How to avoid the table headers to be split across several pages?

Similar Questions

• How to avoid the stalemate between count with all and several calls from an EP getBackingMapEntry...

  We have a processor input, which initiates a transaction lite by calling getBackingMapEntry on several similar entries.  The same cache distributed these similar entries of accommodation also simultaneously services count with all call and we often a blocking scenario comes from the fact that the count with all call trying to access/key in the same cache block - but in a different sequence - date entry processor accessed (for example, the European Parliament access to similar input 1 then similar input 2 while the count with all attempts to block the same but entries in sequence 2) then the entry 1).  The obvious solution is to change the sequence entry processor accesses these entries to match the sequence used by the count with all operation, but we do not know what sequence consistency applies to operations NamedCache.getAll.  Anyone know?  We believe that we excluded (e.g., consistency does not consider wrt the count with all access sequence) the following:

  • The sequence in an ordered collection of keys such as a list that is passed as an argument to count with all operation
  • The hash code of the key value
  • Any use of Comparable on the keys

  We use 3.7.1 consistency where it varies between 3.7.1 and 12 c.

  Thanks in advance.

  We've thought of it (always happens shortly after the publication on a support site).  If anyone is curious, it seems that the binary class implements Comparable and that consistency sorts instance converted by binary key and access the Scriptures based on this order sorted.  If the entry processor converts the keys to binary instances, sorts and accessed in sorted order, there is no potential blocking (of our observations, at least).  It would be nice if Oracle should document this that people better understand how to write safe concurrent code.

• How to avoid the report query needs a unique key to identify each line

  Hello

  How to avoid the error below

  The report query needs a unique key to identify each row. The supplied key cannot be used for this query. Please change the report attributes to define a unique key column.

  I have master-detail tables but without constraints, when I created a query as dept, emp table he gave me above the error.

  Select d.deptno, e.ename

  by d, e emp dept

  where e.deptno = d.deptno

  Thank you and best regards,

  Ashish

  Hi mickael,.

  Work on interactive report?

  You must set the column link (in the attributes report) to something other than "link to display single line." You can set it to 'Exclude the column link' or 'target link to Custom.

• How to avoid the SORT operation.

  Hi gurus,
  
  Oracle version is 11.1.0.7
  
  I have a select query that has Row_number() over (Partition of col1, col2 order by col1, col2 desc nulls last) function to eliminate the DUP on these two passes.
  
  Here it costs 4639 for sorting. Now, I added a two other columns in the query Select (has not changed the Row_number analytic function).
  
  COST of sorting is now 555635.
  
  This sort operation may use Temp table space. How to avoid the cost of SORTING.
  
  Note: I use the function analytical only to eliminate duplicates on Col1 and Col2 only.
  
  How to sort takes a large part of the COSTS by adding only two columns in the select list.
  
  
  Any Suggestions...?
  
  
  Thank you
  Mike

  I would say:
  1 don't worry unnecessarily about the cost of sorting - do you know if you have a problem.

  2. in general, eliminate from the beginning, sort late (i.e. After you have eliminated all you can)

  3. If you are concerned by the outpouring sort on the disc then you could go to manual management of pga (assuming that you are currently using automatic) for this particular operation and override sort_area_size.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Camileo S10 - how to avoid the 'information' during video playback on TV

  I just received my Camileo S10... very nice indeed... but how to avoid the track and reading data to be shown on the screen during playback on my TV...?

  Go to the movies, then before you start playing click the OK button. This also works when you save. You must do this before playing or recording.

• How to avoid the launch of Labview VI when he invokes in Teststand environment?

  Hi, friends.

  I am a student of teststand. I wrote a few screws by Labview. Now, I want to invoke in teststand environment.

  But when I run the sequence. LabVIEW automatically launches.

  How to avoid the launch of Labview when I run the sequence?

  Thank you.

  LabVIEW programs require a runtime engine. Under the TestStand configuration drop-down, select adapters. You can change the LabVIEW adapter to select the runtime rather than the development system.

  This should prevent the main screen of LabVIEW to appear, but you will not be able to change your LabVIEW VIs while they run of TestStand using the runtime engine.

• How to avoid the launch of Labview when called by Teststand VI

  Hi, friends.

  I am a student of teststand. I wrote a few screws by Labview. Now, I want to invoke in teststand environment. But when I run the sequence. LabVIEW automatically launches. How to avoid the launch of Labview when I run the sequence?

  Thank you.

  I'm not sure that I follow what you're saying...  But it seems that when the VI is called, the LabVIEW Development software is started and you want to avoid this.

  If you create an executable file or a dll and that any call within TestStand, she should not call the development environment.  You must have the LabVIEW runtime engine installed on the target computer.

  For several years I used TestStand with LV, if my memory does not have to be precise.  I think that the above worked for me.  However, it seems that I remember something to have the LV code in debug mode, causing to open development environment... but it's a distant memory.    You do not use breakpoints where the LV VI is called, are you?

