How to blur a part of the tree?

Similar Questions

• How to highlight the part of the tree?

  Hello everyone!

  I have a question: how to highlight a part of the tree on a condition? (please see the attached vi and the pictures for a clearer explanation of the problem)

  I'm using LabView 2014.

  Thank you very much!

  

  

  

  Have patience.  You only aske the question about 40 minutes earlier.

  You highlight the lines you want by writing the values to the control.  Don't mess with the background color of cell.

  You try to highlight several items?  If so, then right-click on the control and let him choose 0 or more elements.  As soon as you select a mode with the possibility of more than one element, the values of the tree becomes an array of strings, rather than just a string.  You need build an array of strings that you will write to a local variable of the control to highlight the various elements.

• How can I copy parts of the text of a pdf file in preview?

  How can I copy parts of the text of a pdf file in preview? For example, the beginning and the end part of a passage - copy not a few sentences in the Middle

  Select the first part of the text you want to copy. Press the command and option together and also select another passage of text. Now, press command + C to copy the two text selections.

  Hypothesis: The PDF did not limit content selection.

• How to wrap a part of the AIArtHandles to GroupArt

  How to wrap a part of the AIArtHandles to GroupArt

  Here's a small sample:

  AIArtHandle bindGroup, clipGroup;

  AIArtHandle clipPath.

  FixedRect placedBounds;

  AIPathSegment clipSegments [4];

  AIPathStyle pathStyle;

  This group will link the mask and oppose all

  error = sArt-> NewArt (kGroupArt, kPlaceAboveAll, Nile, & bindGroup);

  This group will define what objects are hidden. Its mandatory character

  will be lost when the group is formed by a group of clipped

  error = sArt-> NewArt (kGroupArt, kPlaceInsideOnTop, bindGroup, & clip-

  Group);

  Create a path to use as a clipping path. The path is the

  first element of the group to be made into a clipped object.

  error = sArt-> GetArtBounds (art, & placedBounds);

  SetClipSegments (& placedBounds, clipSegments, false);

  error = sArt-> NewArt (kPathArt, kPlaceInsideOnTop, clipGroup, & clip-

  Path);

  error = sPath-> SetPathSegmentCount (clipPath, 4);

  error = sPath-> SetPathSegments (clipPath, 0, 4, clipSegments);

  error = sPath-> SetPathClosed (clipPath, true);

  The field 'clip' PathStyle must be set to make this work

  error = sPathStyle-> GetCurrentPathStyle (& pathStyle);

  pathStyle.clip = true;

  error = sPathStyle-> SetPathStyle (clipPath, & pathStyle);

  Objects below the clipping path are cut (assumed that art is valid)

  error = sArt-> ReorderArt (kPlaceInsideOnBottom, clipGroup);

  tell Illustrator to put the group previously defined in a cup

  Group

  error = sGroup-> SetGroupClipped (clipGroup, true);

• 2 How to remove an element from the tree and the database block tree?

  Hello
  
  2 How to remove an element from the tree and the database block tree?
  
  Kind regards
  
  Abdetu...

  The problem is caused by not sending forms is not a VALIDATION of the database because he thinks that there is no changes to save.

  Forms does know that changes to the data block, he does not know the changes made by the PLSQL INSERT, UPDATE, DELETE calls and procedure.

  Try to remove the line to block, rather than using a DELETION like that...

  go_block ('INSP_EQUIPMENT_TYPE');if form_success then   do_key ('DELETE_RECORD');end if;
  
  
  

  If you wish to continue using your original DELETE instead of my change above code, you can use different techniques to force forms to issue the COMMIT to the database, including this one...

          DELETE ...        FORMS_DDL ('COMMIT');
  

  Be careful... This will be the VALIDATION of the database, but the changes to the data block will not be sent to the database!

