can hardcode in your listener.ora file located in the 'ORACLE_HOME/network/admin/listener.ora '.

  Example is as follows

  Listener.ora

  SCREW =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = lab01) (PORT = 1521))
  )
  )

  SID_LIST_VIS =
  (SID_LIST =
  -1 database configuration
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB1) *.
  *)*
  -Database Setup 2
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB2). *
  *)*
  )

  Then restart your listener.

  Kind regards
  Asif Muhammad

• How to choose different lines for a single sale order and ship individually

  I have a customer order of lets say 10 broadside of this same article for quantities of 10 each which means 100 quantities.

  When I use the release sales order form it will take the entire order and forward it.

  But I need to take the line and then generate a delivery against it and then to ship and invoice it.

  Need to know how to do this

  You can take different lines for a single sales order and ship individually using FORM of TRANSACTION of DELIVERIES.

  Navigation: OM RESP > order management > shipping > Transactions

• Concepts: how much writing on disk for a single update

  (I use 10.2.0.5 but I think that this applies to any version)
  
  After reading lots of documentation on Oracle I started to think how often Oracle 'written' for a single update statement.
  
  The following is correct?
  
  For an update statement:
  (1) the original data are written in tables UNDO space
  (2) this is protected by a write first to REDO log
  (3) the new data is written to the table space
  (4) this is also protected by an entry first in the redo log
  (5) after that fills in the redo log, it is copied to an archived log
  (6) at the time of the backup that Archives archiving log is also best once more
  
  So for a single update, I count at least six entries of the same data?
  It is probably what makes the robust Oracle.

  user12204556 wrote:
  (I use 10.2.0.5 but I think that this applies to any version)

  After reading lots of documentation on Oracle I started to think how often Oracle 'written' for a single update statement.

  The following is correct?

  For an update statement:
  (1) the original data are written in tables UNDO space

  Yes

  (2) this is protected by a write first to REDO log

  Yes

  (3) the new data is written to the table space

  No, your data still haven't write (immediately) to datafiles (your tablespaces logically). When point of control (when manually to CHANGE the point of VERIFICATION SYSTEM, SWITCH of NEWSPAPER, when the buffer cache is full, STOP IMMEDIATELY in backup database tablespace mode) then your blocks of data will apply to data files.

  (4) this is also protected by an entry first in the redo log

  Yes

  (5) after that fills in the redo log, it is copied to an archived log

  YesIn ARCHIVELOG mode()

  (6) at the time of the backup that Archives archiving log is also best once more

  YES.

  So for a single update, I count at least six entries of the same data?

  These are not same data! This is the mechanism of oracle database. Cancel the information generated immediately and ensure uniformity reading (to restore). Redo information just, contain no information. It comes to redo change agent who used methods of recovery (media and instance) and finally your data updates do not immediately write data by DBWR because files there is reason of performance.

• A7R HOW to ASSIGN DIFFERENT FUNCTIONS FOR FRONT AND REAR DIALS (only not on the position, but completely changed)

  A7R. "Front dial" and "rear dial.  In the menus, the operation of the front and rear dials can be changed between the shutter and aperture.

  BUT THE FUNCTION OF THE DIALS CAN BE CHANGED?  Example: I want the wheel before the shutter speed and the wheel back to be ISO.  Is this possible?  How to assign different functions to dials?

  The function of the dials are by default to the shutter speed and openness, and it is not possible to change. As an alternative, the camera has a fast browsing allowing you to quickly access common parameters and change them using the front dial featured. Please see the ILÇE-7R Help Guide for more information.

  If my post answered your question, please mark it as "accept as a Solution.

• How to use two keyboards for two-player games?

  the use of two keyboards for two-player games?

  Original title: two keyboards

  This is not possible, sorry.

• How to draw two points simultaneously on the image?

  I want to draw two points at the same time on an image. I tried to use IMAQ point overlay and IMAQ meter for point. But when I try to plot two points using one of these two screws, I can't find a single point is plotted. How to solve this problem?

  intensity wrote:
  I want to draw two points at the same time on an image. I tried to use IMAQ point overlay and IMAQ meter for point. But when I try to plot two points using one of these two screws, I can't find a single point is plotted. How to solve this problem? If your image is zoomed out, the size can be to small to allow a good drawing of the point. Otherwise, IMAQ ecaple point works perfectly...

  

• How to set the url for different environments such as DEV, PROD etc using the file resources in SSRS. How we determine the environment?

  While working with SSRS reports, I would like to store the URL once in a variable environment level and have all read reports from there. How this could be done. I think that by adding the resource file, that this might work. But how do we identify which URL should be invoked in varied such as DEV, TEST, PROD environments?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/

  I hope this helps!

• multiple choice with partial credit question, I have 10 responses only 6 are correct.  How to assign 10 points for each of the six correct answers for a total of 60 points setting?