  R

• How to clear the table dhcp clients

  Does anyone know how to clear the Table of Clients DHCP?

  I have a WRV54G.

  Concerning

  I understand this is a very old post, but since I found it when I was looking for the same answer in 2009, I thought go ahead and give my $.02 worth.

  I have a different router, so it may not be present in your.

  I use a version of the firmware WRT54GLwith 4.30.7 and finally found on the status under "Local network" page a link to the DHCP table. You can click on that and delete existing IP addresses.

• How to avoid the minimizin of the screen when the user down ups slide

  How to avoid the minimizin of the screen when the user ups the down slide.

  Hello

  I guess that not possible because this is a feature of the system. Be able to substitute the blow to the gesture of bottom up would mean for combat when a user can switch to another application. It is not something that an application must be able to do it at all.

• How to avoid the string * empty * on new pushScreen

  Someone knows how to avoid the string * empty * coming on each press of the screen and instead * void * can I have my own channel at the same place... Please let me know its possible or not...

  

  Thank you

  read the API:

  http://www.BlackBerry.com/developers/docs/4.7.0api/NET/rim/device/API/UI/component/ListField.html#se... (java.lang.String, int)

• How to avoid the color address IOS in email HTML Template?

  Hello

  How to avoid the color address IOS in email HTML Template?

  Thank you

  Rahul Bhambri

  Hello Rahul,

  Please use css in your style sheet

  a {[x-Apple - detectors of data]

  color: inherit! important;

  text-decoration: none! important;

  font size: inherit! important;

  Police-family: inherit! important;

  Police-weight: inherit! important;

  line-height: inherit! important;

  }

  Thank you

  edynamic expert Eloqua

• How to know the tables used in packages of a schema.

  How to know the tables used in packages of a pattern that I have connected.

  SELECT DISTINCT referenced_owner, referenced_name

  Of all_dependencies

  Owner WHERE = "MY_USER_NAME".

  AND type ('PACKAGE', 'BODY of PACKAGE')

  AND referenced_type = 'TABLE '.

• Question CP9: HTML5: Apple: Android: how to avoid the click on the Play button / tap?

  Hello

  Captivate 9.0.0.223: HTML5 draft.

  I'm sorry to ask this question, it's a little old chestnut on HTML5 in Apple iOS and Android.

  I have searched on the internet and forums for a solution underway, but could not find something that works.

  The problem is how to avoid the PLAY button, which forces the user to click / tap on it, when the project is accessible on an Apple or Android system.

  

  The project will be published on the internet for use on any Windows, Apple or Android device.

  I have no control over the Web server or devices that will use the people, so that any changes to the software server or browser is out of the question.

  I have tried both a plain HTML5 and a responsive project, but neither avoid the Play button. I put an example of 1 slide on these links.

  http://www.hoffits.com/test_responsive/index.html

  http://www.hoffits.com/test_html5/index.html

  The bottom line is: ' is it possible to remove the need for the user to click / press the Play button?

  Thank you.

  Peter

  Cardiff

  In Wales

  UK

  In your normal HTML5, there is a line (I think it's 46) with this code:

  CP. DoCPInit();

  Add cp.movie.play (); Located below.

  so:

  CP. DoCPInit();

  CP. Movie.Play ();

• How to avoid the glossy look and brilliant nostrils?

  I just built my first character of fuse and when I import into Photoshop, its nostrils are incandescent - as if the light shines through the back of his head!

  This fuse:

  

  Becomes this in Photoshop:

  

  I use a brush to set the nostrils, but have no idea how fix eye - of the suggestions?

  Even better - any ideas on how to avoid the glossy look and glowing nostrils?

  Thank you very much
  Malcolm

  Hey, Malcolm.

  Best way to explain what basically rendering 3D correctly really takes a lot of time, haha.  So that you may be able to work with the real-time 3D model and make changes quickly, we use two different rendering methods.

  There is an "Interactive" mode which is not like the beautiful light/shade, but is very fast - and that's what you see when you interact with the default template.

  Then, there is a mode "Raytraced" which is much more advanced calculations and stuff to give you a proper lighting / shadow.  Raytraced rendered may take time if so we can not use it all the time.

  In order to get the lights/shadows appropriate you need to perform a path Ray would make on the document.  Best way to do this:

  • Select your 3D layer in the layers panel
  • Make a selection in the drawing area to the area that you want to make (I recommend to test rendering of area to check the lighting/shadows before committing to make the whole layer).
  • Push the button is rendered at the bottom of the properties panel (it looks like a cube in a rectangle box, right next to the delete icon).

  There are other things that you must do if you want to get the best image search quality such as the addition of secondary lights!  You can add more lights in the 3D Panel using the small icon of light at the bottom.  Have 2-3 stage lights and adjusting their colors can make a big difference with the Assembly of your character in the scene.  Here is a small image for some comparisons:

  

  You can see the image with two lights a look much more realistic lighting and shadows and raytraced of one and two versions are much nicer and cleaner!

  Hope that helps!