  I posted a few other ways to issue a VALIDATION of forms here
  www.seeristic.com/Forum_Posts/Forms_COMMIT.txt

• How to use a part of the DRIVE to install ESXi 3.5

  Hi, I'm a lab with ESXi 3.5, I can not use the part of the installation disc. I can do this and dual boot with another OS on the server

  See you soon

  It is very messy and can all screwed if done wrongly. I suggest to install ESXi on the USB key and start from there instead.

  http://www.techhead.co.UK/how-to-create-a-bootable-VMware-ESXi-USB-pen-drive

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• How to make a part of the run of the form

  One of the letters (S) on a logo, I'm train does not seem a good thickness to the sides of the other letters - there isn't a version more "BOLD" so I added a little to make it visually balanced (the text is converted to vectorised text). I would now like to do this part of the run of the form (i.e. no separate line, but the thickness of the letter with the race). I'm sure that I saw how to do this before, but can't seem to find now... can you help me? Thank you very much.

  Caroline,

  You can perform > path > offset, which keeps the form original and complete form editabilty, always without applying a stroke.

• How to lock a part of the curve for a single is affected?

  How can I lock parts of a curve so that when I move a point that they are not concerned?  I'm sure I used to be able to do that, but I'm wrong or I forgot how. In the example below, I want to move the point circled in red while leaving the rest of the curve to the right. I don't want the items highlighted in yellow to deform when I move the red dot

  

  

• How to select a part of the message under macOS Sierra?

  In previous versions of Mac OS x, I was able to select a part of the message (text / iMessage) in the Messages application. Now, if I try to do the same, Tapback is enabled. It's really annoying, as I often have to copy the entire message body, paste into an editor and then to do the editing.

  Which should not happen if you simply select the text of the message by double-clicking or click-and - drag. That action works the same way it always has.

  Tapback happen if you press and hold - in other words, if do not quickly move the cursor.

  If you are still unable to work, please review your Trackpad preferences. Maybe change a setting arbitrary will correct what you are experiencing. Check accessibility > mouse and Trackpad in the same way: change a setting to determine if what it fixes.

• How to order new parts to the A60?

  I was wondering if anyone knew where you can order new parts to the A60. At the moment my A60 is in bits... My dog stood on the HQ at the back and broken the internal pin connector.

  I removed the part by removing the soldering of the component that was relatively easy to do... but now I have to find the new part which is not so easy. The part is relatively simple, so I imagine quite cheap so I thought fit it me and save the repair bill which I couldn't justify paying on such an old laptop. I searched this site to find an email support but can't seem to find one anywhere.
  All ideas are welcome.
  Thank you.
  Snoot.

  Hello

  You can contact the authorized Toshiba Service partner and from here you can order all the parts that are compatible and supported for your laptop.
  On this site you will find the ASP that is responsible for your country.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good bye

• How to increase line spacing between the tree of elements in a modern tree control

  I have a VI where I used a tree of modern pallate control, that I need to increase the space between the elements of the tree. and should be retained, even if I have to add or remove items from the tree

  PS: Property "AutoRowHt" doesn't seem to help here

  Unfortunately, I didn't have time to play with or not this propgates of new entries created in the control tree programmatically, but if not, you could always just to revive this section of code (or specify the specific line because you'll know that the index of the inserted item).

  

  Specification-2 in the number of line property will specify that the change should be made for all rows in the tree.

• Is a part of the tree of his own brothers and sisters?

  I have a routine that takes an item in the tree selected by a user and loop through all brothers and sisters of the element:

  itemRelated = TRUE;treeItemToTest = 0;
  
  while ((itemRelated) && (treeItemToTest < totalTreeItems) &&     (treeItemToTest >= 0))
  {
      /* Check if file is related to the selected file */
      AreTreeItemsRelated(panelHandle, treeHandle,
          treeItemToTest, VAL_SIBLING, selectedTreeIndex,
          &itemRelated);
  
      if (itemRelated)
      {
          /* process the item */
          /* ... */
  
          ++treeItemToTest;
      }
  }
  

  Somewhere between the current version and CVI 2012, our program has stopped working properly.  I traced the problem to the call of AreTreeItemsRelated in this routine.  In the latest version of LabWindows, this call returns FALSE if treeItemToTest and selectedTreeIndex are from the same point.  This is apparently a change in behavior of CVI, 2012, but it is not documented in the help of the function.  This change was deliberate?