  How can I assign partial credit so that for each possible answer 6 out of 10 each correct answer gets 10 points each, with a possible total score of 60 points quiz?

  To Captivate 7, please go to the Quizzing workspace. You will have the properties and properties Quiz Panel visible. I will now repeat the workflow, I explained briefly for CP7:

  • Check the partial score in the Quiz properties and also multiple responses.
  • Indicate the correct answers on the stage
  • Select the first correct answer on the stage text caption and indicate its score (10pts) in the properties panel, not in the Quiz properties!
  • Repeat the same for each correct answer
  • Check the total score in the properties of the Quiz Panel: should now be 60pts to the full question.

  None of the quiz system variables can be changed, they are read-only. System variables in Captivate 6 - Captivate blog explains the system variables for 6 categories, there are a few changes in 7: new features of Captivate 7.01 - Captivate blog but the Quiz category is always read-only.

• How to display three LOVs for a single name

  I have an obligation to indicate three LOVs in a form to be displayed alongside (instead of each item in a separate column). The name is common for all three LOVs cascading and I also have other items of apex in the same form that appears as two components of apex by each line. The display format is something like...
  
  Item1: Tex Item2 field: text field
  
  Item3: Radio button Item4: text field
  
  Item5: Text box
  
  Item6: LOV1 LOV2 LOV3
  
  any ideas are appreciated.
  
  Thank you
  Surya

  Surya:

  It's easy to do. Here's how

  Set the first LOV as you normally would.
  For the second and third LOVs define the following attributes
  Label: Leave it blank
  Start on a new line: NO
  Field: NO

  CITY

• How to assign the password for different SSID in embedded AP - w1941 Cisco

  Hello

  Can someone tell me the configuration of the CLI of assinging for SSID password created in cisco integrated access point 1941.

  If so, then can we use WEP encryption on cisco 1941 AP?

  Yet one thing, I get the message click the SSID that "information sent over this network might be visible to others" what does this mean and how to solve this problem. Thank you

  Gotcha!

  The command is...

  encryption [vlan vlan-id] key 1-4 size { 40 | 128 } encryption-key [transmit-key]
  
  We need to map the Vlan for each SSID..
  So the comand will be..
  encryption (vlan vlan#) key 1 size 40bit 7 F3546E765203 transmit-key
  We need to make sure that... under the SSID, we have mapped the coresponding vlan..
  that is.. if you have a SSID by name XYZ and you want the clients to get the IP from vlan 10.. then the config will be..
  en
  
      config t
  
      dot11 ssid XYZ
  
      vlan 10
  
      auth open
  
      mbssid guest-mode
  
      end
  config t
  
      int dot11 0
  
      encryption vlan 10 mode wep mandatory
  
      encryption 10 key 1 size 40bit 7 F3546E765203 transmit-key
  
      no shut
  
      end
  and followed by the subinterface commands.. and the same should be done for all the other SSIDs with different VLAN mappings and keys.
  let me know how this works out for you!!
  Regards
  
      Surendra
  
      

• How to assign the button for quick access to text elements.

  Hi gentlemen,
  I can assign the button quick access or alt + tank to no push button giving etiquette like E & xit, then x is under broadside.
  but I want to use the access key to a text element as
  my name < text box for my name >
  I want under the name fast and if I press alt + N, then it should go to point text myname.

  You can use a push button and joint access required for which your key and keep the 1 height and width 0
  as soon as you press the desired key combination it will be press this button
  Then, you need to write on trigger when key pressed for this button to go_item('sss') where the sss is the destination text.

• How do I change name of file for HTML single image pages in the web gallery for LR 3

  Hello

  I would like to change the file name by default for HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to withdraw the name of HTML in the 'great' chain file so it exactly corresponds to image file.

  Specifically, the default URL is like this:

  http://www.mysite.com/content/_c_EMT2146_large.html

  and I wish it were like that

  http://www.mysite.com/content/_c_EMT2146.html

  I guess that there is a way to make this change by using model editors, but I can't understand it.

  Thank you

  James Riemermann

  On Mac LR is provided as a package. You must Show Package in the Finder, and then work down to:

  \Contents\Plugins\Web.lrmodule\Contents\Resources\Galleries.

• Satellite M70 - how to assign administrative rights for the user account under Win XP

  I have a Toshiba SatM70 using Windows XP, don't know how but I lost administrator access and using a regular limited account.

  I can't seem to get back to be the administrator and must because my anti virus protection picked something, but I can't fix because I get a message saying you are not logged in as administrator.

  Can someone help me to find out how to return to be the administrator please? Thanks in advance.

  Lesley Ann.

  Hello

  Please check if you can change user account.

  Go to control panel-> user control accounts-> click on user account you-> change the type of account-> admin rights

  Good bye