  Yes. You are right. You have run into a scenario that can be very difficult to work around. We try very hard to never break compatibility with older versions of the execution, but sometimes it's inevitable, as in cases like this where a bug is fixed in a new version. Problems occur when there are existing programs which are assuming the existence of this bug and would actually break if it were not for the bug.

  The best way to avoid this situation is to use a specific flavour to the version of the runtime of the CVI. It has its drawbacks, of course (for example not automatically benefit from bug fixes in the run-time), but he could sure complicated deployment.

  Of course, who isn't really help you now, since your 'program #1' is already deployed using shared execution. Having said that, the best you can do is to replace it, what you can do without uninstalling all of its dependencies, by following these steps.

  Luis

• Issue of APEX 5.0: symbol of continuous loading when using parts of the tree with Mobile Applications

  I use a use of a region of the tree Mobile Application. The tree implementation is defined on Tree APEX.

  When I run the Application, I get a symbol of continuous loading.

  When I use the same SQL, region and implementation in a desktop app it works fine.

  I can't get it working on a Mobile Application with the implementation of jsTree.

  bug?

  Hi Matt,

  The area of the tree is not supported for mobile pages. If you use the new page Wizard to create a mobile page, you will see that it is not established that the area of the tree. It only appears if you decide to display unsupported. What seems like a bug, it's that the tree is displayed in the Gallery of areas of the page designer.

  The implementation of the tree of the APEX (widget.treeView.js) is a jQuery UI widget. Even if the core of widget in jQuery UI and jQuery mobile are essentially the same tree view widget has additional dependencies such as $. UI.mouse. the reason why the old jsTree can work at least a little, is that it is a jQuery plugin not a jQuery UI plugin (if I remember correctly).

  I also think that on a small phone size screen that a tree would not work so well.

  Kind regards

  -John

• Part of the tree with trigger WHEN MOUSE DOUBLECLICK does not work

  Hello
  
  I have the element of the tree to the form with dynamic data, these data extend to these point and maybe see the rim under this field, if the tree node show in the tree after scrolling element these point relaxation WHEN MOUSE DOUBLECLICK does not work.
  
  Any suggestion?
  
  Thank you

  I would use the WHEN-TREE-NODE-SET-trigger

• How pre-made only parts of the timeline or the selected clips?

  I move from Vegas Pro in Premiere Pro. In Las Vegas, you select a part of the timeline, and then press CTRL-B and that it makes this segment.

  First, you press on enter, but he does not pay attention to the selected clips, she makes just before the entire sequence.

  This would not be a big problem except that I'm managing projects that are long enough, with 20-30 sequences and sequences 20 or so nested in each project and I spend between about 18 different projects for a series of videos 23 or almost.

  These videos are already taxing my system resources with only a few minutes or so (referencing about 80 to 120 GB of the source footage), but my desktop computer is a little weak.

  The problem is that when I have pre-made a nested sequence and bring on the main timeline, I pre-rendered it * again * after the next series of adjustments (ie the color correction, transitions, etc). So, I have to do AGAIN when I copy it to another scenario for a similar project.

  Each time, it may take as long as 15 or 20 minutes (my graphics card is a nVidia GTX 560 Ti, there CUDA, but prem does not support a reason any).

  When my script main glitched out, forcing me to divide it into different projects, it took me almost 4 hours just to copy things up with another 20 minutes to load the file glitched.

  Then I had to go and pre-made everything new to work my edits in place.

  Even if everything is properly set up to 90%, I still have to wait for the entire sequence finish the pre-rendered.

  As above, in Vegas Pro, I simply select a part of the timeline and the sticks of pre-rendered to this area.

  I saw an article that said that you might create on edge and use it for rendering, but it doesn't seem to be something CS6.

  I heard that Adobe was trying to maintain CS6 as a parallel to CC thing. Surely I don't have to move to a subscription of 600 $par year just so that I can pre-made parts of the script as a low-end competitor program has had something like 5 years...?

  What Miss me? There must be a way to do it simply.

  You should uncheck the workspace toolbar in the Menu of the Panel (upper right corner), the timeline.